Used Hera Versanotch 200 H for sale (18)

Condition: ready for operation (used), sheet width 2020 mm plate thickness 2.5 mm ST upper clamping bar adjustment 250 mm Lower beam adjustment 80.0 mm bending speed 5.5 sec / Hub bending angle max. 0 - 180 ° Hnodpfxsxabnge Ahyeg Control konv. work height max. 930 mm back stop - adjustable ca. 215 mm engine output 2.6 kW weight 1750 kg range L-W-H 2800 x 1200 x 1450 mm - in checked conditoins - machinevideo - ?v=kFXtKjDlV3k Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual backgauge * Adjustment via handwheel from the rear - Manual lower beam adjustment - 1x freely movable double foot switch - Main switch at the front

Condition: ready for operation (used), Year of construction: 2001, control type: NC control, working width: 2,500 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 6,700 kg, total length: 2,800 mm, total width: 3,950 mm, total height: 1,900 mm, power: 7.5 kW (10.20 HP), stroke length: 450 mm, Motorized swing bending machine Manufacturer: HERA Model: SM4 2500x6mm Year of manufacture: 2001 Technical data Manufacturer: HERA Model: SM 4 Year: 2001 Capacity: 2520 x 6 mm Upper beam stroke: 450 mm Lower beam adjustment: max. 100 mm Bending beam adjustment: max. 100 mm Connected load: Upper beam 5.5 kW / Bending beam 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions approx.: L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Hnodewxc Rpjpfx Ahyjg Equipment • 2 x sharp rail • Bending rails: 10mm, 20mm, 40mm • Segmented gooseneck set: H 120mm • Motorized bending beam adjustment • Hydraulic tool clamping • Programmable backgauge 10–1000mm All information provided without guarantee. A live demonstration is possible at any time in our showroom.

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Hodpfxex Tqvie Ahyjng Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Price: €9,500 plus VAT, ex-location

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm Hnsdpfelp U Txox Ahyeg

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Hnedpjx Td Aiofx Ahyog Year of manufacture: 2002

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Hedpfev H Hfnox Ahyjng

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge Hnjdpfjq A I Upex Ahyeg - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, sheet width 3020 mm plate thickness 3.0 mm ST upper clamping bar adjustment 150 mm Lower beam adjustment 125 mm bending speed ca. 6.0 sec / Hub bending angle max. 0 - 180 ° Control konv. work height max. 930 mm engine output 2.6 kW Hnsdexzuwdspfx Ahysg weight 3500 kg range L-W-H 3400 x 1200 x 1650 mm Features: - Robust electric motor-driven bending machine - Control panel - front right (including control cabinet) - Bending angle adjustment via electric potentiometer - Manual lower beam adjustment - 1x replacement bending rail - 1x freely movable double foot switch - EMERGENCY stop button at the front - Operating instructions (PDF)

Condition: used, 7 pieces Bending tools for bending machine Hnsdsb D Ry Rjpfx Ahyjg Length 3000 mm

Condition: good (used), functionality: fully functional, Bending capacity at 400 N/mm²: 8 mm Usable length: 2500 mm Upper beam stroke: 450 mm Lower beam: 125 mm Hnjdpox A S D Refx Ahysg Bending beam: 125 mm Price: EUR 9,900,-- net

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg Hodju Nfm Topfx Ahyeng space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, Year of construction: 1981, sheet width 2600 mm plate thickness 5 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min voltage 380 V / 50 Hz total power requirement 5,5 kW weight 4500 kg dimensions of the machine ca. 3600 x 2200 x 1600 mm Equipment: • elektric-motoric back stop • manual die clearance • 2 x lay-on arms • Foot switch Hodpfsxuv Hyox Ahysng • Knives as replacement

Condition: used, Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Hodpfxjw I Tu Ns Ahyong Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cutting edge lighting New knives

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec Hjdpfx Ahjuiz I Djyjng table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: used, stroke rate (max.): 28 1/min, sheet thickness (max.): 4 mm, Hydraulic Guillotine Shear Make: HERA Model: HSS 3 2500x4 Year: 1981 Technical Specifications Manufacturer: Hera Model: HSS 3 Working Length: 2500 mm Capacity: 4 mm Passage: 2600 mm Throat Depth: 200 mm Strokes: 28 min⁻¹ Motor Power: 5.5 kW Dimensions: approx. L 3.10 x W 2.00 (plus support arms) x H 1.40 m Weight: approx. 4 t Equipment • Motorized back gauge with digital display 1000 mm • Angle gauge 1000 mm • 2 support arms • Central blade gap adjustment • 1 spare blade Details provided without guarantee. Hedpfx Ahswvi Ebsyong A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, bending force (max.): 110 t, working width: 3,100 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,100 mm MACHINE DETAILS Machine weight: 10,000 kg EQUIPMENT - CNC Delem control - Side safety doors - Two-hand foot pedal - 2 support arms - Upper and lower tools - Hydraulic tool clamping - Crowning system Hnsdpfx Ahoww E Rijysg

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Hnodpsgmn Amefx Ahyjg

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment Hnsdjuagxpjpfx Ahyjg - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts