Used Hedges Professional for sale (5,095)

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 52179, - Type: TB-21.65/J35 - Width: 600 mm Blodpfx Absvvavlo Usf - Weight: 550 kg - Volume: 0.43 m³ - Mount: CW30/40

Condition: used, table length 1500 mm table width 1500 mm Bsdpjyy A Hmsfx Ab Ujlf table height 200 mm weight of the machine ca. 750 kg

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is delivered powder-coated in RAL 7012 and RAL 7035. Use of special colours is possible but must be agreed in advance and may incur additional charges. Welded table frame designed for professional use, mounted on a swiveling trolley, stands on 4 swivel castors, surface load capacity 150 kg. When not in use, the machine can be swiveled and locked into a space-saving position, reducing its depth to just 800 mm. The table surface consists of a 22 mm thick HPL/MDF board, covered in the pressing area with a slotted vacuum distributor plate made of MDF. Membrane frame opening is assisted by 2 gas struts mounted on the sides of the machine. The installed membrane is made of natural rubber, 2 mm thick, 780% elongation at break, and heat resistance up to 70°C. The membrane is fixed using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is ensured by a sealing profile in the membrane frame. Oil-lubricated vacuum pump with 40 m³/h suction capacity and two vacuum tanks with a total capacity of 200 liters. Press chamber evacuation and ventilation is controlled via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. You can also book initial setup and a brief instruction session by one of our technicians. If required, we will be happy to provide you with a separate quote for this service. Summary of key specifications: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation at break: 780%, excellent recovery properties, suitable for temperatures up to 70°C - Vacuum distributor plate made of MDF Bodpjywpt Isfx Ab Uslf - Digital vacuum control VAK-CONTROL 1 with automatic shut-off - Vacuum pump: 40 m³/h, oil-lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with brakes - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Setup dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Setup dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: April/May 2026 Location: Flörsheim

Condition: like new (used), Hobart UXT -10A, year of manufacture 2020, professional dishwasher Bsdpfjyy I Rdsx Ab Uslf

Condition: used, Just Normlicht Color-Control Professional ist ein Farbprüftisch für ein präzises Farbmanagement-System. Just Normlicht Color-Control Professional is a color testing table for a precise color management system. Bedpoyuzf Aefx Ab Uslf Farbprüftisch / Ink Proof Table Just Normlicht Color-Control Professional  Tischabmessungen / Table Sizes 940 x 680mm 5 Schubladen L/B/H 90 x 70 x 12cm / 5 drawers W/L/H 90 x 70 x 12cm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, power: 1.5 kW (2.04 HP), color: yellow, overall weight: 30 kg, Year of construction: 2020, machine/vehicle number: 2012241648399, Professional condenser dryer for storage rooms, construction sites... Bljdpeyybiajfx Ab Uef

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine by Franz Pytlik Maschinen, Nürnberg. Featuring a robust cast iron construction, this machine is designed for precise cutting of large formats in bookbinderies and printing shops. The guillotine offers an impressive cutting width of 112 cm, allowing processing of oversize sheets. The working table has a depth of 72 cm. The blade mechanism operates smoothly and easily, and the rear gauge is adjusted with a handwheel for accurate positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Model: Manual bookbinding guillotine Bodpfxexzu Ucj Ab Uslf – Cutting width: 1120 mm – Table depth: 720 mm – Solid cast iron frame – Cutting lever with wooden handle – Rear gauge adjustable via handwheel – Large, stable work surface – Lower shelf for sheets and tools – Blade in good condition (sharpenable) Technical condition: Machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in binderies, printing shops, technical studios, or model-making workshops.

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: Blsdpfxexabfrj Ab Usf - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, total length: 5,700 mm, total height: 2,313 mm, input current: 400 A, type of input current: three-phase, working length: 3,200 mm, Equipment: CE marking, We are offering for sale a very well-maintained Schröder PowerBend Professional 3200/3.0. The machine is in excellent condition and is immediately ready for use. • Year of manufacture: 2016 • Working length: 3,200 mm • Usable length: 3,240 mm • Machine depth (with rear stop 1,600 mm): approx. 3,223 mm • Bending beam adjustment: up to 150 mm • Bending center adjustment: approx. ±20 mm • Machine height (with gantry): approx. 2,313 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA • Pneumatics: 6 bar • Weight: 6,700 kg Blodpfxeytnvre Ab Usf • Stroke: approx. 500–540 mm • Number of bends so far: approx. 310,000 • Location: 49170 Hagen a.T.W. The control system was recently renewed and is up to date. The machine is fully operational and can be inspected by appointment. Other information: Sale as seen Inspection and collection in Hagen a.T.W. by arrangement Location: Hagen a.T.W. Sale by company → without warranty or guarantee, subject to prior sale and errors.

Condition: excellent (used), We are selling a professional screw compressor with direct drive. This model is most commonly used in the following sectors: Blodpfxeyudvds Ab Uef Industrial and craft production: Ideal for (CNC) machining centers in engineering and woodworking industries. Automotive workshops and paint shops: Suitable for larger operations requiring a stable air supply for pneumatic tools and painting applications. Sandblasting and shot blasting: With a capacity of up to 900 l/min, it is suitable for virtually continuous blasting in workshops. Packaging lines and waterworks: Used as a stable compressed air source for automated processes. Pneumatic tools: Powers a wide range of professional tools in small to medium-sized businesses.

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press Bljdpox A Ivvsfx Ab Uef • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: new, Year of construction: 2025, For sale is a Felder K500 P panel saw with an 800 mm cutting width. This is a brand-new machine (originally packaged) with full warranty/guarantee. Technical data: - 2050 mm X-Roll sliding table - 1300 mm outrigger table with 2600 mm crosscut fence - Angle index system - 800 mm cutting width across the entire table width - Rip fence with fine adjustment - Extraction pipe holder for saw blade guard - Additional crosscut stop 1300 mm - 5.5 HP (4 kW) motor, 400 Volt - Machine No. 441.11.031.25 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618 Blodoyk T H Djpfx Ab Uef

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Bjdpfovn Uz Tjx Ab Uslf Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools

Condition: used, Die Palettenwaage von SOEHNE Professional S20-2761 kann von 4kg bis 1500kg wiegen. Bjdpfx Asxbn Aajb Ujlf The SOEHNE Professional S20-2761 pallet scale can weigh from 4kg to 1500kg. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 10 h, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift pallet truck Mast type: None Technical condition: very good Front tyres type: Solid rubber (bandages) Front tyres size: 210x70 Bodjymt Dzepfx Ab Uslf Rear tyres type: Solid rubber (bandages) Rear tyres size: 78x60 Battery voltage: 12V Battery capacity: 85Ah Description: new UVV inspection & maintenance, new batteries

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Blsdpfx Ajyapwkjb Uef If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Bodeyankiopfx Ab Uelf Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: freezer, lighting, ISA PROFESSIONAL ice cream display case ice counter ice cream parlor ice cream refrigerated display case 18 types of ice Different advertising in front - the model remains the same Ice cream display case with air-cooled indoor unit for the presentation of 18 ice cream bowls 5 liters. Weight: 450kg Width / length ~ 167,3 cm Blodpfxsv Iy Rtj Ab Uef Depth ~ 106,9 cm Height ~ 130,8 cm Plastic / metal bracket accessories Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. Used machine - very good condition - checked and fully functional. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Blsdpexk T Igefx Ab Usf

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode Blodpfx Abeyk Elre Uef (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: good (used), Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The display unit SOEHNLE 2790 is very handy and also protected to IP65 protection, making it easy to use even in wet areas With just five buttons, the SOEHNLE 2790 digital display is easy to use. The built-in functions are on / off, taring, clear tare, zeroing and printing. In addition, the 2790 display also has a piece counting function. The display unit SOEHNLE 2790 can not only be operated battery-powered with the included 230 V power supply, but also up to 100 hours off-line. The 20 mm high digital display is backlit during mains operation and thus very easy to read. For battery or battery operation, an automatic shutdown to protect the batteries and batteries can also be set. Soehnle Professional 2790 weighing    Technical specifications ᐳ Anodized aluminum housing with polyamide injection molded parts ᐳ Dimensions: L 306 x W 77 x H 82.6 mm ᐳ Connection of a balance with strain gauge load cells ᐳ Load cell supply voltage: 4 V, approx. 67 Hz rectangle ᐳ Measuring voltage: 0.2 -12 mV ᐳ Smallest input signal per calibration value: 0.4 μV ᐳ Load cell impedance range: 87-1,200 ᐳ Load cell connection: 4- or 6-wire ᐳ Temperature range: -10 to + 40 ° C ᐳ Weighing ranges: 0.1-100,000 kg ᐳ Mains operation via mains adapter Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA ᐳ Battery operation for approx. 160 hours with 4 Mignon batteries 1.5 V Bjdpfx Abod Sfb Ie Uolf ᐳ Auto-off function (time adjustable) Floor scale Soehnle 9013 Weighing platform 150x125 cm up to 1500 kg Use of the floor scale in the temperature range from -10 ° C to +40 ° C Floor scale is ready for use immediately after setting up Maintenance-free weighing technology from SOEHNLE More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description Bodjxabc Dopfx Ab Uslf - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm Bledpexaacpofx Ab Uof - Plasma nitrided 750 version with scale - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm Bjdjxaayzjpfx Ab Uslf table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid Bjdexabiwjpfx Ab Uelf - incl. 6x base equipment