Used Hedges Professional for sale (5,336)

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Giedpjvn Uz Tsfx Abrjn Complete coolant system feed protection machine tools

Condition: good (used), Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The display unit SOEHNLE 2790 is very handy and also protected to IP65 protection, making it easy to use even in wet areas With just five buttons, the SOEHNLE 2790 digital display is easy to use. The built-in functions are on / off, taring, clear tare, zeroing and printing. In addition, the 2790 display also has a piece counting function. Giodpfx Asd Sfb Isbren The display unit SOEHNLE 2790 can not only be operated battery-powered with the included 230 V power supply, but also up to 100 hours off-line. The 20 mm high digital display is backlit during mains operation and thus very easy to read. For battery or battery operation, an automatic shutdown to protect the batteries and batteries can also be set. Soehnle Professional 2790 weighing    Technical specifications ᐳ Anodized aluminum housing with polyamide injection molded parts ᐳ Dimensions: L 306 x W 77 x H 82.6 mm ᐳ Connection of a balance with strain gauge load cells ᐳ Load cell supply voltage: 4 V, approx. 67 Hz rectangle ᐳ Measuring voltage: 0.2 -12 mV ᐳ Smallest input signal per calibration value: 0.4 μV ᐳ Load cell impedance range: 87-1,200 ᐳ Load cell connection: 4- or 6-wire ᐳ Temperature range: -10 to + 40 ° C ᐳ Weighing ranges: 0.1-100,000 kg ᐳ Mains operation via mains adapter Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA ᐳ Battery operation for approx. 160 hours with 4 Mignon batteries 1.5 V ᐳ Auto-off function (time adjustable) Floor scale Soehnle 9013 Weighing platform 150x125 cm up to 1500 kg Use of the floor scale in the temperature range from -10 ° C to +40 ° C Floor scale is ready for use immediately after setting up Maintenance-free weighing technology from SOEHNLE More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2024, Straw harrow with disc coulter, adjustable Lighting system Weight 2,150 kg / Giodpfxotya Ims Abren

Condition: new, Year of construction: 2025, Professional Portable Bandsaw – Precision, Durability, and Reliability We offer a portable bandsaw designed specifically for professionals, craftsmen, and woodworking companies. The machine combines solid construction, cutting precision, durability, and ease of use – ensuring comfort and reliability even under intensive operation. Main Features: Steel and bearing guides – Two guiding grooves in the steel rails allow them to be rotated when worn, extending their service life. The bearing guides are equipped with high-quality 696 2RS bearings, readily available locally. Blade length 1710 mm – Standard blades are also available from local suppliers. The rubber coatings on the drive wheels can be easily replaced by the user. Brushless motor – reliable, practically maintenance-free, and does not require spare parts. Replacement capacitors are widely available around the world. Godpfev Tcuxox Abroin Robust aluminum construction – ensures stability, straight cutting, and durability even during intensive use. Benefits for professionals: Designed for professional use – guarantees reliability, precision, and ease of operation. Minimal operating costs thanks to easily accessible spare parts and a maintenance-free motor. All wear parts are easy to replace, reducing downtime and maintenance costs. Additional Information: Due to high demand, shipping is carried out within four working days after payment confirmation. This machine is ideal for professionals looking for precise, durable, and reliable equipment that ensures comfort and long service life. TECHNICAL DATA: Cutting height: 300 mm Guide wheel diameter: 203 mm Saw blade length: 1710 mm Blade width: 6–13 mm Guide table: 420 × 310 mm Asynchronous motor Protection class: IP54, single-phase current Motor power: 0.75 kW, 1410 RPM

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled Gjdpfowc Ri Iex Abrjin SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. Gisdpfx Abewf Dwwsron ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Giodpfx Abewc Rk Esron Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Gedpfx Aowc Afhjbroin SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Gjdpfewi Uftsx Abrein Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: new, power 4,0 (5,45) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 880 mm width 735 mm height 1 540 mm weight 70 kg material varnished steel discharge height 450 mm Giodpjb Nvn Tjfx Abrjn suitable for branch diameter up to 50 mm

Year of construction: 2006, condition: good (used), Description Brand Fimar Model FME 4+4 ID 0069 Status Active Price 800 € + VAT Location Oradea (RO) Professional electric pizza, bread oven - rustic frontal lining - refractory cooking surface - heat insulation by rock wool lining - doors with Pirex inspection glass - pyrometers - interior lighting - 2 thermostats per chamber. POWER: 8,4 kW POWER SUPPLY: 230V/1N/50-60Hz - 230-400V/3-3N/50-60Hz CURRENT: 40A - 15A (230V/1N) (400V/3N) WORKING TEMPERATURE: 50 ÷ 500 °C COOKING CHAMBER DIMENSIONS: 610x610x140h (mm) x2 DIMENSIONS: 900x735x750h (mm) NET WEIGHT: 114 Kg GROSS WEIGHT: 139 Kg ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Gsdpfx Ajd Hzayobroin Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available Gedpfx Abjh Rfcnjrjin The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: used, Year of construction: 2025, operating hours: 53 h, SUNWARD SWE20F Year of manufacture: 2025 Approx. 53 operating hours (may increase due to demonstrations) Operating weight: 1.94 t Giedpfx Aoxmua Aebron Engine: Yanmar 3-cylinder diesel engine 3TNE88 (Japan) Power: 13.4 kW / 2200 rpm Telescopic undercarriage, width adjustable from 99 to 132 cm Foldable dozer blade 2 travel speeds Articulated boom (allows work directly at walls and hedges) Long dipper stick, digging depth 238 cm Load holding valve Pump: Kayaba (Japan) 2 proportional joysticks LED work lights Radio with SD/USB 2x auxiliary hydraulic circuits (for grab/hammer/shear) 1x quick coupler hydraulic lines Genuine counterweight – unlike replica models, which only have sheet metal covers in the rear that cause instability 4 years remaining warranty according to manufacturer’s guidelines Includes MS01 30 cm and 50 cm digging buckets 1 m fixed ditch cleaning bucket Optional: 1 m hydraulic ditch cleaning bucket for an extra €500 net. All information subject to change/errors. Take advantage of this unique opportunity to acquire a true professional machine at an unbeatable price. Sunward is among the top 20 excavator manufacturers worldwide. Viewing possible at any time by appointment (please call to arrange). We accept trade-ins of your used machine. We are the official Sunward dealer for the following regions: Wittenberg district, Nordsachsen district, Leipzig district, Leipzig city, Elbe-Elster district, Oberspreewald-Lausitz district, Cottbus city, Spree-Neiße district, Oberhavel district, Barnim district, Märkisch-Oderland district, Frankfurt Oder city, Oder-Spree district, Dahme-Spreewald district, Teltow-Fläming district, Potsdam-Mittelmark district, Potsdam city, Brandenburg city, Havelland district, Berlin city.

Condition: new, Year of construction: 2025, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and see for yourself the extensive selection and outstanding quality we offer. We always have around 20 excavators in stock. Mini Excavator Sunward SWE25UF – Short Tail Year of manufacture: 2025 Operating weight: 2,650 kg Kubota 3-cylinder diesel engine D1105 Power: 15.4 kW at 2,400 rpm Cab with suspension seat and heating, Radio USB Width: 1.50 m 2 travel speeds with auto-shift Offset boom (work directly alongside walls and hedges) Long dipper arm Max. digging depth: 280 cm LED work lights, Aux 1 proportional control on joystick Aux 2 proportional control on joystick 2x auxiliary hydraulic lines (for grab/hammer/shear) 5-year warranty. Optional: MS03 quick coupler Accessories, such as buckets, hydraulic breakers, grapples Powertilt, on request Matching trailers also in stock. All information subject to change and without guarantee. Take advantage of this unique opportunity to acquire a truly professional machine at an unbeatable price. Sunward is among the world’s top 20 excavator manufacturers. Inspection possible anytime by prior telephone arrangement. Gijdpsxccgpjfx Abren We accept trade-ins of your used machine. For quotation requests, please provide your full address and email address! We are the Sunward dealer responsible for the following areas: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt Oder, District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin.

Condition: new, We are the official Sunward dealer for Berlin, the federal state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our extensive selection and high quality. We always have around 20 excavators in stock. Mini Excavator Sunward SWE17F Year of manufacture: 2025 Operating weight: 1.78 t Engine: Yanmar 3-cylinder diesel engine 3TNV80-SSU Power: 13.4 kW/2200 rpm Telescopic undercarriage: 99 cm - 1.36 m wide Folding dozer blade 2 driving speeds with auto shift Swing boom (allows working directly alongside walls and hedges) Long dipper arm Giodpfx Asxccgvebren LED headlights Radio with SD/USB AUX 1 proportional on joystick 5-year warranty Optional: MS01 quick coupler Attachments such as buckets, hydraulic hammers, grapples, etc. Powertilt Matching trailers also in stock. All information provided without guarantee. Take advantage of this unique opportunity to acquire a true professional machine at an unbeatable price. Sunward is among the 20 largest excavator manufacturers worldwide. Viewing is possible at any time by prior telephone appointment. We accept trade-ins for your used machine. For quotation requests, please provide your full address and e-mail address. We are the Sunward dealer responsible for the following areas: District of Wittenberg, District of North Saxony, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt (Oder), District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, and the city of Berlin.

Condition: new, ATTENTION: There are machines being offered as Sunward units which are not genuine. These are replicas under different brand names, marketed as Sunward successors or new models. Please verify that the dealer is officially listed and that the machine for sale features an official Sunward type plate; otherwise, these are copies and have no affiliation with Sunward. We are the official Sunward dealer for Berlin, the state of Brandenburg, and eastern Saxony. Visit us and be impressed by the wide selection and quality. We regularly stock around 20 excavators. SUNWARD SWE20F Year of manufacture: 2025 Operating weight: 1.94 t Engine: Yanmar 3-cylinder diesel engine 3TNE88 Japan Output: 13.4 kW / 2200 rpm Telescopic undercarriage: 99-132 cm wide Foldable dozer blade 2 travel speeds Swing boom (enables working directly against walls and hedges) Long dipper arm, digging depth 238 cm Load-holding valve Pump: Kayaba Japan 2x proportional joysticks LED work lights Radio with SD/USB 2x additional hydraulic circuits (for grab/hammer/shears) 1x quick coupler hydraulic line Equipped with a real counterweight; replicas only have a sheet metal rear cover, causing instability. 5-year warranty. Optional equipment: MS01 mechanical quick coupler 30 cm bucket Gsdpfxexccg Nj Abrein 50 cm bucket 1 m ditch cleaning bucket, fixed 1 m ditch cleaning bucket, hydraulic MS01 hydraulic quick coupler Powertilt and other attachments available on request. Matching trailers also in stock. All information is subject to change. Take advantage of this unique opportunity to acquire a top professional machine at an unbeatable price. Sunward ranks among the top 20 excavator manufacturers worldwide. Viewing possible at any time by prior telephone arrangement. Trade-in of your old machine possible. For inquiries, please provide your complete address and email! We are the Sunward dealer responsible for the following areas: Districts: Wittenberg, Nordsachsen, Leipzig (district and city), Elbe-Elster, Oberspreewald-Lausitz, Cottbus (city), Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, Frankfurt Oder (city), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, Potsdam (city), Brandenburg (city), Havelland, Berlin (city).

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Gjdpfx Aboyf Hfporoin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €154,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only. Godpfx Abjxdn Nrjrsin

Condition: used, axle configuration: 3 axles, first registration: 03/2014, loading space length: 13,350 mm, loading space width: 2,510 mm, loading space height: 2,690 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: other, Year of construction: 2014, Equipment: ABS, = Further Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 33,278 kg, Unladen weight: 8,722 kg, Gross weight: 42,000 kg, Type of chassis: Incomplete chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2014, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: SLXe Spectrum, Refrigeration unit: Diesel/electric, Total hours / electric: 2405, Total hours / diesel: 21369, Body insulation, Wall thickness: 45 mm, Cooling type: Refrigerate, Day/night cooling: Day/night cooling, Additional evaporator, Axle type: SCHMITZ = Further Information = General Information Cab: Day cab Registration number: ON-95-GF Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tyre tread: 7 mm; Right tyre tread: 6 mm Axle 2: Left tyre tread: 3 mm; Right tyre tread: 7 mm Axle 3: Left tyre tread: 2 mm; Right tyre tread: 3 mm Weights Unladen weight: 8,722 kg Payload: 33,278 kg Gross vehicle weight: 42,000 kg Functionality Refrigeration unit: diesel and electric (21,369 operating hours diesel; 2,405 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): inspected until 04/2026 Condition Overall condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price classes. Gjdjykig Hspfx Abrein Why buy at Kleyn Trucks? It’s simple! • Large and fast-changing inventory • Recognisable quality • Good pricing • Professional trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • Guaranteed "Recognisable Quality" • And more.... Please visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease quotation and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 407,472 km, power: 130 kW (176.75 HP), first registration: 06/2017, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 8,110 mm, total width: 2,550 mm, total height: 3,560 mm, loading space length: 6,060 mm, loading space width: 2,500 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Recording device (driver's log) - Fixed fifth wheel - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Kerb weight: 5,414 kg, Gross weight: 7,490 kg, Total fuel tank capacity: 150 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Cab type: Short cab, Cruise control, Recording device (driver's log), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keep assist, Engine power: 130 kW (174 HP), Fuel type: Diesel, Euro standard: 6, Transmission type: Manual, Gearbox make: Mercedes Benz, Number of gears: 6, Power steering, ABS, ASR, Starter battery, System type: ., Seat arrangement: 1+1, Seat upholstery: Fabric, Manual seat adjustment, Tail lift, Tail lift version: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Aluminium, Tail lift dimensions: 180x248, Box truck tail lift = Further Information = Transmission Transmission: MB, 6-speed, manual gearbox Axle configuration Tyre size: 215/75R17.5 Brakes: Disc brakes Axle 1: Steered; Left tyre tread: 6 mm; Right tyre tread: 8 mm; Suspension: leaf suspension Axle 2: Twin tyres; Left inner tyre tread: 3 mm; Left outer: 4 mm; Right inner: 3 mm; Right outer: 10 mm; Suspension: air suspension Weights Unladen weight: 5,414 kg Payload: 2,076 kg Gross vehicle weight: 7,490 kg Functional Tail lift: Dhollandia, rear flap, 1,500 kg Cargo floor height: 104 cm Maintenance Periodic Technical Inspection (APK): valid until 07/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. We offer all European brands, years, and price classes. Gisdpfx Aoykigmsbrsn Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Proper business conduct • Multi-lingual staff • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 497,679 km, power: 353 kW (479.95 HP), first registration: 10/2020, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,340 mm, total width: 2,550 mm, total height: 3,870 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Alloy wheels - PTO (power take-off) - Sleeper cab - Auxiliary brake system = Notes = Gsdpfx Aoykigaebrjin Number of axles: 2, configuration: 4x2, unladen weight: 7,389 kg, gross weight: 20,000 kg, total fuel tank capacity: 480 liters, fifth wheel height: 115 cm, fifth wheel: Fixed, number of differentials locks: 1, alloy wheels, suspension type: air suspension, cab type: sleeper cab, cruise control, tachograph (control device), digital tachograph, air conditioning, stationary air conditioning, stationary heating, electric windows, electric mirrors, radio/cassette, color: multicolor, heated mirrors, type of lighting: halogen lamps, lane departure warning system, climate control, seat heating, Bluetooth, engine power: 353 kW (473 HP), fuel: diesel, Euro 6, transmission type: AS-Tronic, transmission make: ZF, gears: 12, auxiliary brake system, retarder brand: Intarder, power steering, ABS, ASR, PTO, PTO type: 1, starter battery, central locking, seating configuration: 1+1, seat upholstery: fabric, seat adjustment: manual = Further Information = Transmission Transmission: ZF, 12-speed, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: disc brakes Axle 1: steering; left tire tread: 9 mm; right tire tread: 13 mm; suspension: leaf suspension Axle 2: twin-mounted; left inner tread: 5 mm; left outer tread: 11 mm; right inner tread: 8 mm; right outer tread: 11 mm; suspension: air suspension Weights Unladen weight: 7,389 kg Payload: 12,611 kg gross vehicle weight: 20,000 kg Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €551 per month (default, 60 months); please ask for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Competitive prices • Reliable business practices • Multilingual team • We understand our customers • Support with import and transport • (Export) license plates quickly arranged • Professional technical services • The safety of certified quality • And more… Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry on our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 505,834 km, power: 353 kW (479.95 HP), first registration: 08/2020, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,400 mm, total width: 2,550 mm, total height: 3,860 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, traction control, = Further Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Alloy wheels - PTO (Power Take-Off) - Sleeper cab - Additional braking system = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,389 kg, Gross weight: 20,000 kg, Total fuel tank capacity: 480 liters, Fifth wheel height: 115 cm, Fifth wheel: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: Multicolored, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Engine power: 353 kW (473 HP), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, PTO (Power Take-Off), PTO type: 1, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, Automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 11 mm; Tyre tread right: 1 mm; Suspension: Leaf suspension Axle 2: Twin tyres; Tyre tread left inner: 7 mm; Tyre tread left outer: 8 mm; Tyre tread right inner: 12 mm; Tyre tread right outer: 7 mm; Suspension: Air suspension Weights Unladen weight: 7,389 kg Payload: 12,611 kg Gross vehicle weight: 20,000 kg Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 2 Financial Information Leasing rate: €551 per month (default, 60 months); Please ask for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, manufacturing years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing selection • Recognizable quality • Competitive prices • Professional business conduct • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration numbers arranged quickly • Expert technical services • The security of recognizable quality • And more.... Visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Godeykif Nopfx Abrsin Quickly calculate your leasing rate and submit an inquiry on our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 471,456 km, power: 353 kW (479.95 HP), first registration: 10/2020, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,400 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (control unit) - Fixed fifth wheel - Alloy wheels - PTO (power take-off) - Sleeper cab - Auxiliary brake system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,389 kg, Gross weight: 20,000 kg, Total fuel tank capacity: 480 liters, Fifth wheel height: 115 cm, Fifth wheel: Fixed, Number of lock differentials: 1, Alloy wheels, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine power: 353 kW (473 HP), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Auxiliary brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off, PTO type: 1, Starter battery, Central locking, Seating configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12-speed, Automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tyre tread: 12 mm; Right tyre tread: 13 mm; Suspension: Leaf spring Axle 2: Twin tyres; Left inner tyre tread: 9 mm; Left outer tyre tread: 7 mm; Right inner tyre tread: 8 mm; Right outer tyre tread: 10 mm; Suspension: Air suspension Weights Unladen weight: 7,389 kg Payload: 12,611 kg Gross vehicle weight: 20,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: €551 per month (default, 60 months); Please inquire for further information and conditions Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealerships for used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range comprises all European makes, years of manufacture, and price categories. Why choose Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognisable quality • Competitive pricing • Professional trading practices • We speak many languages • We understand our customers • Assistance with import and transport Gsdsykif Aepfx Abrein • (Export) license plates arranged quickly • Expert technical services • The assurance of recognized quality • And more... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask us directly about our European warranty packages.

Condition: good (used), mileage: 654,542 km, power: 132 kW (179.47 HP), first registration: 03/2013, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 8,180 mm, total width: 2,550 mm, total height: 3,630 mm, loading space length: 6,090 mm, loading space width: 2,500 mm, loading space height: 2,410 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Tachograph (recording device) - Fixed - Short cab - Tail lift = Notes = Number of axles: 2, Configuration: 4x2, Total tank capacity: 100 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 132 kW (177 Hp), Fuel: Diesel, Euro: 5, Transmission type: Manual, Transmission brand: Mercedes Benz, Gears: 6, Clutch pedal, Power steering, ABS, ASR, Starter battery, System type: ., Central locking, Seating arrangement: 1+1, Seat fabric: Cloth, Seat adjustment: Manual, Tail lift, Tail lift version: Rear platform, Tail lift capacity: 1500 kg, Tail lift manufacturer: Bar Cargolift, Tail lift material: Aluminum, Tail lift dimensions: 180x250 = Further Information = Transmission Transmission: MB, 6-speed, manual gearbox Axle configuration Tyre size: 215/75R17.5 Brakes: disc brakes Axle 1: Steering; Left tyre tread: 4 mm; Right tyre tread: 7 mm; Suspension: leaf suspension Axle 2: Twin tyres; Left inner tyre tread: 7 mm; Left outer tyre tread: 7 mm; Right inner tyre tread: 7 mm; Right outer tyre tread: 7 mm; Suspension: air suspension Functional Tail lift: Bar Cargolift, rear platform, 1500 kg Loading platform height: 105 cm Condition Technical condition: good Optical condition: good Gjdpfx Aoykifvsbrein Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of “recognizable quality” • And more... Please visit our website for special offers and the complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 686,604 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,060 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Equipment = - Second diesel tank - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - High roof Godpfeykifcex Abrjin = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,963 kg, Gross weight: 19,000 kg, Total tank capacity: 860 liters, Second diesel tank, Fifth wheel height: 115 cm, Fifth wheel type: Fixed, Number of differential locks: 1, Cab type: High roof, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/Cassette, Color: Yellow, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning, Air conditioning, Bluetooth, Engine power: 338 kW (453 Hp), Fuel: Diesel, Emission standard: Euro 6, Transmission type: Automatic, Transmission model: Scania, Gears: 14, Power steering, ABS, ASR, Starter battery, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14-speed, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 8 mm; Right tire tread: 9 mm; Suspension: leaf spring Axle 2: Twin tires; Left inner tread: 6 mm; Left outer tread: 8 mm; Right inner tread: 6 mm; Right outer tread: 6 mm; Suspension: air suspension Weights Curb weight: 7,963 kg Payload: 11,037 kg Gross vehicle weight: 19,000 kg Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 1 Financial Information Leasing rate: €371 per month (default, 60 months); Please inquire for more details and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price segments. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Competitive pricing • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The assurance of “recognizable quality” • And more… Visit our website for special offers and our full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us your inquiry via our website. Ask us directly about our European warranty package.