Used Synchronous Spindle for sale (13,330)

Condition: good (used), Year of construction: 2007, Details will be provided via email upon request. The following repairs were carried out on this machine by Index:  New collet chuck  New clamping cylinder  New part removal system  New PCU (presumably referring to a Programmable Control Unit)  New display screen  New synchronization spindle Ceds Af Uzzspfx Akteri

Condition: new, I offer SIEMENS synchronous motors in the following versions: 👉 1FE1093-6WV11-1BZ2-Z 👉 1FE1093-6WV1 High-grade built-in industrial units suitable for CNC machine tools and precision drive systems. Codpfx Aoz Sl A Ssktsri Condition: new / old stock (NOS) ⚙️ Technical specifications: Manufacturer: Siemens Type: synchronous motor (built-in / spindle motor) Voltage: 425 V Maximum speed: up to 7000 rpm Cooling: water-cooled Temperature sensor: KTY84-130 Duty cycle: S1 / S6 Protection rating: IP00 Country of origin: Germany 📊 Additional information (for version 1FE1093-6WV11-1BZ2-Z): Power: 16.8 – 21.5 kW Current: 43.0 / 60.0 A Maximum torque: 165 Nm 📦 Included: stator rotor Siemens documentation

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Credpfj Ah S Aujx Aktoi

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes - chip flushing system - accessories: cams + gears Credoz Iz D Ijpfx Aktei - SEMA bar feeder bundle (1989)

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Cedpfozy Spusx Akteri Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request.

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. Crjdpotty Nksfx Aktoi -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Cedpfxoz Sx Nke Aktsri

Condition: used, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 900 kg - Year: 1999 - CE marking present: Yes - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Table width [mm]: 850 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Type: ET117 - Number of wheels [pcs]: 3 - Number of speeds: 8 - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Variable - Voltage [V]: 380 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information Crsdpfx Aks Afy S Hjtji VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! Cjdezy Dzvjpfx Aktori - Availability: available shortly

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Crjdpfx Aozmukusktsi

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: Cedpfjztxt Hjx Aktsri - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height 6 spindles 2 lower 2 upper Left Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Central lubrication Credsztm Huepfx Aktei Plate lubrication First owner 2008 model year

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Cjdpfx Akjz R R Ttjtsri I am offering for sale a Felder F900Z Z vertical spindle milling machine. The machine is in VERY GOOD CONDITION – it has been used sparingly. It is robust and ideal for precise wood processing. Its condition can be seen in the photos; it is ready for use and has no hidden defects. Please contact me.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. Crjdpezt Ai Eofx Aktoi All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Pre-processing Manufacturer:Index Type:A 200 Year of construction:2012 Control system:Siemens 840 D Number of slides:5 pieces Bar feeder:IEMCA Master 880 Chip disposal:Chip conveyor Processing 1 (OP10): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Processing 2 (OP20): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Credpfx Ao Ah Nc Usktsi Coolant supply:IKZ system Linkage: Robots:Kuka Parts transport:Conveyor belts

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Crsdsvbcydopfx Aktei Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. Cedjz Nlzzjpfx Aktsri The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table Cedsztwr Ispfx Aktjri - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has only been used very rarely and has hardly any operating hours. Probably less than 100 operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Spindle speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Crjdpsz Dp Ersfx Aktei Optionally, a matching dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for material defects. No guarantee, warranty, or right of return.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2023001552, overall weight: 550 kg, position of the milling head: Vertical, 2-axis A/C fork, total width: 655 mm, total height: 1,373 mm, mount diameter: 335 mm, type of input current: three-phase, torque: 67 Nm, rotational speed (max.): 24,000 rpm, pivoting range: 220 °, spindle motor power: 42,000 W, coolant supply: 50 bar, power: 42 kW (57.10 HP), Equipment: rotational speed infinitely variable, Unused HSD HST810-M two-axis fork head with ES510 electrospindle, HSD article H8099H0048, built 2023, never installed or powered. Supplied new by HSD S.p.A. (Italy) through HSD’s Australian partner in August 2023 and stored since then in its original HSD crates in a locked warehouse in Melbourne. The head is still sealed in HSD’s VCI bag on its steel transport frame (HSD works order OdL 2013060, production number 2023001552). Head HST810-M: A axis ±110°, C axis ±360°, HSD direct-drive torque motors (A 707 Nm max, C 1,250 Nm max), hydraulic brakes 2,000 / 4,000 Nm, Heidenhain RCN 8380 absolute encoders (EnDat 2.2), 2 arcsec, 180°/s, mass 550 kg, Ø335 g7 machine fitting, overall height 1,373 mm. Electrospindle ES510: HSK-A63, 42 kW S1 / 55 kW S6, 66.8 Nm S1 / 87.5 Nm S6, rated 6,000 rpm, max 24,000 rpm, air-oil lubrication, liquid cooled, hydraulic tool release, Lenord + Bauer 256 pulse 1 Vpp spindle encoder, rotary joint for through-spindle coolant. Included: HSD oil-air lubrication unit CC34250005 (24 V DC) and HSD 3-phase line reactor CCA4050012 (0.4 mH, 130 A), both in their HSD crates, and the HSD installation drawing H8099H0048 with SINAMICS and SIMODRIVE motor parameter sets. Suitable for 5-axis gantry and portal machines for aluminium, composites and light alloys. Siemens-ready; other controls need EnDat 2.2 capable drives. Cjdpe Afb Stsfx Akteri Condition and warranty: unused, 0 hours. The unit is outside HSD’s warranty period and is sold without manufacturer warranty. A pre-shipment run-up test at an Australian spindle service workshop, with written report and video, can be arranged at the buyer’s cost. Inspection in Melbourne by appointment. Terms: price net, FCA Melbourne (Incoterms 2020) in the original crates, payment in full before release by bank transfer or escrow. Export from Australia is subject to an export permit where required; the buyer provides end-user details. Freight, insurance, import duties and commissioning are excluded. Seller: Fleischmann’s Machines Pty Ltd, Melbourne, Australia.

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Spindle diameter: 8mm Table feed: 65mm Table surface: 200x260mm Speed ​​change: Mechanical (stepped stages) Credpfx Akewifguotoi Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital fence indicator: Scala spindle diameter: 30 mm Crjdpfx Akozq Dc Ietoi speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch sustion connection: 2 x 120mm machine length: 1200mm machine wide: 1400mm weight: 1100kg

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach Csdpfjzk N Iijx Aktori

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes Cedpfx Aj Adp H Nokteri • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: used, Year of construction: 1981, Used Machine Year of manufacture: 1981 Features and Technical Specifications: Csdpozk N Dqofx Aktjri - With 2-stage pneumatic lifting spindle - Mandrel diameter: 40 mm - With long table length: 2500 mm - With extendable frame support - With milling stop featuring Panhans metal stop jaws and fine adjustment - Machine must be inspected/overhauled. Basic functions are intact Availability: Immediately Location: Röllbach