Used Headstock for sale (376)

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Djdpfex Hfugex Aftjcd Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dodpfjxxvtusx Aftjcd Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: used, Year of construction: 2009, functionality: limited functionality, machine/vehicle number: B-8023, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th Axis # Rapid traverse speed: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock features: # Spindle distance: 200 mm # Maximum distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal cooling), Tool Holder (Size 40) # Speed range (standard): 100/8,000 rpm, Max torque: 85 Nm at 330 rpm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: Sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. Tool change time (fastest): 3 s. Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: Dsdpfxoxxi Sks Aftocd # CNC control: GE Fanuc Series 31i MODEL A # 4th axis: Nikken CNC180 FA (2012) # Broken tool detection system: Blum Novotechnik # Chip extractor # Lubrication system # Electrical panel cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine condition: OPERATIONAL — with 1 spindle / 2nd spindle defective — can be repaired.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: B-8029, Technical Characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Table surface to floor height: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rate: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock Capabilities: # Spindle distance: 200 mm # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with through-spindle coolant), Tool holder: Size 40 # Speed range (standard): 100–8000 rpm, Maximum torque / at 330 rpm: 85 Nm, 7.5 kW Automatic Tool Changer: # Number of tools: 20, Selection system: Sequential / random, # Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, # Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. # Tool change time: 3 s. Electrical connection: # Supply voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip extractor # Lubrication system # Cooling system # Electrical panel # Spindle cooling system: HARBOR Model: HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine Condition: NOT WORKING # Tool changer: 1 unit broken – needs replacement (not repairable) # Spindles: broken – need replacement (not repairable) Dcodpfx Afsxxiy Ietsd # Hydraulic unit: broken – needs replacement or repair

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: B-8024, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rates: X, Y, Z – 30 m/min # Travel paths: Longitudinal (X-axis) 600 mm, Transverse (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock: Dcodpfxsxxi Ewe Aftjd # Spindle distance: 200 mm # Max. distance from spindle center to table: 650 mm # Spindle interface: ISO 7388 (with internal coolant), Tool holder size: 40 # Speed range (standard): 100 – 8000 rpm, Maximum torque at 330 rpm: 85 Nm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 3 seconds Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4200 kg Equipment included: # CNC control – GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Cooling system # Electrical cabinet # Spindle chiller: HARBOR Model: HBO-750PTSB2 # Documentation: Digital and hard copy available Machine condition: NOT OPERATIONAL # Y axis motor defective – requires replacement (not repairable) # 2 tool changer units defective – require replacement (not repairable) # Spindles defective – require replacement (not repairable) # Hydraulic unit defective – needs replacement or repair

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: Dodpfx Afsxw Tqzetecd IN OPERATION

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Dcjdpfx Ajx Upugjftjd Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1987 Machine no. 2203-2772 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Dcodpjvg Ewcjfx Aftsd Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table Dcedpfou Dm E Hex Aftjd >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: new, The RSM 800 is a precision Conventional Cylindrical Grinder, designed by KNUTH to deliver exceptional grinding performance. Built on a rigid machine frame made of premium cast iron, the RSM series features long support guideways that enhance stability during operation. The machine is equipped with a hydraulic linear feed that offers infinitely variable micro-feeding, ensuring precise adjustments. You will appreciate the swiveling table for taper grinding, while the hydraulic adjustment of the headstock simplifies setup and workpiece exchanges, ultimately minimizing downtime. With a grinding diameter of 8 to 200 mm and a grinding length of 800 mm, this robust machine is engineered to meet diverse application needs. Additionally, it comes standard with essential equipment such as a 2-axis position indicator and internal grinding accessories. For a powerful and reliable Conventional Cylindrical Grinder, consider the RSM 800. Request a quote today and explore how this machine can enhance your grinding capabilities in the realm of Grinding Machines. Dcjdpfx Afsncdx Eotjd

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 Dcjdpfxjwhzcpe Afted ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, Dodpfx Afjvd Dbnstjcd storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), Year of construction: 1999, EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Dedpfxsv S Tx Es Aftecd Serial No.: F1D V00 Year: 1999 Control: Siemens Sinumerik 810M Technical Features: Travels (X, Y, Z): 185, 125, 200 mm Vertical travel (Z-axis): 100 mm Distance between headstock and table surface: 95-195 mm Table: 420 x 125 mm Maximum load on table: 10 kg Spindle bearing: Diameter 40 mm Taper: SK30 Tool clamping: Automatic Motor speed: 5000 rpm Speed range: 150-5000 rpm Maximum cutter diameter: 25 mm Accuracy: 0.00125 mm Number of tool stations: 10 Maximum tool diameter: 55 mm Maximum tool weight: 700 g Dimensions: 1730 x 875 x 1892 mm Weight: 570 kg All machine and numerical control manuals are included.

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Dcodpfx Afox Sw Dqstjd Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Further information: - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)

Condition: good (used), Year of construction: 1994, KEKEISEN Universal moving column milling machine UFF 6000/15, YOP 1994, machine-no. F37642, well maintained, good condition 2-axis automatic universal milling head with autom. positioning in 1°-positions tool holder SK50 according to DIN 69871/872 form B Longitudinal travel of the column (X-axis) 6000 mm Vertical travel of the headstock (Z-axis) 1500 mm Transverse travel of the headstock (Y-axis) 1200 mm Table size 6200 x 840 mm, table load 8000 kg Table surface with T-slots 22 mm, spacing 140 mm Spindle speed 20 - 2000 rpm (infinitely variable in 2 ranges) Axis speeds 4 m/min or 10 m/min (rapid traverse) Dcjdpsnuda Aofx Aftjd CNC control Heidenhain TNC 415 with electr. handwheel HR130 Complete 2nd user interface on the operator's platform that travels with the machine 3D touch probe m&h radio-controlled Tool changer 40 places max. Ø 250 mm, max. 400 mm long Coolant unit (also IKZ, max. 10bar) with 800 l tank + drum filter cladding of the machine table, with chip conveyor between bed and table without fixators, without installation and commissioning Connection data 400 V; 50 Hz; approx. 57 kVA Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders Dodpfowlvlgex Aftjcd • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 200 kg, grinding length: 1,540 mm, grinding wheel diameter: 500 mm, total width: 2,400 mm, total length: 5,445 mm, total height: 1,580 mm, grinding diameter: 300 mm, workpiece length between centers: 1,623 mm, grinding wheel width: 63 mm, grinding spindle motor power: 5,500 W, overall weight: 4,900 kg, pivoting range: 90 °, rotational speed (min.): 32 rpm, rotational speed (max.): 500 rpm, workpiece spindle speed (max.): 500 rpm, Universal Cylindrical and Internal Grinding Machine E450NP x 1500. Manufacturer: JOTES Łódź – 1995. Nominal grinding length: 1500 mm. Max. workpiece length between centers: 1623 mm. Max. grinding length: 1540 mm. Center height: 150 mm. Center height above floor: 1012 mm. Headstock and tailstock taper: Morse 4. Max. workpiece weight between centers: 200 kg. Max. workpiece weight in chuck: 50 kg. Grinding wheel dimensions: external diameter 500 mm, width 63 mm, bore diameter 203 mm. Manual table traverse: 10 mm/rev. Dcsdpfsyhcpvjx Aftsd Smallest table increment: 2 mm. Grinding wheelhead swivel: +/- 90°. Spindle speed range: 32–500 rpm. Grinding wheel drive motor power: 5.5 kW. Total power requirement: 12.5 kW. Machine weight: 4900 kg. Dimensions (L x W x H): 5445 x 2400 x 1580 mm. Equipment (last photo): - 3-jaw self-centering chuck 200 mm, - steady rest 160 mm, - half steady rest, - diamond wheel dresser.

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored Djdpfx Asru Rfhoftocd The headstock sliding guides were recoated and scraped. *

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Dcjdpfxjtrybgj Afted Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. 16 spindle speeds vert.: 60 - 2040 rpm. 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:2 m/s Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Dsdpfx Afjv Armcotjcd Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: used, Year of construction: 2007, operating hours: 20,279 h, machine/vehicle number: IntNr231447, CNC Swiss-Type Lathe STAR SR-20RII, Year 2007 Machine type: CNC Swiss-type sliding headstock lathe Control: Fanuc, Series 18i-TB Power-on hours: 20,279 h Operating hours: 67,058 h Technical Specifications: Machining capacity: Max. turning diameter: Ø 20 mm (optionally up to 22 mm) Max. turning length: 205 mm Main spindle: Spindle speed: up to approx. 10,000–12,000 rpm Power: approx. 3.7–5.5 kW C-axis drive Sub-spindle: Spindle speed: up to approx. 6,000–8,000 rpm C-axis drive Axis configuration: X1 / Z1 / Y1 (main machining) X2 / Z2 (sub-spindle) Rapid traverse: approx. 24–30 m/min Dodpfxex Sv Syo Aftscd Machine dimensions: 2400 × 1205 × 1700 mm Machine weight: approx. 2,200 kg Bar Feeder: Type: FMB TURBO 3-26/3200 Bar diameter capacity: Ø 3–26 mm Mounting version: Type "A" Year of manufacture: 2007 Bar feeder dimensions: approx. 4,500 × 1,000 × 1,800 mm Bar feeder weight: approx. 800 kg Subject to prior sale. Technical data and details subject to change or error.

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: VT0650, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 1,100 mm, workpiece width (max.): 600 mm, workpiece height (max.): 600 mm, number of slots in tool magazine: 32, controller model: 840D, torque: 119 Nm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle motor power: 19,000 W, nominal power (apparent): 19 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: SK40, Equipment: chip conveyor, rotational speed infinitely variable, SPINNER VC1150 travel paths X1150, Y620, Z600 mm in "Compact" version in particularly heavy cross slide design for high-performance machining with patented guide cover concept therefore uniquely low chip fall and small installation area High-performance MILLING SPINDLE up to 10,000 rpm with belt drive for particularly high torque Mmax=119Nm Pmax=16KW for use in universal machining in mechanical engineering PRODUCTION PACKAGE VC1150-Compact Dcodpfx Afsvpf A Rotsd INCREASED SPINDLE POWER from 16KW -> to 19 KW (Pmax) INCREASED RAPID TRAVEL Rapid traverse in X/Y/Z axis increased to 30m/min Tool holder on spindle SK40 DIN69871 with pull bolt DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control system with the following basic features: - Height-adjustable and rotatable control panel for good ergonomics - 19" liquid crystal flat color screen with multi-touch functionality - incl. engraving cycles - 2 GB user memory - 15 zero point shifts - 1 free USB interface - Ethernet interface standard PORTABLE HANDWHEEL SHOPMILL 3D SIMULATION of the finished part RESIDUAL MATERIAL RECOGNITION DXF reader TOUCH FUNCTIONS for integrating measuring probes Energy saving function incl. automatic machine shutdown UNIVERSAL CHIP CONVEYOR VC1150 PREPARATION of the spindle FOR HIGH PRESSURE for use of the additional tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper belt filter for flushing centrally through the spindle Additional blowing air on the headstock Compressed air centrally through the milling spindle Flushing gun in the work area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE Electrical PREPARATION FOR EXTRACTION for the installation of a standard extraction system recommended by Spinner STANDARD DOCUMENTATION GERMAN Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-wire) PACKAGING Notes: The price only includes warranty services within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparable machines Accessories shown such as clamping devices or tool holders are only included in the scope of delivery if they are listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. The prior sale is expressly reserved.

Year of construction: 2024, condition: ready for operation (used), -NEW - 8-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 210 mm MAX TURNING DIAMETER: 20 mm BAR CAPACITY: 22 mm SPINDLE: 50-12000 rpm; 2,2-3,7 kW COUNTER SPINDLE: 50-12000 rpm; 1,5 - 2,2 kW DRIVEN TURRET HEAD: 7 POS TURRET HEAD: 4+4 TURNING TOOLS: n.8 DRILLING TOOLS: n.6 BAR LENGTH: 3200 mm Dsdpjx U E Suefx Aftscd CONTROL UNIT: FANUC 0i-Plus BAR FEEDER: LNS mod. ALPHA 320S3 BAR DIAMETER: 3-23 mm WEIGHT: 3700 Kg OVERALL DIMENSIONS: 2300 x 1400 x 2000 mm ACCESSORIES: PIECE CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; USB PORT

Condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, grinding wheel diameter: 400 mm, grinding wheel width: 50 mm, grinding wheel bore: 127 mm, The motor and frequency inverter for the workpiece headstock have been replaced! Additionally, the control cabinet and wiring diagram have been renewed! TECHNICAL DETAILS Centre height: 125 mm (175 mm with riser blocks) Centre distance: 600 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Grinding wheel bore: 127 mm Swivel range: 270° Workpiece headstock speed: 20 rpm to 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel: 10° Table feed speed: up to 6.0 m/min MACHINE DETAILS External grinding wheel motor: 4.0 kW Workpiece spindle motor: 2.2 kW Dcsdpsyb R Nqsfx Aftsd Dimensions & Weight Dimensions (L x W x H): 2,580 x 1,680 x 1,670 mm Machine weight approx.: 2,700 kg EQUIPMENT New control cabinet and new wiring diagram New motor and frequency inverter for the workpiece headstock 2-axis digital readout Coolant tank Geometry according to Kellenberger protocol Extensive accessories

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available Dsdpfxexq Hk Uo Aftscd