Used Hub Spindle for sale (14,305)

Condition: new, Year of construction: 2026, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW Gsdpfxowak U Eo Al Ujbu 2 to 10-Ton Capacity Available Upon Request

Condition: ready for operation (used), Design: vertical press with four columns. Gbjdpfx Alstty Nke Uju The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer Godpfxsy R I Tms Al Uobu * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Gbjdpfxjzmukuo Al Ueu

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers Gbsdpfx Alofrizte Uju weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) Gsdpfx Aljz Im Hue Usbu - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. Gjdeumtbropfx Al Uobu For more information please contact us.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Gbsdpfx Alsz H Sbbe Uju Dimensions and weight: see manual excerpt (photo).

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. Gbedez Nlzzepfx Al Usu The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: used, machine/vehicle number: W4X133X02132, Year of construction: 2020, operating hours: 3,929 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 800 x 1,315 mm Self-weight: 1,500 kg Battery year of manufacture: Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Rest voltage: 24.9 V Service contract valid until: 03/2027 Operating hours: 3,929 h Gjdpfxez Iwu No Al Usbu EQUIPMENT Formerly a Linde full-service unit Initial lift for double-stack operation Increased ground clearance for uneven floors All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 371

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Gbjdpfey D D S Sex Al Usu Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Condition: new, Year of construction: 2026, functionality: fully functional, pipe diameter (max.): 1,000 mm, A comprehensive range of products: pipes, deflectors, dampers, bends and more at diameters of up to 1000 mm. Gedpozxpg Usfx Al Ujbu

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Specifications, information, price, images, etc. can be found in the PDF documents attached. Gbedpfx Aozuc T Tol Usu

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Gsdpfjzwp Uijx Al Uobu Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Gjdpfxjz Hlpls Al Uobu

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. Gsdoztwr Ijpfx Al Ujbu - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Gbjdpfx Aez Nggrjl Usu

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should Gbodpfoz Df Txjx Al Uou be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), MARTIN T27 Flex underspindle milling machine Spindle adjustable up and down, and at an angle of -46 to +46 degrees, electrically Interchangeable spindle shank, 30 mm diameter Long worktables, 240 cm, with extension Adjustable fence with AIGNER guides 4-roller feed system, WEGOMA 6 spindle speeds: 3000, 4000, 5000, 6000, 8000, 10,000 rpm Gsdpoz N Eywsfx Al Uebu 6 kW, 2-speed motor Brake Very good condition, 400 operating hours

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Gsdpozxx Egsfx Al Uebu Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW Gbedpsz N Sznsfx Al Ueu 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,298 mm, turning diameter: 275 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 15 W, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, spindle nose: JIS A2-8, Equipment: documentation/manual, We are offering this well-maintained CNC lathe, complete with powered tool, sub-spindle and Y-axis. It is a 2008 Mori Seiki NL 2500SY/1250 fitted with the MSX-850-III (Mitsubishi) control system. Technical specifications: Turning diameter: 275 / 366 mm Spindle bore diameter: 80 mm Spindle speed main spindle: 4000 1/min Spindle motor main spindle: 18.5/15 Kw Spindle speed second spindle: 6000 1/min Spindle motor second spindle: 11/7,5 Kw Movement X-axis: 260 mm Movement Y-axis: +50 / -50 mm Movement Z-axis: 1345 mm Movement W-axis (subspindle to mainspindle): 1275 mm Min. indexing C-axis: main spindle 0,001 ° Gbodpsz Nd Dhofx Al Ueu Min. indexing C-axis: second spindle 0,001 ° Number of tools on turret: 12x Number of driven tools: 12 x Spindle motor driven tools: 6000 1/min Tool Taper: BMT Bar feeder LNS Quick Load Servo lll We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Manual spindle height adjustment Gsdpfxjz Nd Iae Al Ujbu Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Gbsdpfxezvnd Ts Al Usu Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach Gbsdpfx Alszk N Iis Uju