Used High Speed Punching Machine for sale (83,670)

Year of construction: 1998, condition: ready for operation (used), A hydraulic sheet punching machine Indumasch without sheet manipulation axes, but with CNC backgauges for manual sheet positioning, is available. Punching force: 40t, max. sheet thickness: 10mm, stroke rate: 150/min, max. punching diameter: 105mm, working dimensions X/Y: 1000mm/750mm, positioning accuracy: 0.1mm, weight: approx. 3500kg. Without tools. The controls were overhauled in 2014. Documentation available. An on-site inspection is possible. Bedpfx Aeyviyljb Uslf

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V Bsdeym Nbcspfx Ab Uelf frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Year of construction: 2021, condition: good (used), Die Cutting and Embossing Machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Minimum sheet size: 300 x 350 mm Maximum sheet size: 760 x 1,060 mm Maximum machine speed: 8,000 sheets/h Maximum die cutting pressure: 2.6 MN / 260 t Materials and pile height (including pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Maximum feeder pile weight: 1,500 kg Bedpfx Aevxu Smeb Uelf Without blank separation station Without MasterSet 18326ä

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min Bodpfoyutuiex Ab Ujlf The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, In stock CW, XCW & DCW plate standard/ bevel quick-change welders for excavators . Hardox 400 price incl. VAT CW00 36,- CW05 115 CW10 174,- CW20 335,- CW30 400,- CW40 410,- DCW05 97,- DCW10 190,- DCW 40 410- XCW 00 30,- XCW 05 100,- XCW 10 120,- XCW 40 610,- Hole size 30 - 60 mm R 30 - 60 mm distance between hole and hook 150 - 475 mm Trading company Pieper Nijkerkerstraat 71 3882 PD Putten (Gelderland) Bsdjf Tny Sepfx Ab Uolf

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Bsdpfxox D Nwwj Ab Uolf Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), functionality: fully functional, IMS punching machine, model PHY 45. Punching: diameter 27 x 13 mm. Used machine. Internal code: SVR 402. Bjdpoyv Hqzjfx Ab Uslf

Condition: like new (used), functionality: fully functional, punching force: 30 t, total length: 1,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Euromac Punching Machine Cx 1000/30, 30 Ton, CNC, Sheet Length 1000 mm, Maximum Thickness Standard Steel 6 mm. Used machine. Internal code: svr 405. Bjdeyv Hntepfx Ab Uelf

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Blsdpeuqd Tmsfx Ab Uef Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was 2021 converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Bljdpfx Abjwykccs Ujf

Condition: excellent (used), Year of construction: 1998, Technical Data: Punching force: 23 t Max. sheet thickness: 8.0 mm Machine travel X and Y: 2500 / 1250 mm Sheet dimensions: 2530 x 1270 mm Max. repositioning: 5000 mm Max. loading weight: 200 kg Number of tool stations: 20 Max. punching diameter: 89 mm Punch stroke: hydraulic Max. turret revolutions: 23 rpm CNC control: SIEMENS Sinumeric 840D Max. strokes per minute: 300 /min Motor power: 30 kW Dimensions (L x W x H): approx. 5500 x 5500 x 2500 mm Bljdpfxeyup N Ns Ab Ujf Machine weight: approx. 12.5 t Condition: Overall very good condition The seller is not liable for typographical or data transmission errors. The machine is in appearance, technology, and wear according to its age; used machines are sold without any guarantee.

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Bodpfsh Eh U Rsx Ab Uslf Paper format: ca 31x45cm

Condition: used, Multi-speed machine with flexible shaft BIAX type MB 4-2 Machine no. No. 9/50/55 Year of construction approx. 1970 Length of the flexible shaft: 2 meters Speed: 900 - 9000 rpm infinitely variable Motor speed: 3000 rpm Bljdpfx Abefim Tij Uef Motor power: 1.2 kW = 1.5 HP Mains connection: 380 Volt, 50 Hz - Handle straight grinder with collet Ø 6 mm - Swivel and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg good condition Universal for milling, grinding and polishing work

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Bsdpfxequhbgj Ab Uslf Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Blodpfx Abef Axn Uo Usf dead weight 6.5 kg good condition

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Bledpfx Aoi Duh Isb Ujf Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Bsdpfx Absh U Dtus Ujlf Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Blsdpsfxg T Uefx Ab Usf Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA Bsdsyi Hpcjpfx Ab Ujlf fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Condition: used, Year of construction: 1985, operating hours: 35,288 h, machine/vehicle number: 10661, total height: 2,200 mm, total width: 1,200 mm, total length: 1,700 mm, pressing force: 25 t, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a MABU 25 VP /RC, which, given its age, is in good condition. The machine is still in use in serial production and operates reliably. An inspection and test run are possible in ongoing production until the end of week 18/2026. This gives you the opportunity to personally verify the machine’s performance and functionality. Nominal force: 250 kN Stroke rate: 12⅓–500 spm Feed: MABU 120/150 Adjustable stroke: 7–62 mm Main drive: 3.7 kW Power supply: – Adjustable stroke: 7–62 mm Table dimensions: 400 x 360 mm Adjustable strip entry height: 10–140 mm Max. strip width: 35 mm Max. material thickness: 1.5 mm Machine dimensions: 2115 x 1662 x 1190 mm Weight: 2500 kg "Main drive on (runtime) Bledpfx Abjyu S Ete Ujf (Control cabinet counter)" 35,288 h A sound enclosure is optionally available for purchase.

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. The machine is currently integrated into ongoing production and can therefore be viewed and tested under real operating conditions. Inspection and extensive functional testing are possible until the end of calendar week 20/2026. Thanks to continuous use, the machine is in excellent technical condition and ready for immediate operation. All maintenance and servicing work has been carried out regularly and meticulously. Technical data: Rated force: 500 kN Strokes per minute: 100-1120 spm Feeder: BBV 202/120 Adjustable stroke: 16-51 mm Bodoyu Sn Iopfx Ab Uolf Die space / Clamping plate: 760-940 mm Main drive power: 22 kW Power supply: 400 V / 50 Hz Adjustable stroke: 16-51 mm Ram surface: 980 x 420 mm Table surface: 940 x 580 mm Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual running time): 42,416 hours" An acoustic enclosure is available as an option.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292500 € 248700 € 30 to 3000x1500 mm 3000 mm 1500 mm 70 m/Min 60 m/Min 120 m/Min 40 mm 1200 1/Min 325 1/Min 2800 1/Min 6 mm 3 mm 3 mm 1.5 mm 28 0,1 mm 0,05 mm 22 U/Min 150 U/Min 200 kg 940 mm 6 bar 88.9 mm 15 kW 180 l 6650 mm 7650 mm 6300 mm 8300 mm 2310 mm 18250 kg SPECIAL CAMPAIGN UNTIL 23.12.2025 Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm Bodpfeynna Hex Ab Uolf 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station Index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules PRICE FCA TÜRKIYE

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 212400 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min Bodpfx Aoynnayob Uelf 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg SPECIAL CAMPAIGN UNTIL 23.12.2025 Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 178400 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg SPECIAL CAMPAIGN UNTIL 23.12.2025 Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm Bodpfxeynnats Ab Uelf 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H – a proven and powerful high-precision stamping press designed for maximum reliability and accuracy in series production. The machine is currently still in operation and can therefore be inspected and tested under real production conditions. Acceptance and trial runs are possible until calendar week 17/2026. Due to its ongoing use in production, the system is in technically flawless and fully operational condition. Regular maintenance and servicing have been carried out. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Field of application: High-precision stamping for series production Condition: Technically flawless, ready for immediate use Availability: By arrangement / from CW 17/2026 A soundproof cabin is optionally available. Technical details: Nominal force: 800 kN Stroke rate: 100–1000 spm Feed unit: BBV 320/200 Adjustable stroke: 16 – 63 mm Die area / Bolster plate: 970 mm Main drive / Power: 43 kW Power supply: 380 V / 50 Hz Ram surface: 760 x 510 mm Table surface: 950 x 910 mm Adjustable strip entry height: 80–180 mm Bsdpfx Abjyu Nipo Uolf Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15,550 kg