Used Swivel Spindle for sale (14,886)

Condition: used, Motor 6 / 7.5 kW Location: Supplier Prodpfow Enw Iox Adyjc

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Pjdpfxjxrbihj Adyerc Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Pjdpfx Asvv H T Redysrc Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Predpfx Ajxac Eysdyoc Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1999, functionality: fully functional, height adjustment type: electric, table height: 860 mm, table length: 2,000 mm, power: 75 kW (101.97 HP), table width: 800 mm, total height: 860 mm, type of input current: AC, total length: 2,000 mm, total width: 1,200 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, opening width: 370 mm, input voltage: 400 V, rotational speed (min.): 10,000 rpm, clamping height: 125 mm, rotational speed (max.): 10,000 rpm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Suva matic Podpfx Adovn Rb Aoyjrc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 80-03/224-02, power: 4 kW (5.44 HP), pivoting range: 45 °, Tilting spindle moulder milling machine Predpjxp Rmkjfx Adyjc

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Psdpfxev Ai N Us Adyorc Storage location: Nattheim

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Prodpfjxbq Ulox Adyoc Weight approx. 700 kg

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Year of manufacture 2007 Prsdpfewudlysx Adyoc

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Predpfxodqzh Rs Adysc Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine is from a correctional facility and has been idle for the last several years. It was used only minimally and operated by a single person. Everything is in perfect working order. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a top-mounted control panel. The fence allows one fence jaw to be adjusted in depth with fine adjustment and scale, enabling tasks such as jointing or glueing profile work. The entire fence can also be depth-adjusted using a handwheel and threaded spindle, allowing for very precise and fast settings. Additionally, one of the two fence jaws is tiltable. Spindle lock is engaged via a lever. Excellent chip extraction with two suction ports: 125mm at the fence and 100mm at the machine table. Equipped with a 30mm spindle, steplessly tiltable from -5 to 45°. The tilt adjustment is electric and displays digitally. Reversible spindle rotation (clockwise/counterclockwise). Nationwide personal delivery and demonstration within Germany for €220—risk-free purchase. Shipping to Austria and the rest of the EU available upon request. Large table opening up to 480mm, adjustable via reducing rings (allows safe machining with both large and small diameter cutters). Four spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with digital display. Table is made from heavily ribbed cast iron. Spindle can be changed (a 40mm spindle can also be fitted). Podpfxoxn A H Ts Adyjrc Very heavy-duty and durable design, built for the most demanding milling operations. Suitable for all milling tasks. Optimal power transmission via V-belt drive. Supplied with manual and documentation. With STEFF 3-roller power feed, type 34. The power feed offers reversible rotation and four feed speeds; the feed rollers are individually mounted. Table size: 1180mm wide x 800mm deep. Ready for immediate operation. 380V, 5000W and 6000W (due to two speed settings). Complete with all necessary safety equipment, motor brake and emergency stop. Certified by the Wood-BG, bears the GS safety mark. Machine weight: approx. 1200 kg. Equipped with motor overload protection switch. Professional-grade equipment, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: good (used), Year of construction: 1989, functionality: fully functional, height adjustment type: mechanical, table length: 2,350 mm, spindle speed (max.): 9,000 rpm, overall weight: 850 kg, space requirement width: 1,200 mm, space requirement length: 2,400 mm, space requirement height: 1,620 mm, input voltage: 380 V, rotational speed (max.): 9,000 rpm, input frequency: 50 Hz, Equipment: motor brake, Spindle moulder with tilting spindle arbor -5/+45 degrees Milling fence with digital adjustment Predsxl Sd Nspfx Adyoc Speeds: 3000/4500/6000/9000 4-roller power feed

Condition: used, Year of construction: 1985, Table length: 2500 mm Spindle travel: 120 mm Table width: 760 mm Design: Tilting Tilt angle forward: +45° Prodpow Aihpofx Adyoc Tilt angle backward: -5° Speed selection: Belt change and pole switching Spindle taper: MK 5 Column material: Cast iron Control panel position: Top Spindle height adjustment: Handwheel and electric Spindle tilt adjustment: Handwheel with dial gauge Spindle lock: Manual Spindle brakes: Electric Spindle rotation direction: Left/right Motor power: 4.7 / 5.7 kW Table opening closure: Insert segment Fence jaws version: Aigner jaws Fence adjustment: Manual Fence display: Scale Cutter jaw adjustment: Manual Power feed unit: Yes, 4 rollers, Haffner Feed adjustment: Fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table Psdeu Nz Ndopfx Adyerc - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Prsdpfowztr Nox Adyoc Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Prjdpor Hr D Nofx Adysc Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, table length: 1,800 mm, power: 4 kW (5.44 HP), Table router FELDER, model F500/06 with table extension on left and right, tilting spindle D=30mm, speeds 3000/6000/8000/10000/15000, motor 4kW, some tools included. Prodpswwq T Nsfx Adyoc

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45 Height and swivel adjustment by handwheel Dial gauges in handwheel motor power 7,0 kW 4 speeds 30mm milling spindle Aluminum stop jaws Milling fence with crank adjustment Long cast iron tables Prodjipv A Tspfx Adyec Safety rulers

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 Pedpfx Adem Tg Ecsyorc S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Milling stop adjustment: Electric / Position control Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Prodpfx Aswhuvcjdyjc Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Condition: as good as new (ex-display), Year of construction: 2023, Spindle tiltable: Yes -45 to 45° Height adjustment: electric Pivot adjustment: electric Stop adjustment: manual Prjdpfxjgr Ufpo Adysc Height display: digital Swivel angle display: digital Milling stop indicator: mechanical counter spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: new, Year of construction: 2025, Spindle swivels: + 45.5° to -45.5° Height adjustment: electric Swivel adjustment: electric Stop adjustment: electric Height display: digital Pivot angle display: digital Milling stop display: digital Spindle diameter: Speeds: infinitely variable from 900 - 12000min¯¹ Power consumption: 7.5 kw Motor brake: Yes, automatic Suction connection: 3 x 100 mm, 1 x 120 mm Machine length: 2540 mm Predpfx Aeiqg N Nodyjc Machine width: 1195 mm Weight: 950 kg

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Psdpogyzzmjfx Adyerc Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Psdpjuzkwzsfx Adyjrc Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: as good as new (ex-display), Year of construction: 2024, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Predpfsuzkxxsx Adyoc Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg