Swivel spindle milling machine

SCM NOVA Ti 105 LL

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: Kdedpfx Abeu Nz Ndj Uew 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides Ksdpfx Aboh Ellzo Ujdw * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: excellent (used), Year of construction: 2004, Multiblade saw Raimann ProfiRip KR 310 M with HOLTEC ES 121SHKA cross-cut saw and HurricAN extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished in 2022) Multirip saw with 2 adjustable saw blades Technical details: - Track width: 340 mm - Total feed passage width: max. 950 mm (instead of 800 mm) - Cutting height with/without pressure plate: 115 mm / 130 mm - Workpiece length: minimum 450 mm - Maximum saw blade diameter: 380 mm - Minimum saw blade diameter: 250 mm - Saw blade bore: 80 mm - Saw spindle diameter: 65 mm - Saw spindle speed: 3,900 rpm - Main motor: 30 kW - Laser alignment lights: 3 units - Operating pressure: 6 bar - Stepless feed speed: 8 - 48 m/min Ksdpfjw S S A Tjx Ab Usdw - Feed motor: 1.5 kW - Voltage: 400V / 50Hz

Condition: used, Year of construction: 1961, operating hours: 7,027 h, power: 14 kW (19.03 HP), next inspection (TÜV): 01/2026, The tractor is in unrestored but good condition and is fully functional. This is a private sale. Type * Box-shaped central tube support Engine * Air-cooled, two-cylinder, four-stroke, in-line diesel engine with direct injection from MWM * MWM AKD 311Z, displacement 1400 cc, 19 hp, bore = 90 mm, stroke = 120 mm. Clutch: Single-disc dry clutch Transmission * Fendt, 6-speed range transmission (combined gear and dog clutch transmission) with 6 forward gears and 2 reverse gears on a single lever with a double H-shift. * Rear wheel drive Brakes * Foot-operated two-shoe brake acting on both rear wheels, designed as a steering brake. Handbrake as a duplex brake, acting on the transmission. Axles * Fendt rigid front axle with central tube, suspended. Axle load front = 900 kg, rear = 1290 kg Hydraulic system and power lift * Independent hydraulic pump, driven directly by the engine. Bosch hydraulic pump 11.0 liters/min, 110 bar. Dimensions and dimensions * Length = 3163-3420 * Width = 1517-1520 * Height = 1580. Ground clearance = 360 mm. * Permissible weight Total weight = 2190 kg Tires * Front tires 5.50-16 * Rear tires 8-28 Capacities Kedpfjwggplsx Ab Ujdw * Fuel tank 20 liters * Hydraulic tank 5.5 liters, with tipper 11.0 liters * Transmission oil 13 liters * Engine oil approx. 4 liters

Condition: reconditioned (used), Year of construction: 1995, Motor power: 8.6 kW Voltage: 400 V 50 Hz Kdodpfjv Npqrex Ab Usw Spindle: 30 + 40 mm Sliding table: yes Circular milling: yes Brake and emergency stop Speeds: 3000, 4000, 6000, 8000, 5000, 10000 rpm

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m Kodpshwwpljfx Ab Usdw ✔ Weight: 4200 kg 2 years warranty or 2000 working hours

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Kdodpfxevkuqmj Ab Uew Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Kdedpfx Abeipvrbe Uew Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Kdjdjdqzcxjpfx Ab Ujw Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Kdsdpsdqzh Rsfx Ab Ujw Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm