Used Hacker Knife for sale (1,494)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Dedez Dv Uyjpfx Ab Njwc Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability Dsdpfx Ajz Ea Itjb Nowc • Maximum matrix waste roll diameter approx.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer Dodpfsz Dta Tjx Ab Nswc 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Dwodpfx Ajz A Ti Eob Nec Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, Dwodpfx Aex Ecwmeb Nsc - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Djdpfeiiyppox Ab Newc Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump Dodpfx Aozx Rkzeb Njwc - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers Dwedpfszx Suuox Ab Nec - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES Djdpfx Abjztpmqs Njwc – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 220 V, The JAC Eco+ 450 (also referenced as the ECH 450/99) is an automatic, mobile bread slicer manufactured by JAC Machines, featuring their patented Intelligent Slicing Control (ISC) system. This machine is suitable for slicing bread with a maximum dimension of 440 x 160 mm. Key Features Intelligent Slicing Control (ISC): An automatic pressure and slicing speed regulation system that adjusts cutting parameters based on bread consistency without requiring manual adjustments. Jacflaps: A specialized mechanism that holds the loaf together securely to make unloading seamless. Loaf Pusher Heights: configurable with Extra low (50mm), Low (80mm), or High (100mm) The slicing thickness is 14 mm. Amperage: 4 A Frequency: 50 Hz Power supply: 230V single phase Blade/Knife Count: 34 knives Working width: 450 mm Blade dimensions: 13 x 0.5 mm steel Max. Loaf dimension: 44 x 31 x 16 cm Motor power: 0.49 kW Noise level during operation: < 70 db Surround environment temperature: 5 to 40°C Surround relative humidity: 30%-95% With metal & plastic crumb tray: 18-liter capacity (accessible via front tilting door); Outside dimensions: length 600 mm x depth 750 mm x height 1300 mm Machine weight 180 kg This machine is in good condition Video: Price Euro 1.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Dsdpfx Aboz Evimo Newc Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE Dwsdpfx Abov I Saye Nec LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: excellent (used), Catalog number 7739 TECHNICAL DATA PLANER: Dwodpfx Aezx R Tcob Njc - cutterhead width 410mm - 3-knife cutterhead - noise-reducing comb - cutterhead guard - adjustable angle guide - table length 2060mm - both tables adjustable THICKNESS PLANER: - max. thickness of workpiece in thickness planer 240mm - thickness planer cutterhead guard *from top: - pawls - infeed roller, toothed, with twist - pressure rollers - planing roller - pressure roller - outfeed roller, smooth - 2 adjustable rollers in the lower table - main motor 5.5kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter 120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES – Made in Italy – Noise-reducing comb – Unpainted – Excellent condition – Used planer-thicknesser Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7762 TECHNICAL DATA PLANER: - cutterhead width 320mm - 3-knife cutterhead - max thickness of the workpiece 180mm - guard for the planer cutterhead - from top: – feed rollers – toothed feed roller – cutterhead – smooth feed roller CIRCULAR SAW: - max blade diameter 300mm - max cutting height 80mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 270mm - table dimensions 750x460mm - guide ROUTER: - spindle 30mm Djdpjzx Sf Hefx Ab Newc - spindle adjustable up/down - spindle height 100mm - guide - diameter of dust extraction nozzle 100mm - dimensions L/W/H 1700x2400x1100mm - weight 340kg ADVANTAGES – Bulgarian production – very good condition – multi-functional, used Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 230mm - 4-knife roller from top: - pawls - toothed feed roller, pull type - pressure roller - planing roller - pressure roller Dodpfxeztxmys Ab Newc - smooth feed roller, pull type, metal - 2 adjustable sliding rollers at the bottom, mounted on the table - 5.5kW motor - electric table lifting, approx. 0.25kW - 2 feed speed types, 0.75kW - diameter of extraction nozzle 160mm - dimensions (L/W/H) 1320x1270x1380mm - weight 903kg ADVANTAGES - made in Germany - used thickness planer, very good condition Net price: 21900 PLN Net price: 5093 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR Dwodpfozxhdfox Ab Nec (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings Dodpfxsztalqs Ab Newc - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Dwsdjz A Ufzjpfx Ab Nec Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg SCM Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Dodpswzmu Dsfx Ab Nswc Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence Dwedpjz Ig Niofx Ab Nec The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Dwjdpfez Ai T Ajx Ab Noc

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Dwjdpfx Absz Ai T Ne Noc 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Djdpfx Aboz Ai U Tj Newc 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during Dwodpfxsv T Trus Ab Noc work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Djdpfx Absz Hmtxo Newc Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz CE marking + includes Blower

Condition: used, Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Taschen-Falzmaschine - Buckle Folder Heidelberg Stahlfolder TH82-6-6-VFZ 16 Seiten Seitenfalz - 16 pages cross Fold Walzen 2020 erneuert / Rollers 2020 renewed Year 2013 - Serial-No. FH.FAW0-01500 Rundstapelanleger / Round Pile Feeder RFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 6 buckles - 6 buckles - 1 VFZ 52.D Knife Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SPH-70 Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Dwjdpfx Abjzzw I So Njc On Stock Emskirchen/Nürnberg - Available Immediately - Can be test