Used Horizontal Band for sale (9,365)

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension Nedpefg E Hvefx Agzodf • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, Column-mounted semi-automatic bandsaw METORA - KALTENBACH type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting area round Ø 380 mm Square 380 x 380 mm Saw blade dimensions 5650 x 34 x 1.1 mm Saw blade speed 25-108 m/min. infinitely variable Material infeed height 870 mm Hydraulic drive power 1.5 kW Saw motor drive power 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design - Hydraulic saw arm lowering with infinitely variable cutting pressure adjustment - Infinitely variable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base frame - Material feed roller on the infeed side with geared motor - Coolant unit with cooling lubricant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for cooling water and hydraulics Nsdpfx Ajdzqtgogzsdf - TRENNJAGER type EX-Stop1 cross-cut fence, with handwheel adjustment, digital display and hydraulic fence carriage clamping Fence overall length 6750 mm, fence travel 5650 mm, fence arm can be folded up hydraulically without roller conveyor Space requirement of the basic machine L x W x H 2800 x 1400 x 2450 mm Weight of the machine approx. 3 tons Weight of the stop system approx. 800 kg good condition

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm Nedpfxewyfa Ae Agzodf cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control Ndjdjw En Efopfx Agzsf total power requirement 5 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; roller track 1350 mm length, 300 mm width

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used Ndedpfx Agjwu Hhdjzof for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsaw machine with double column guidance and 2° cutting inclination to the table support surface make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Ndodpfx Agsbw H T Dozef Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t Nedpefg E H Eofx Agzedf dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie Ndedpfx Aorl Irvegzof - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm Ndjdpowhqxmofx Agzef cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min feed length 750 mm multiple feeding length 6750 mm height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds Ndodpfx Agjd Iip Ajzjf • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm Ndodpswn Dy Dofx Agzef - Weight: approx. 1000 kg

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm Ndjdpfxsra Rrlj Agzsf 40 / 80 mt/min weight of the machine ca. 1050 kg

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t Ndsdpjfb Nbgsfx Agzjf dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic Horizontal – Two-column Guided Mitre Band Saw Machine Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, hydraulic automatic material feed Ndjdpfx Aowvrviegzef - Saw blade dimensions: 4400 x 34 x 0.9 mm - Infinitely variable cutting speed: 15 – 88 m/min - Infinitely variable cutting pressure adjustment: 10 – 15 bar - Lowering speed: 0 – 300 m/min - Cutting range 90°: - Round at 90°: 360 mm - Square-flat: 360 x 430 mm - Hydraulic material clamping - Hydraulic automatic material feed - Coolant system - Drive: 400 V / 3 kW - Space requirement approx.: W 2200 x H 1850 x D 1300 mm - Weight approx.: 1100 kg - Roller table: 2000 mm

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed Ndedpfx Agsupw R Aozef with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation Njdpfxefg E Hwj Agzedf • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. Nedpfx Aofg E Hyogzsdf - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Njdpfxsfg E H De Agzjdf Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, 310 mm 310 mm 340 x 310 mm saw band length 3730 x 34 x 1,1 mm table height 922 mm band speed 15 - 100 m/min total power requirement 3,0 kW weight of the machine ca. 1,65 t dimensions 1950x1755 m 2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities Nsdpfx Ajvn Uy Ajgzedf • Inclination of the saw frame for maximum service life of the saw band • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Nodsfu Nbbepfx Agzsdf Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min Ndodpofm T Hbefx Agzof total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm Njdpfx Agjfgyifozodf band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Ndsdpfjfg E Hzsx Agzof + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel Ndodpfx Aged Iipzezjf • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! Njdexfwbtepfx Agzodf 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)