Used Homogenizer for sale (205)

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch climatic test chamber, air-cooled Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Test chamber 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W Climatic tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Gbjdjtz T D Aopfx Ah Eew Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Gjdpfefiulfjx Ah Ejbw Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 1995 Vacuum Tumbler is a high-performance industrial machine, engineered for meat and food processing plants. With its large capacity, it efficiently handles significant volumes while ensuring optimal homogeneity in blending operations. It fully meets the requirements of businesses looking for productivity, quality, and reliability. Additionally, this vacuum tumbler provides precise processing for meat with or without brine. The vacuum mixing process enables better marinade penetration and enhances the final product texture. Moreover, it reduces yield losses while optimizing preparation times. Operators benefit from a robust machine suitable for high-throughput production lines and the demands of modern manufacturing. The Lutetia Type 5 features a combination of versatility and durability. Its stainless steel construction and rotating drum system deliver excellent wear resistance and simplified maintenance. Its footprint is also suitable for demanding industrial layouts. Thanks to its outstanding performance, it is a strategic choice for workshops aiming to modernize their machinery while controlling costs. Europ'Equipement offers this second-hand tumbler, reconditioned and tested by our technicians. You benefit from a reliable machine, restored to operational condition and compliant with industrial standards. Contact us today for more information on this equipment and to request a customized quotation. Technical specifications: Capacity: 3,600 to 4,000 kg Effective volume: 6,750 L Gsdpjw I R E Eofx Ah Eobw Empty weight: 3,000 kg Overall length (A): 3,500 mm Length without cover (B): 3,200 mm Drum length (C): 2,550 mm Width (D): 2,050 mm Diameter with reinforcement (E): 1,950 mm Overall height (F, AP and SP): 2,450 mm Shaft height (G): 1,515 mm Loading height (H): 1,238 mm Height below discharge chute (I): 1,170 mm

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Gsdpfswwnfpex Ah Ejbw Uniform and constant coating across the entire working width thanks to an innovative technical solution and special vibration dampers that compensate for any deviations on non-smooth embossed panels. Coating rollers: with a special coating made of "acid-resistant synthetic rubber" allow various adjustments and therefore a long service life. Homogeneous DOSING of the glue thanks to adjustable distribution trays. Accident-proof PROTECTION DEVICES on all moving elements ensure optimal safety for the operating personnel. ELECTRICAL SYSTEM: perfectly sealed in accordance with European standards, with push-button control panel, 24 V voltage. Technical data: Working width 1300 mm Working height 100 mm Application roller diameter 185 mm Feed speed 18 m/min Drive motor 0.37 kW Working surface height 800 mm Dimensions: Length 780 mm Width 2000 mm Height 1350 mm Weight 340 kg Incl. basin for collecting the water made of INOX steel Incl. upper and lower glue container made of stainless steel Location: Flörsheim Availability: Immediately

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Gsdpfxjvmq Tij Ah Ejbw

Condition: used, functionality: fully functional, total length: 3,500 mm, total width: 2,500 mm, total height: 1,850 mm, input voltage: 400 V, power: 76 kW (103.33 HP), The stainless steel bowl cutter from Meissner is a multifunctional cutter that can be used in many production processes. This cutter allows you to efficiently cut, emulsify, and mix. It is a highly versatile machine suitable for processing various types of meat, fish, poultry, game, vegetables, fruits, nuts, confectionery, chocolate, and cheese. The cutter’s efficient cutting and mixing capabilities ensure that the product is processed into a homogeneous mass. The cutter is easy to operate using push buttons. Gbodpfxew I Auro Ah Esw The machine is equipped with a standard trolley lift to make product input as easy as possible. The discharge mechanism enables effortless and quick emptying of the bowl. This cutter is fully constructed from stainless steel. Capacity: 200L Knife speed: 1500/3000 rpm Bowl speed: 7/14/21 rpm Mixing function: 1 speed Equipped with standard trolley lift and ejector Voltage: 380V (3+N, 50Hz) Power: 76 kW Weight: 4500 kg Machine dimensions in mm (W x D x H): 3500 x 2500 x 1850 mm

Condition: good (used), White Type: WK1-1000/70 Weiss climatic test chamber water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Feedthroughs The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs: 1 feed-through ∅ 125 mm installed on the right 1 feed-through ∅ 50 mm installed on the left Volume 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, 1980 mm Data for temperature tests: Minimum temperature -70 °C Maximum temperature +180 °C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 2 K Temperature change rate, heating 4 K/min Temperature change rate, cooling 2.5 K/min Max. heat compensation 2750 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ± 1 K Humidity deviation, temporal ± 1 to ± 3% r.h. Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A Nominal power 19.8 kW Refrigerant: R-452A/ R23 Weight approx. 910kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Gbedorvx Ezspfx Ah Esw (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2007, condition: good (used), RECEPTION, PROCESSING & STORAGE OF RAW MILK This line consists of: Gedpen Nx Utefx Ah Eebw 1. Blower with digital counter with touch panel; exchanger for milk cooling type APV with associated pumps and installations capacity of 10 000 l/h; 2. Two raw milk storage tanks capacity of 17 500 l and one tank capacity of 10 000 l, with associated vent pipes and installations; 3. Pasteurizer type APV with associated vent pipes and armature; 4. Separator ALFALAVAL with associated vent pipes and armature; 5. Homogenizer type APV with associated armature; 6. Standardizer type APV with capacity of 10 000 l/h and every machine has its own electrical box; 7. Automatic central industrial washing with triple chamber, with capacity of 9 000 l with associated vent pipes and armature. (The whole process is automatic and also includes truck washing, it is managed from management cabin); 8. Process tank for yoghurt production with capacity of 8 000 l with refrigerator and adjoining pumps and armature; 9. Process tanks for cream: 2 x 1 500 l and 1 x 3 000 l, with associated pumps and armature; The equipment was installed in 2007 in the same period when the whole automatic management in the company has been done. All automation is SIEMENS. Equipment is in the top state. Process of production is stopped in December 2017.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ Gsdpfxjw N In Hs Ah Eebw MACHINE DETAILS Weight: 7,100 kg Operating hours: 17,000 hours EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Year of construction: 2025, condition: new, Continuous fryer ( ELECTRIC, GAS, OIL ) or frying train ideal for a large production auromatically, having the minimum use of labor and with high productivity. This chain fryer is designed for pre-fried, fried potatoes, fried foods such as croquettes, marble foods, flamenquines, nuggests, cachopo, plate of ham and cheese,... ,pastry products in general such as: churro, fritter, doughnut, xuixo, donut, creme filled pastry; Nuts: peanut, almonds, cashews,... Even for baking pasta. Thanks to its extremely simple control panel, it is easily programmable. Simply enter the ideal frying temperature on the thermostat and select the belt speed most suitable for the product. Our continuous cycle fryer saves you time in production. TECHNICAL CHARACTERISTICS: - It incorporates a speed variator that allows the regulation of the cooking time of the product that is made, with the intention that it always has the ideal cooking time and adapted to an infinity or products. - It allows a homogeneous frying or cooking, with less oil absorption at a lower cost thanks to the reuse and filtering of the oil. Thanks to this, the oil is more durable and of higher quality. - Optional availability of including extraction hood in the fryer itself. Gbsdpfxog A Tvkj Ah Eow - Easy cleaning and disassembly. - Oil filtering system by means of a re-circulating pump to the tank. Mobile machine with brake Connection 240 / 400V, o G20 (GN) G30(GLP) Dimensions see various dimensions. New machine With warranty. Price from 12.230€ FEC60 = 60 Liters FEC70 = 70 Liters FEC100 = 100 Liters FEC150 = 150/225 Liters FEC250 = 250/370 Liters

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Gjdpfx Aewtg Ihoh Esbw

Condition: as good as new (ex-display), Year of construction: 2025, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content Gbjdpfx Aow I R Rnsh Eow - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Here we offer a Weiss climate test chamber. Weiss climate test chamber water-cooled (refrigerant converted to R-452A) Temperature test Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Godpfxeq U Sdcj Ah Ejbw Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ±1.5 K Climate test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ±1 K Humidity deviation, temporal ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1999, condition: good (used), COMPLETE DAIRY - in full production function We offer for sale a complete dairy for the production of consumable, pasteurized milk, yogurt, kefir, cream and cheese (fresh and sliced cheese) Capacity: 15 – 20,000 L of milk/day Milk is packed in PVC bags of 1.0 L - capacity 2,400 pcs/h Yogurt is filled in: - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h - PET bottles 0.5 and 1.0 L - capacity 1,000 pcs/h Kefir is filled in PET bottles 05 and 1.0 L, capacity 1,000 pcs/h The cream is filled in: -bowls 1000 gr - capacity 3,000 pcs/h Gsdpsk I T Sisfx Ah Esbw - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h Cheese is filled in: - buckets of 5 and 10 kg - fresh cheese -vacuum foil - fresh and white cheese slices 500-1,000 gr Equipment specification - manufacturers from Italy - Slovenia and Serbia Reception line Digital meter with foam remover, 2014 Tank horizontal (lactofreeze) 3,200 L cooling on freon - 3 pcs Tank vertical 3,000 L – 2 pcs Pasteurization line Pasteur (flow-through) with retainers 2,000 L Separator (self-cleaning) 2,000 L Homogenizer 2,000 L The equipment is adapted to the capacity and made to order Manufacturer Scremac Italy 2000 years. Fermentation line Duplicator 2,000 L – double wall insulated with planetary mixer 2010. Duplicator 1,000 L – double wall insulated with planetary mixer 2010. Filling lines Two-row automatic filling machine for filling cream into bowls Automatic filling machine for filling cream and yogurt per 410g, 2014. Automatic filler for filling yogurt and cream 180gr, year 2008. Filler - capper - dater - automatic packing tunnel Fills 1.0 L and 0.5 L bottles, 2016 Filling machine for milk and yogurt in PVC bags 2400 pcs/h. Original French manufacturer, older year. Videojet - automatic date marker, - 2 pcs Cheese tub insulated with HARFO 1,600 L, 2008. Triblender 500 L for the reconstruction of powdered milk, 2015. Vacuum cleaner for fresh and white cheese slices Ice water pool (STAINLESS STEEL VESSEL) 10,000 L, FREON cooling, manufactured by KOTA-Slovenia, year 2000. A new compressor has just been put on it. Chip for washing 3 x 2,000 L, automatic, year 2010. Semi-automatic PET bottle blower 1.0 and 0.5 L with Boge compressor, year 2010. Complete cooling system for cooling the warehouse of finished products, and the same is programmed for heating and cooling the fermetal chamber, year 2010. manufacturer KOTA-Slovenia, with 3 engines Mini (drive laboratory) Solid fuel boiler (wood) 250 kW Mono-pump All equipment is connected by pipe fittings and pumps for operation. The start of the dairy: 1999 The equipment is in full production function and can be seen in operation It is regularly serviced and maintained - the last service was performed 6 months ago Installed power 50 kW Solid fuel - wood - is used as energy Required hall size: 500 m2, height 4 m 16 workers work in the dairy The complete dairy is for sale, not in parts.

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. Gbedpfjim Ik Ssx Ah Eow The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2025, condition: new, Motorised Tilting KETTLES Frying Pan with Scraper, tiltable, made entirely of stainless steel for food preparation, which can be unloaded onto trolleys by means of motorised tilting, maintaining the height of the unloading mouth It is manufactured with a double thermal oil bottom and an inner tank that is easy to clean by means of a removable remover with blades that rub against the walls to prevent the product from sticking and subsequent cleaning. It is double-sided with a total thermal insulation coating to save energy. Technical features: It has a control panel with electronic touch screen for programming, speed control and direction of rotation of the scrapers, frying temperature, frying time and recipe programme. Acoustic warning system at the end of the programme. Automatic emptying of the product by means of a button on the panel. Models SBE100A, SBE150A and SBE200A are fitted with castors. Stainless steel feet with height adjustment on models SBE300A and SBE500A. The electric models have armoured heating elements immersed in thermal oil that produce homogeneous heating throughout the frying pan. The gas models have very precise ventilated burners, electronically controlled, which can be LPG, NG or Diesel. Adjustable temperature from 50 to 210ºC. Recipe book on programmable electronic board. Capaciti 10, 24,50,100,150,200,300 y 500 L. Gsdpfx Ahog A Rhgs Ejbw Price from 4989€

Condition: used, Applicable material: Concrete Polygonmach offers high variety of concrete, mortar mixers. Pan,planetery, single shaft, twin shaft, cone mixers are our type of mixers. Every mixer type is developed for a concrete type or user application. Twin shaft mixers are for high volume of standart concrete production. From 1 to 8m3 capacity abilitiy make this mixer the most preferable type. WE use ni-hard casting arms,paddles,caps,pallets, Specific bearings, automati lubrication system gives long life and easy to spare parts changes. Twinshaft mixer has got double shaft located paddles, arms, pallets, caps bolted on shaft. The inner mixer construction has wearing and abbrasive ability. Upn material sio2 rate , the lifespan of inner mixer changes. The body and side wearing plates made from Hardox400. Automatic lubrication is installed and programmable on customer request and requirements. Twinshaft mixer vary from 1 to 8m3 on request of customer. Multiple mixer operations is supported by our projects. This mixer is suitable for high volume of ready mix procductions. Twin shaft mixer has got high rate of homogenity in short time of period. Mobility: stationary Gbedpfx Ahew Hztrj Esw Other characteristics: automatic Capacity: Max.: 6,250 l(1,651.1 gal)Min.: 1,000 l(264.2 gal)

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Gbsdoft R Swopfx Ah Ejw We can answer further questions for you on the phone.

Condition: used, Applicable material: Concrete Cargo space capacity: 30.000 l POLYGONMACH 30 M3 Compact concrete batching plant is a pre-designed concrete batching plant for concrete production. Compared to other concrete batching plants, it has a smaller size, less capacity and a mobile structure. For this reason, it is used in the construction industry, especially in small-scale projects. Compact concrete batching plants often have the advantages of fast installation and easy portability and therefore offer practical solutions in construction projects. The PCC30 M3 compact concrete plant can provide many advantages. Some of these can be listed as follows: 1. Easy installation: Thanks to its compact design, the PCC30 M3 concrete batching plant is very easy to install and requires minimal space. 2. High efficiency: The PCC30 M3 concrete plant offers high efficiency. It can produce 30 cubic meters of concrete per hour, which speeds up the completion of large projects. 3. Energy efficiency: The PCC30 M3 concrete batching plant has been developed to save energy. Thanks to the high-quality motor and other components, the concrete production process consumes less energy. 4. Low cost: The PCC30 M3 concrete plant offers a low cost production option. Thanks to its compact design, it requires less space, which indicates a low investment cost. Gbjdpfsw Hzl Uox Ah Eow 5. Production of high quality concrete: The PCC30 M3 concrete batching plant produces high quality concrete. The homogeneous preparation of the concrete mixture and the desired quality control are realized with full automation. 6. Portability: The PCC30 M3 concrete batching plant has a portable structure and is easy to use in the field. Mobility: mobile Other characteristics: compact Capacity: 30 m³/h(1,059.44 ft³/h)

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Gbedpfx Asgqux Noh Esw Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: used, Applicable material: Concrete POLYGONMACH 120 M3/hour stationary concrete batching plant is one of the high capacity stationary concrete batching plants. These plants are used to produce high quality concrete for large construction projects and infrastructure activities. POLYGONMACH 120 M3/hour fixed concrete batching plant has a capacity of 120 m3/hour and operates fully automatically. Concrete mixing, conveying and unloading processes are fully automatic. In addition, these plants have special designs that facilitate the production of high quality concrete. They give superior results in factors such as concrete strength, quality and homogeneity. These power plants are often used for large-scale construction projects such as large bridges, dams, hydroelectric power stations, highways and shopping malls. Due to their stability, they guarantee on-time delivery and high productivity. Gjdpfxew Hzims Ah Eebw POLYGONMACH 120 M3/h stationary concrete batching plants are also known for their environmental friendliness. They have low energy consumption and low emission levels. Therefore, they are the preferred solution in sustainable projects around the world. Thanks to these features, POLYGONMACH 120 M3/hour stationary concrete batching plants are a frequently preferred option in the construction industry. Different types of mixers can be used in POLYGONMACH 120M3 concrete batching plants. 1. Rotary mixer: Rotary mixers work by rotating the drum while mixing the concrete. These mixers are suitable for both small and large-scale jobs and provide high performance. 2. Static mixer: In static mixers, fixed systems are used instead of parts to be held together to mix the concrete. These mixers may cost less but perform less well Mobility: stationary Other characteristics: automatic, special Capacity: 120 m³/h(4,237.76 ft³/h)

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climate test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Gedpoqnutmofx Ah Eobw Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Rate of temperature change: Heating 4.0 K/min Cooling 3.0 K/min max. heat compensation at +20°C 4500 Watt Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 Godpfxsw Hzfzo Ah Eobw FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Gbodpfx Ahev Sr Hzs Esw Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 Gsdpfjw Hzcaox Ah Esbw 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.