Used Hall for sale (707)

Condition: used, functionality: fully functional, machine/vehicle number: 001661U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 6,300 kg capacity. Ref. 001661U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! We can supply our offered cranes, if desired, including: * Adjustments in length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control Gkodpfjzildqex Al Uec * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001663U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 16,500 mm span x 10,000 kg capacity. Suitable for outdoor use. Ref. 001663U * Technically 100% in order and inspected. All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: Godpjzilfuefx Al Uekc * Adjustment in length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: refurbished (used), Year of construction: 2022, operating hours: 169 h, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Bp Pack D51 is from 2022 and has 169 operating hours. It has been completely overhauled by us, with each component being cleaned and tested for functionality. Gkjdpeziml Nsfx Al Uec The Kärcher B40 W features a continuously variable drive, which greatly simplifies operation. The controls are also intuitive, eliminating the need for lengthy training sessions. New, maintenance-free gel batteries are installed, and these can be conveniently recharged using the integrated charger. The suction foot was sandblasted and powder-coated in our workshop and fitted with new suction strips. A new brush is included in the scope of delivery. The Kärcher B40 W Bp Pack D51 is suitable for daily cleaning of, for example, workshops, halls or shops. Technical data: Working width: 51 cm Tank volume: 40 liters fresh / dirty water Area performance: approx. 2000 m²/h

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading Gkodpfx Alozhvagj Uoc 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Gkedpjzkr Dtjfx Al Uec Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Gjdpfxszqzyqs Al Uskc Element width: approx. 1.03 m Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 45m2, 2 rooms – used: Gjdpfx Aszqzzuol Ujkc Price from location: €6,500 (net), disassembled, packed, and loaded! Item 6: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible with a maximum person load of 100kg Element width: approx. 1.03m Length: approx. 9.71m (9 elements, plus 1 narrow one) Depth approx.: 4.66m (4 elements, plus 1 narrow one) Height: approx. 2.96m 2 doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Gkedpfx Alszrlzze Usc Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW Gkjdpfx Aljy Tkfwe Uec - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Speed class: 4 Technical condition: New Battery condition: New Gksdpfx Aljzvkaqo Usc Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GS-1932m E-Drive is a compact electric scissor lift for working at height indoors and on solid surfaces. With a working height of up to 7.55 m, a narrow design, and a modern electric drive, this machine is ideal for maintenance, assembly, and installation work in halls, warehouses, or confined work areas. It is quiet, energy-efficient, and easy to operate. Further information and a non-binding inquiry can be found on our website – safe working at any height.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE Gedpfx Alezwmype Uekc -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Gsdozd Rmgopfx Al Uskc Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Gsdpfx Alszf Hn Ae Uokc Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! Gksdpfxszcqy Ee Al Usc The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many years of excellent service!!

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Model: E20PH-02 Year of manufacture: 2020 Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Gjdpozcrv Usfx Al Uskc Equipment: Triplex mast Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Gkodpjzv Sx Iefx Al Uoc

Condition: good (used), functionality: fully functional, overall weight: 32 kg, Gechter 8/12 kN HKPV toggle press Adjustment range: 220 mm Overhang: 120 mm Table: 200 x 167 mm Mounting bore: Ø10 H7 Other models are also available. Godpoz Iraasfx Al Ujkc Shipping via GLS parcel service, freight forwarder, or collection in 06112 Halle is possible. Sale to commercial customers only, with exclusion of warranty.

Condition: excellent (used), Corner sealing machine with shrink tunnel For sale is a professional, semi-automatic corner sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. Godsz Dtf Aepfx Al Uekc It is ideal for quickly and professionally shrink-wrapping cartons, books, bottles, textiles or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The corner sealer uses a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculating air system with adjustable air deflection plates. This ensures a completely uniform heat distribution and a perfectly smooth shrink result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar and the tunnel temperature to be precisely adjusted to the film thickness used (PO, PE or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid belt. It reliably transports even heavy packaged goods (e.g. printed materials, canned goods or wooden parts). Ergonomic infeed table: The separate, mobile preparation table enables quick loading of products into the half-tube film. The film unwinding is smooth and easy thanks to ball bearings. Perfectly suitable for printing companies, logistics centers, laundries or contract packers for shrink-wrapping: - Cartons and multi-packs - Books, catalogs and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & equipment: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Corner sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid belt in the shrink tunnel Power supply: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design in the tunnel passage) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Gkodpfx Aez Ahurjl Ujc Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 384 h, functionality: fully functional, overall weight: 1,100 kg, HAKO SWEEPMASTER B1200 RH Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New NEOS 24V 50A charger New air filter Year of manufacture: 2016 Machine operating hours: 348 A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results. A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping. The machine is equipped with a large debris flap for collecting larger waste items. The unit has undergone a comprehensive, meticulous overhaul; operating fluids and parts—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each machine we offer is photographed individually; you are buying the exact machine shown. TECHNICAL DATA: Model: Sweepmaster B1200 RH Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Gkjdpsz Ahwyefx Al Uoc Weight ready for operation (kg): ~ 1100 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Debris hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area The Sweepmaster B1200 RH sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level car parks, warehouses, production facilities, and outdoor areas Battery power ensures high flexibility, allowing for operation in enclosed spaces, buildings, and warehouse halls Large working width (1150 mm) ensures high... area coverage Highly legible and intuitive control panel.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 622 h, machine/vehicle number: GS4610C-381, load capacity: 454 kg, lifting height: 790 mm, platform length: 226 mm, platform width: 115 mm, overall weight: 2,469 kg, empty load weight: 2,496 kg, transport length: 241 mm, transport width: 117 mm, construction height: 168 mm, next inspection (TÜV): 01/2027, fuel type: electric, color: yellow, Equipment: UVV, Electrically powered Genie GS-2646 scissor lift from our rental fleet, manufactured in 2011, used. Compact and emission-free, suitable for indoor and outdoor use on solid ground, e.g., for assembly, installation, maintenance, or hall construction. Gkedpfxsz Ix Rxo Al Usc

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Godpfx Asz A Tl Tsl Uekc Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher Choose the professional TECHNIC series – one purchase, many applications! The TECHNIC JH-005 model is a powerful, versatile single-disc scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain stoneware, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS OF THE TECHNIC SCRUBBER: Model: JH-005 Manufacturer: TECHNIC Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected load: 1100W Disc rotation speed: 154 RPM Power cord length: 12m Steel handle and control grips: Yes Machine weight: 48kg Brush/pad working diameter: 410mm Gksdpfez A Trtox Al Ujc Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic drive plate 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Drain hose for the head 1 x Power cord holder 1 x User manual (Polish and English) APPLICATIONS OF THE TECHNIC JH-005 SCRUBBER The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single machine allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's stature. This enables the machine to be operated in a natural, upright position, significantly reducing fatigue in the back, shoulders, and arms during extended use. An ergonomic handle setting also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. Proper handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The JH-005 model stands out due to its steel handle and grip assembly; this sets it apart from many other polishers on the market, where these components are often made of plastic. The handle is the part most vulnerable to damage, as it is used to guide, lift, transport, and often lean the machine against walls. The use of steel significantly increases resistance to cracking, breakage, and deformation, thereby extending the machine's overall service life. Thanks to the handle's robust metal construction, the TECHNIC scrubber is more durable, safer to operate, and better equipped for intensive professional use.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 942 h, machine/vehicle number: GS3211C-829, load capacity: 227 kg, lifting height: 9,900 mm, platform length: 2,260 mm, platform width: 810 mm, overall weight: 1,984 kg, transport length: 2,400 mm, transport width: 810 mm, construction height: 7,900 mm, next inspection (TÜV): 01/2027, fuel type: electric, color: yellow, Equipment: UVV, Compact, battery-powered scissor lift for work in halls, warehouses, and buildings. With a width of 81 cm, it can pass through standard doors and be operated at full height. The proportional control allows for precise positioning. The tires leave no marks. Godpfx Alsz Hm Rdj Uekc

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,554 h, functionality: fully functional, overall weight: 1,500 kg, HAKO JONAS 1200 E Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New Neos 24V 50A charger New air filter Year of manufacture: 2011 Machine operating hours: 1,554 Built-in warning light and full front/rear road lighting A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping Gedpfx Alsz D D Nxe Ujkc The machine features a large-debris flap for collecting larger waste items The unit has undergone a comprehensive, meticulous overhaul; operating fluids and components—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 1200 E Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~1500 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Built-in warning light Full front/rear road lighting Waste hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 1200 E sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level parking garages, warehouses, production facilities, and outdoor areas. Battery power ensures high flexibility, allowing for operation in enclosed spaces and buildings. warehouse halls A large working width (1,150 mm) ensures high area coverage. Highly legible and intuitive control panel.