Used Hole Plate for sale (15,017)

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Davi, controller model: digital position readout, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4roll 2000x6 mm plate bending machine Davi year 2004 used plate roll in working condition, Planetary hydraulic dual pre-pinch Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling ID 220 mm rollers length 2050 mm Upper roll D 165 mm Pinch roll D 155 mm Side rolls D 120 mm Power electric motor 3 kw on hydraulic unit Voltage 3ph 400/50 mm Chsdj Ahg Ayspfx Aqvod Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic control manual leverage distributors Variable working speed Digital position readout --- Hydraulic driven motorized central rolls Pre-pinch pressure adjustable pre-bend Drop-end open unloading fully round shells Calibration system for welded seam re-rolling Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, alignment plate, scribing plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate Chsdpfe Ahnhxsx Aqvsd -Manufacturer: JFA Johann Fischer Präzisionswerk, high-quality granite measuring, scribing and marking plate -Tabletop: 1500/1000/H200 mm -Base cabinet: -Dimensions: 1545/1045/H1000 mm -Weight: 1000 kg

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang Chjdpfx Aqjz E Sahjvjd 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 25072, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: DELSY EASYCOM, controller model: EASYCOM 4AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,900 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm -Thickness plate roll 6 mm -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 Code Ahgwijpfx Aqvjhd - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital position readout of the 4 rollers for automatic programmable control and/or manual bending use by operator. Opening hydraulic drop-end machine front for the unload of fully round bending. Variable working speed fast-slow controlled Safety installation with emergency stop. Instruction manuals for operation and service.

Condition: excellent (used), Year of construction: 2009, Single Cassette Autoloader SA-L 8000 Extra Cassette für SA-L 8000 PLATE STACKER PST 480C Plate Size Max: 1,160 x 940 mm Plate Size Min: 450 x 370 mm Chsdpfezqudcox Aqvod 20 plates/hr at 2,400 dpi

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm Cjdpe Ahlkyofx Aqvehd dimensio between the first plate to the spindle ca. 170cm

Condition: used, Year of construction: 1993, offered without plates. Chjdpfxj Ahlume Aqvsd Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

Condition: used, Guest Plate, Adapter Plate / Mounting Plate for Demag 330-Ton Injection Moulding Machine – Used Machine Manufacturer: Demag For sale is the factory-made, precision-machined guest plate (adapter plate / mounting plate) shown in the photos, in excellent condition. It is specifically designed for Demag 330-ton (330T) injection moulding machines. Overall Dimensions: Width: 1040 mm Depth: 950 mm Csde Ahya Eopfx Aqvjhd Height: 100 mm Weight: 770 kg

Condition: ready for operation (used), Year of construction: 1989, travel distance X-axis: 9,900 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 800 rpm, total width: 6,000 mm, total length: 12,000 mm, total height: 4,000 mm, feed length W-axis: 350 mm, spindle diameter: 152 mm, table load: 30,000 kg, table height: 800 mm, table length: 2,500 mm, table width: 2,500 mm, spindle stroke: 1,350 mm, workpiece weight (max.): 30,000 kg, distance table to spindle center: 200 mm, overall weight: 70,000 kg, drill spindle length: 1,000 mm, year of last overhaul: 2020, type of input current: AC, PAMA ACC 152/350 CNC FLOOR TYPE BORER COLUMN TRAVEL (X) 9.900 MM. HEAD VERTICAL TRAVEL (Y) 2.500 MM. RAM TRAVEL (W) 350 MM. SPINDLE TRAVEL (Z) - ISO 50 1.050 MM. Codpe Ahfk Asfx Aqvohd RAM Ø 600 MM. SPINDLE Ø 152 MM. SPINDLE SPEEDS 2 ÷ 800 RPM. CNC SINUMERIK 840 D BUILT/RETROFITTED IN 1976/96/2020 COMPLETE WITH: - CNC ROTARY TABLE 2 AXIS: 2.000 x 2.000, 30 TONS., TRAVEL 1.500 - BIROTATIVE MILLING HEAD - N. 6 FIXED PLATES 5.000x1.500x350 H MM.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 4HEL, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 240 mm, sheet thickness (max.): 28 mm, sheet thickness steel (max.): 28 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 28 mm, overall weight: 11,500 kg, total length: 4,200 mm, total width: 1,950 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine linear guideways Faccin model 4HEL capacity 2100 x 28 mm Used in perfect condition year of make 2006 Plate bending capacity Plate width 2000 mm Rolling thickness 25mm Plate prebend 20 mm smaller bending capacity ID 400 mm Rolls length 2100 mm Upper roll dia 350 mm Pinch roll dia 330 mm Siderolls dia 240 mm Electric motor Kw 18,5 on hydraulic unit Vac 400/50 Weight of the machine 11500 kg Layout mm 4200 x 1950 x H 1650 mm Codpfxj Afu Sae Aqvohd Hardened surface of the 4 rolls of the rolls high strength Driven rollers hydraulic powered with axial gear unit rotation Opening of top roll hydraulic drop-end to unload the plate being formed Variable speed working roll bending rotation hydraulic speed fast/slow up to 7 mtr/min Console electric with centralized commands joysticks and digital readout 3 axis. Digital readouts of the rolls position

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: HDTS 2050X22, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 290 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 9,800 kg, total length: 4,400 mm, total width: 2,050 mm, total height: 1,660 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 2000 X 22 MM brand OMCCA YEAR 2004 DOUBLE INITIAL PINCH Machine used in excellent condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 22 mm - Prebend thickness 16 mm Minimum bending diameter ID 400 mm Rolls dimensions: Useful length 2050 mm central rolls upper/lower D 320 mm side rolls left/right D 290 mm Hardened rolls surface high strength Chedpfx Aqo Afzunovod Driven rollers rotation central upper and lower Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. Opening of top roll hydraulic drop-end to unload the plate being formed Wide opening plate feed up to 90 mm between the central rollers Variable speed working roll bending rotation automatic slow/fast Console electric on wheels with centralized commands joysticks and digital readout 3 axis. Digital position readouts of the rolls Power electric 15 Kw voltage 3-phase 380 /50 Dimension 4400 x2050 x H 1660 mm - weight 9800kgs

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, alignment plate, scribing plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: JFA Johann Fischer Präzisionswerk, high-quality granite measuring, scribing and marking plate -Tabletop: 1500/1000/H200 mm -Base cabinet: lockable, without lock -Dimensions: 1545/1045/H1000 mm -Weight: 1000 kg Chjdpj Ahgpuefx Aqvjd

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, alignment plate, scribing plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Hommel, high-quality granite or natural hard stone measuring, marking and marking plate Chsdpfo Ahgnpsx Aqvod -Type: Dura Gen. 0 -Tabletop: 1600/1000/H165 mm -Adjustable feet: Ø 315 x 695 mm -Transport dimensions: 1650/1045/H220 mm / 630/630/H695 mm -Weight: 936 kg

Condition: good (used), functionality: fully functional, roller (bottom) diameter: 190 mm, roller (top) diameter: 200 mm, 4 - Roller-type round bending machine Manufacturer: Schäfer Model: SVRM Year of manufacture: 1990 Max. working width 2700 mm Max. sheet thickness: 7 mm, with 5 mm pre-bending capability Upper roller: 200 mm, driven Lower rollers / side rollers: 190 mm diameter, driven, with clutch Feed: hydraulic Digital displays Control panel with digital displays Cjdpfo Ahkn Tjx Aqvehd

Condition: used, total length: 6,500 mm, total width: 3,450 mm, total height: 3,930 mm, Year of manufacture: 2002 Colour: Green Empty weight: 94.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 385 - Drive system: CNC - Control system brand: Swebend - Control system type: 2021 Seven X CNC - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 163.0 - Max. sheet thickness [mm]: 77 - Max. prebending thickness [mm]: 65 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 700 - Bottom roll diameter [mm]: 700 - Options: Cone rolling, Plate support Chsdpfxs Agn Svs Aqvjd - Transport dimensions: 6500mm x 3450mm x 3930mm (l x w x h) - Transport weight [kg]: 94000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1978, functionality: fully functional, sheet width . mm Chedpfxoucgvao Aqved plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm Chedpfx Aqozk N Dwovjd - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Year of construction: 2001, Technical data: Working width: 4700 mm Max. bending capacity: 3.0 mm Max. bending angle: 3.0 mm CNC control Cjdpfj Ah Hucsx Aqvohd Diameter of upper roller: 255 mm Diameter of side lower rollers: 255 mm Diameter of central lower roller: 255 mm Conical bending mechanism through angled positioning of the two side rollers Hydraulic tilting bearings Mobile control panel with display CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1800 mm Weight: approx. 9 tons Accessories: Side sheet support device Condition: Very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1980, plate height: 220 mm, plate width: 2,000 mm, groove spacing: 400 mm, plate length: 4,010 mm, T slotted bed plate STOLLE - RDG MACH-ID 7444 Make: STOLLE Type: RDG YOP: 1980 Floorplate Length: 4010mm Floorplate Width: 2000mm Height: 220mm No. Of T-slots: 13 Distance from T to T-slot / Jump:400mm T -slot size: 35mm Weight a plate approx.: 5300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Cjdpfx Aqo Ahhx Uevehd

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Cedpfozkty Aex Aqvjhd Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1975, Number of spindles: 20 Drill spacing: 32 mm Cjdpfey E Hfkex Aqvohd Power consumption: 1.8 kW

Condition: good (used), Year of construction: 1997, sheet width - max. 1530 mm plate thickness 13.0 mm ST plate thickness 8.0 mm VA plate thickness 18.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 2.5 ° work height max. 960 mm Control LCD Touch total power requirement 22.0 kW weight of the machine ca. 7000 kg range L-W-H 2750 x 2400 x 2200 mm Previously located at a Chamber of Crafts Custom-built machine from 1997 Good condition (!!) Features: Codpfx Aqe Agpg Ajvjhd - Heavy-duty/robust NC electro-hydraulic guillotine shear - With FASTI "LCD Touch" control unit * Swiveling, front left - NC electro-motorized backgauge - Manual cutting angle adjustment - Cutting gap adjustment - 1x sturdy side stop, with scale - 2x front support arms - Support table with recessed handles - 1x freely movable foot switch - Rear sheet metal chute - Original operating instructions

Condition: used, sheet width 1060 mm plate thickness 1,5 mm Chodpfxe Ahrzbo Aqvod

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling Cedpfe Ahkinsx Aqvjhd cones and funnels.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10142 Manufacturer: TIBO Type: M10-250NC Year of construction: 2002 Type of control: CNC-Steuerung Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Chjdpfe Ahmuaex Aqved Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment