Used Hess Junior for sale (56)

Condition: good (used), Year of construction: 1992, Single-piece sanding machine Godpfswyda Uex Akyeuc sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 1994, Device description: grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm Gjdpfjwyb Ntox Akyjuc

Year of construction: 2014, condition: not inspected (used), Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments Gjdox Dng Dopfx Akyeuc 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows Gusdpjxnqw Tefx Akyjc 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!) Gedpfxowqr R Aj Akyjuc

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated Guedsv D Rg Depfx Akysc sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow Guedpfx Aovu Hgzskyjc 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides Gedpfx Ast Tqy Eskyouc pressure rollers. Safe transport of profiled workpieces on ca...

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Gsdpfsxgvwpex Akyeuc Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Gsdpfxoxwtwue Akysuc

Condition: not inspected (used), Working width 3500 mm Working height 2500 mm Number of cylinders 5 St. # 6913 Hess Quickstep frame press ----- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) ----- General ----- Working width: 3500 mm Working height: 2500 mm Gsdpfxsy S Diyo Akyjuc Features: ----- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!)

Year of construction: 2013, condition: not inspected (used), Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units Gedpoy Spvljfx Akyouc 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 2,500 mm, total width: 600 mm, total height: 1,350 mm, overall weight: 1,200 kg, We are offering this used Hess Korpus Express carcass press, manufactured in 1994, for sale. Year of manufacture: 1994 Weight: 1200 kg Dimensions Length: 2500 mm Dimensions Width: 600 mm Dimensions Height: 1350 mm The machine was in use at our facility until recently. It is currently being sold due to restructuring. Guedpfxjzaku Ds Akyjc If you have any questions or require further information, please send us a message or call us.

Condition: used, With swiveling heating rail Gujdpfey N Dinjx Akyec

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 1,500 kg, No. 3272 Gedpfxjy E N Ize Akysuc Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Hess HYDRO-LUX hydraulic frame press Gsdpey Srygsfx Akysuc

Condition: ready for operation (used), Year of construction: 1998, A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible. Gsdsy Rtg Sopfx Akyouc

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 The press is operational and in good technical condition. Press infeed • Glue application machine with 2 rollers Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm • Height: 3,350 mm • Weight: 13,500 kg Godpfxey Rzk Sj Akyjuc

Year of construction: 2002, condition: like new (used), functionality: fully functional, L x W x H: approx. 12,1 x 3,0 x 3,25 m Gsdpfxellvpzo Akyjuc Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Gjdpfx Ajy A Hkhskyeuc Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Pressure system: electrohydraulic Gedpfx Akey A Hkzeyjuc Press pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: excellent (used), Working length 250 cm Height 136 cm Width 60 cm Pneumatic drives Gedowgky Uspfx Akyouc Electric lifting

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Gedpoxliqgjfx Akyeuc

Condition: used, mileage: 931,635 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, = Additional options and accessories = - Adjusted for handicapped Gjdpfx Aoy Hu R Djkyjuc - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Mp-3 - Parking sensor - Reverse camera - Sun visor = More information = Engine capacity: 8.849 cc Make of engine: Cummins

Condition: used, mileage: 884,791 km, power: 228 kW (309.99 HP), first registration: 11/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, = Additional options and accessories = Godpfxoy Ht Uuo Akysuc - Adjusted for handicapped - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Mp-3 - Parking sensor - Reverse camera - Sun visor = More information = Engine capacity: 8.849 cc Make of engine: Cummins Tyre tread remainder on axle 1: 40% Door count: 2/3