Used Heavy Lathe for sale (10,045)

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 Fjdezi Dhbopfx Al Ujpn - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 1974, turning diameter over bed 1320 mm turning diameter over slide rest 820 mm turning length 4400 mm faceplate 1200 mm bed width 800 mm spindle passage 167 mm steady 480 control IMS total power requirement 76 kW Maschinen Nr.: 3987 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fedpfx Aleyqu Szj Uspn About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg Fjdpfx Alswtrz Hj Uopn work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm Fjdpfx Aljzxlwce Uspn 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Fjdpfx Asyy Nx Nel Uspn Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, turning diameter over bed 3800 mm turning diameter over slide rest 3200 mm turning length 12000 mm faceplate diameter 3100 mm steady 2 bed width 4000 mm turning speeds 200 U/min workpiece weight 90.000 kg Hydrostatik Spindellagerung Hydrostatik Lynette The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fpjdpfeyqwa Uex Al Uon About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE Fpodpfx Aozi Duhol Usn A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 1988, Height of centers: 2, 050mm Max. turning diameter: 4, 000 mm Turning Lenght: 10, 000mm Max. load between centers 25 tons Max. load between centers with 2 steadies 40 tons Headstock travel 1 000 mm Fjdpsdah E Ajfx Al Uepn Main motor power 75 kW Spindle speed (3 ranges) 0, 5 - 100 RPM Spindel hole: 105 mm Tailstock diameter: 280 mm incl. faceplate 2, 000 mm incl. grinding attachment incl. 3 pcs steady rests (100-400, 250-600, 400-800) incl. 1 pc. open steady rest (400-1300) Total weight of the lathe: 110 tons Condition: very good

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: TCG 160 x 5M, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 1,600 mm, disc diameter: 1,600 mm, LATHE AVAILABLE FROM STOCK Fodpfxovw Uu So Al Ujpn The heavy double-guide lathe TCG is a universal machine tool that allows roughing and finishing turning, drilling, threading, turning cones, boring, heavy and very heavy objects with one clamping. The TCG lathe is a lathe for machining objects with diameters of 1600 mm. The construction system and rigidity of the structure allow turning with large chip cross-sections and ensure high smoothness with minimal ovalization of the workpiece. The machine is located in our company ZAK in Poręba ul. Zakładowa 2 (Poland) We encourage you to submit inquiries.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Fpodpfx Alozxrkij Uon Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Fpsdpfx Alozfguij Ujn Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Fpsdez Ebbzopfx Al Usn Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Fpedpszrmigjfx Al Uen Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. Fpsdpfxjxdmgvj Al Uen The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW Fpsdpfjwfpiljx Al Uon -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: ready for operation (used), turning diameter over cross slide: 530 mm, turning diameter: 800 mm, overall weight: 10,000 kg, Poreba Heavy Duty Gap Bed Lathe Model: TPK 80 Distance Between Centres: 5000mm Swing Over Bed: 800mm Swing Over Topslide: 530mm Swing In Gap: 1080 x 200mm Spindle Speeds: 8-1500 RPM Spindle Bore: 95mm Motor: 23 KW Machine With: Fedpsz Dh U Sjfx Al Uopn 800mm 4 Jaw Chuck 400mm Roller Steady 300mm Pad Steady

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Fpedpfxoz Hmc Ts Al Uon Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 3,000 mm, spindle speed (max.): 1,120 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 315 mm Turning diameter over bed: 630 mm Turning diameter over slide: 400 mm Distance between centers: 3,000 mm Bed width: 580 mm Spindle bore: 82 mm Spindle speed: 9–1,120 rpm Fjdpfx Ajz Ebcrol Uepn MACHINE DETAILS Control system: Conventional Power: 18.5 kW DIMENSIONS & WEIGHT Dimensions (L x W x H): 4,500 x 1,600 x 1,500 mm Net weight: 5,000 kg Shipping packages: 1 unit

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF Fpsdpfx Ajz Nv H Ujl Uen - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: ready for operation (used), functionality: fully functional, center height: 700 mm, center width: 800 mm, spindle speed (max.): 240 rpm, No minimum price - guaranteed sale to the highest bidder! Fpsdpfx Aloz Ebc Ss Ujn TECHNICAL DETAILS Maximum turning height: 700 mm Turning diameter over bed: 1,400 mm Turning diameter over slide: 640 mm Distance between centers: 800 mm Bed width: 700 mm Spindle bore: 80 mm Spindle speed: 110 - 240 rpm MACHINE DETAILS Control system: Conventional Power: 11.5 kW Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,500 x 2,500 mm Net weight: 10,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Fodpfsz Hmhijx Al Uspn Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: used, fixed heavy-duty lathe carriage center height 1040 mm Fpedpfx Alodbbuij Uon internal diameter 480 mm weight 700 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Fpsdpfxjz Nwape Al Ujn Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 25693, turning diameter: 150 mm, Specifications: Number of Axes: 3 Maximum Workpiece Diameter: 300 mm (approx.) Maximum Workpiece Length: 300 mm (approx.) Chuck Size: 6” (standard, options for larger sizes) Machine Dimensions: 2,400 mm x 2,200 mm x 2,500 mm (approx.) Machine Weight: 3,200 kg (approx.) Spindle Speed: Up to 6,000 RPM (standard) Spindle Power: 15 kW (continuous) Spindle Torque: 75 Nm Spindle Bore: 65 mm X-Axis Travel: 300 mm Y-Axis Travel: 250 mm Z-Axis Travel: 300 mm Rapid Traverse (X, Y, Z): 20 m/min (maximum) Feed Rate: 12 m/min (max feed rate in all axes) Number of Tool Stations: 6 to 12 tool stations Maximum Tool Diameter: 32 mm (in fully populated tool turret) Maximum Tool Length: 100 mm Fjdozn Ay Tspfx Al Ujpn Positioning Accuracy (X, Y, Z): ±0.005 mm Repeatability (X, Y, Z): ±0.002 mm Spindle Runout: < 0.003 mm

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 Fjdpfx Asw E Nkiol Uopn -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg