Used Heating Installation for sale (21,060)

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Bedpsycl Abjfx Aftjwi Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: like new (used), functionality: fully functional, power: 250 kW (339.91 HP), fuel type: diesel, operating hours: 615 h, Complete firepack installation supplied by Van Wijk & Boersma Firpacks (NLD). The entire system comprises two diesel firepacks, each configured to deliver 700 m3/h at 8 bar in accordance with NFPA-20 regulations. An electrical control panel, type WB 882-D20, is installed in compliance with NFPA standards and includes a pressure switch. Each unit features a double-walled fuel tank with a capacity of 600 liters. • Engine brand: Scania Bsdpfx Asxdlmhjftjwi • Engine type: DI-9-48A 10-14 • Pump brand: Aurora • Pump type: 8-481-17B • Year of manufacture: 2004 CHARACTERISTICS (per unit) • Pump capacity: max. 1050 m3/h • Pump pressure: max. 9.4 bar • Engine power: 250 kW • RPM: 2050 • Operating hours: 460 – 615 hours

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Bjdpfxjxfa Tlj Aftswi

Condition: used, Year of construction: 1995, operating hours: 20,000 h, functionality: fully functional, power: 410 kW (557.44 HP), smoke pipe connection diameter: 320 mm, For sale: Spänex heating system including discharge unit. The silo discharge is from Pöllhuber. The silo diameter is 8 m. The heating room height is 3 m. Available from mid-year by arrangement. Bodpfx Afeykky Iotowi

Condition: new, functionality: fully functional, Komfi Amiga 52 Laminator – High Automation and Industrial Precision For sale: Komfi Amiga 52, a professional thermal laminator designed for small and medium print shops with a strong focus on digital jobs and short/medium runs. This machine stands out for its high reliability, advanced automation, and excellent lamination quality, significantly reducing waste and minimizing operator intervention. Its compact and accessible design ensures maximum performance in limited spaces while maintaining ease of operation and maintenance. Ideal Applications • Book covers (hardcover and softcover) • Commercial and promotional print jobs • Lightweight packaging and folding cartons • Demanding digital work • Window laminating • Jobs with frequent changeovers Key Features • Intelligent control system with sensors for continuous monitoring • Automatic machine and material protection functions (overlap detection, sheet separation, jam prevention) • High registration accuracy and secure stop without damaging sheets • Reliable feeding at maximum speed • Modular configuration with multiple options and accessories • Easy operation with automated start-up sequences • Job memory and connectivity for remote diagnostics • Prepared for challenging substrates or problem digital prints Technical Specifications • Max. speed: 25 m/min • Max. sheet size: 560 × 800 mm (optionally up to 1016 mm) • Min. sheet size: 200 × 200 mm • Paper weight: 115 – 600 g/m² • Max. pile height: 52 cm • Heating: Single-zone IR • Warm-up time: 3–5 min • Overlap accuracy: ± 0.8 mm • Dimensions (with delivery): 2.63 × 1.00 m Standard Configuration • Single-action Komfi feeder • Air compressor and vacuum for stable feeding • Rubber-covered pressure roller Bjdpfxeyi Sd So Aftswi • Pneumatic uniform pressure system • Adjustable reel shaft with brake • Extended anti-wrinkle roller • Automatic decurling unit • Integrated film perforator • Delivery table with air jets Available Options (Depending on Configuration) • Intelligent bottom feeder (manual or online with digital press) • Sheet preheater • Hot knife for perfect separation • Automatic jogger/table stacker • Ionizer/anti-static bar • Film slitter • Additional perforator • Foiling/effects device • Autopilot for automatic supply control Key Production Advantages ✔ High automation = reduced operator requirements ✔ Low waste and fast set-up ✔ Compatible with short runs and frequent job changes ✔ Consistent, professional quality ✔ Robust Komfi construction

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Bwedpjud R Iisfx Aftei Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 2928, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering this used MAWERA FU 1300 RA heating system, year of manufacture 1986, for sale. Includes control cabinet, flue gas cleaning system, and induced draught fan. Type: FU 1300 RA Year of manufacture: 1986 Nominal heat output: 1500 kW Permitted operating overpressure: 6 bar Additionally, a moving floor discharge system with twin auger and hydraulic unit is available for sale. For dimensions, please refer to the images. Price applies only to the boiler; moving floor discharge system sold separately. The system is still operational and can be inspected at any time. Scheduled dismantling date: mid-May 2026. Dismantling by the seller is possible; dismantling costs will be charged separately. If you have any questions or need further information, please feel free to send us a message or call us. Bwedpfx Aeykmd Aoftoi

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips Bjdpfxjyizqno Aftswi With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application Bedpfoyc Ig Ajx Aftewi • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Bwjdpfxjyfnulj Aftei Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Bwedpfx Afst R Tr Sotoi

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Bwjdjrp E Nkepfx Aftsi

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Bwedpfx Ajxc Ni Rsftsi

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Bwedpetwqzrefx Aftei

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Bjdpfotphubjx Aftewi

Year of construction: 2012, condition: ready for operation (used), Four heat exchangers from various manufacturers are available. 1) Shell and tube heat exchanger K. Ley Maschinen- und Apparatebau, year of manufacture: 1999, material: stainless steel/cast iron, heat transfer surface: 30m²-40m², operating pressure inside/outside: 25bar/45bar, max. operating temperature: 250°C, internal/external volume: 290l/200l, machine dimensions X/Y: approx. 6400mm/400mm, weight: approx. 1800kg. 2) Shell and tube heat exchanger Wisstaler Hüttental, year of manufacture: 1979, heat transfer surface: 80m²-120m², max. operating temperature: 150°C, internal/external volume: 579l/1387l, machine dimensions X/Y: 2500mm/800mm, weight: approx. 2800kg. 3) Shell and tube heat exchanger Vehterus PSHE 3LL-270/5/5, year of manufacture: 2012, heat transfer surface: 19.9m², capacity: 245kW, operating pressure: 16bar, test pressure: 33bar, max. operating temperature: 110°C, internal/external volume: 21.4l/33.2l, machine dimensions X/Y: approx. 850mm/400mm, weight: approx. 300kg. 4) Plate heat exchanger GEA BT30-5C-10V-80, year of manufacture: 2010, heat transfer surface: 5m²-10m², max. operating temperature: 200°C, machine dimensions X/Y/Z: approx. 500mm/350mm/750mm, weight: approx. 520kg. Documentation available. An on-site inspection is possible. A package sale is preferred. Bjdpfx Aexn S S Seftswi

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Bjdpfsx Syv Njx Aftjwi

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Bodpfx Afeg Uwx Rjtowi

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Bedpogg Stfefx Aftswi

Condition: new, Year of construction: 2024, functionality: fully functional, fuel: electricity, input frequency: 50 Hz, Equipment: type plate available, ZIEHL ABEGG AXIAL FAN MAXvent owlet REF: DN12V-6DF.K9.14.P6 Casing: The fan casing is made of hot-dip galvanized steel, long version with a connection according to EUROVENT standards. The fan's operating temperature range is -20 to 50°C. Casing diameter: 1350 mm Impeller: The impeller is made of the new ZAmid composite material – it is extremely lightweight yet as hard as steel. The impeller is dynamically balanced and fitted with 6 blades at a 14° pitch. Bwedpfx Ajxvz Uxoftsi Impeller diameter: 1250 mm Number of poles: 6 SIEMENS three-phase motor: 400V 50Hz 9.57 kW 19.70A 980 rpm BRAND NEW EQUIPMENT, NEVER INSTALLED

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Bedpfx Asx Uqc Eoftjwi

Condition: new, Automatic Wood Chip and Wood Shavings Fired Boiler System Technical Data: Type: T4 – 150 Output: 150 kW Width: 790 mm Height: 1840 mm Length: 1770 mm Bodsykqwmopfx Aftewi Weight: 1500 kg Water capacity: 340 l Maximum permissible operating temperature: 90°C Maximum permissible operating pressure: 3 bar Electrical connection / Power supply: 400 V / 50 Hz / C16A

Year of construction: 2022, condition: new, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of heating oil. Nominal capacity 50 cbm new color equipment paint RAL ; 7035 Material steel in steel, material S235JRG2 Bwodpfx Afjh Ukuljtsi Documentation Manufacturer's certificate/ dipstick plate piece 1 dipstick Piece 1 air vent Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight piece 1 ladder Piece 1 suction line tank dimensions approx . 10900 mm diameter approx. 2.500 mm Weight approx. 9.000 kg Storage above ground Delivery time = September With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2002, condition: used, Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of fuel oil and diesel . Nominal capacity 50 cbm piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; however, you can also bring in your own color wishes at any time. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece1 venting spigot Piece1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank dimensions length approx . 8.220 mm diameter approx. 2.900 mm Weight approx. 8.000 kg Storage above ground Of course you can also design your tank system! All our installations are checked and inspected in our company by selected employees. extensively controlled and checked. We offer an inexpensive delivery on request additionally. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are in all sizes and are available for sale on our premises. All our tanks can be offered without diesel pump. Top in the offer . Liquid fuel - AHL tanks in the size of 10.000-100.000 liters. Water tank Loeschwassertank in the offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately Bjdpfxoc Nkx Us Aftowi You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1999, condition: used, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 10 cbm Piece 1 Bedpfjc Nkw Iex Aftowi used but reconditioned, i.e. the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; . However, you can always bring your own color wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate All our tank units can also be offered without diesel pump . Top on offer . Liquid fertilizer - AHL tank plants in the size of 10,000-100,000 liters. Of course you can also design your tank plant! All our installations are extensively checked and inspected in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank facilities for above ground as well as underground storage are available in all sizes and are for sale on our premises. Price/ Shipping The price for the filling station is valid from the location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank Environmental Protection Wozniack