Used Horizontal Bandsaw Machine for sale (65,581)

Condition: new, capacity 90 degrees: round 115 mm capacity 90 degrees: flat 100 x 150 mm band saw dimensions 1638 x 13 x 0,65 mm Fodpfx Akoyy A Rfovjgb 20/29/50 m/min

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 Fgsdpfx Akoxcux Revjb - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 Fgsdohy Nnbepfx Akvsb INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- Fgedohpktvepfx Akvsb The machine is delivered fully assembled and ready for immediate use.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg Fjdpfehpktrex Akvjgb dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. Fgjdpfx Aefg E H Iskvob CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm Fgedpofgyh Nsfx Akveb capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: like new (used), Year of construction: 2021, nominal power (apparent): 87 kVA, input voltage: 380 V, type of input current: three-phase, JTEKT H630SX-i CNC Machining Center — Japan Made For sale: JTEKT H630SX-i CNC machining center, manufactured by JTEKT Corporation, Japan. The machine is suitable for high-precision machining, milling, drilling, boring, and industrial production applications. Technical Details: Manufacturer: JTEKT Corporation Model: H630SX-i Machine Type: CNC Machining Center Machine No.: NS--5894 Origin: Japan Supply Voltage: AC 380 V Phase: 3 Phase Frequency: 50 Hz Full Load Current: 135 A Power Supply Capacity: 87 kVA Hydraulic Pump Pressure: 5.5 MPa Hydraulic Tank Capacity: 18 L CE Marked Fodsy Rfgkopfx Akvegb The machine is available for inspection. Photos, videos, and further technical information can be shared upon request.

Year of construction: 1994, condition: good (used), In good technical condition Year of manufacture: 1994 Travel of the column on the bed (X-axis): 9,000 mm Travel of the spindle head (Y-axis): 5,000 mm Quill travel (Z-axis): 1,600 mm Spindle stroke (W-axis): 1,250 mm Spindle + W and Z axes – 2,850 mm Boring spindle diameter: 225 mm Taper in spindle: ISO 60 Spindle cross-section: 520 x 520 mm Fsdpjy Hgvljfx Akvsgb Main motor power: 90 kW

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840 D total power requirement --- kW weight of the machine ca. 19,0 t Fgjdpfjyb S H Rex Akvob dimensions of the machine ca. --- m

Condition: new, Year of construction: 2026, Horizontal packaging machine for pre-made bags, including an auger filler for powdery products and a linear weigher for granules or bulk materials. The auger filler and linear weigher are mounted on movable frames and can only be operated alternately; simultaneous filling of the bag is not possible. Suitable for pre-made flat bags, doypacks, block-bottom/flat-bottom bags. Tools and modules for specific bag features such as zip/pressure seals, twist-off closures (spouts), gusset shapes, batch/date printers and gas-flushing modules can be integrated for extra charge. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Horizontal packaging machine specifications: max. speed of the machine in neutral: 12 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air pressure: 0.65 MPa; compressed air consumption: 0.2 m³/min; power supply: 220V, single-phase; power consumption: 1kW; housing: 304 stainless steel; machine dimensions: approx. L1754xW510xH1617mm. - Auger filler specifications: max. speed of the machine in neutral: 50 cycles/minute; dosing range: 50-100g (further ranges available on request); hopper capacity: 50 litres; accuracy: ±1.5%; hopper with side opening; housing: 304 stainless steel; parts in contact with the product: 304 stainless steel and acrylic (viewing window); PLC-controlled; dosing screw driven by a servo motor; power supply: 220V, single-phase. - Linear weigher specifications: max. speed of the machine in neutral: 60 cycles/minute; number of weighing heads: 4; capacity per weighing container: 0.5L; weighing range: 10-150g (further ranges available on request); accuracy: 0.2-1g; parts in contact with the product: 304 stainless steel; plastic dust cover; operation via touchscreen; power supply: 220V, single-phase. Included are 2 movable racks made of 304 stainless steel, as well as an output conveyor belt for transporting the finished bags. The photo shows only the horizontal packaging machine. Further photos available on request. Fgodpfx Aksv Nll Eovob

Condition: used, Year of construction: 2013, operating hours: 5,045,526,670 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, nominal power (apparent): 67 kVA, torque: 236 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,700 kg, spindle speed (max.): 10,000 rpm, coolant supply: 40 bar, spindle motor power: 42,000 W, spindle nose: HSK-A 63, number of slots in tool magazine: 180, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this used DMG MORI DMC 65 H duoBLOCK horizontal machining center, year of manufacture 2013. Model: DMC 65 H duoBLOCK Control: Siemens 840D solutionline Operate Serial number: 11710004283 Year of manufacture: 2013 Max. spindle speed: 10,000 rpm Weight: 9,700 kg Connected load: 67 kVA Max. input current: 97 A Rated current: 125 A Nominal voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V Additional options: Spindle: HSK-A 63, 42 kW / 236 Nm Taper cleaning station Fgodpfoy E E N Uex Akvjb Tool magazine: chain type, 180 positions Tool breakage control Coolant system 980 liters, paper band filter, internal coolant supply 40 bar Blow air also through spindle Rotary pallet magazine including 12 machine pallets (4x 630x500 mm; 8x 500x500 mm) Power-on hours: 50,688 Spindle hours: 26,688 The machine can be inspected under power. If you have any questions or need more information, please feel free to send us a message.

Condition: like new (used), Year of construction: 2022, Fully automatic straightening center for bandsaws we are selling it after little use because we had a generational change in the company and in the course of this, converted the entire machine park to Iseli. Previously we had the predecessor model for many years and were very satisfied. In one setup, automatic and uncompromising machining of all bandsaw blades Leveling, tensioning, back straightening, maintaining rest period Evenly processed bandsaw blades Better cutting speed, reduced cutting loss Less specialist staff, better quality in the sharpening room Technical data: Connection values: Electrical: 400 V 50 Hz or special voltages Compressed air: 1/4″ gas thread Air pressure: minimum 5 bar, 0.7 liter per stroke Saw blade dimension: Blade width: 60 mm to 305 mm / 60 mm to 381 mm, special up to 420 mm Blade length: from 4200 mm Processing time: Saw blade 206 mm x 10 m approx. 30 min Leveling tolerance: 0.02 mm - 0.03 mm Tension tolerance: 0.02 mm compared to the calculated tension curve or the stored optimum curves Tension: all desired tension profiles adjustable Control: PLC control Dimensions: Length without deflection: 2200 mm Height: 1540 mm Width: 1115 mm Working height: 1110 mm Fgsdpjwrx Rrefx Akvob Weight: 1120 kg The machine can be inspected on site!

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Fjdpfx Aewu Rgqjkvogb Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Year of construction: 1984, condition: ready for operation (used), A Dixi high-precision boring machine is available. Table dimensions X/Y: 840mm/1000mm, rotary table dimensions X/Y: 800mm/800mm, max. table load: 2000kg, feed rate: 10m/min, rapid traverse: 10m/min, table rotation speed: 1500°/min, spindle power: 11kW, speed: 3000rpm, tool holder: ISO50, measuring system resolution: +/-0.001mm, positioning accuracy: 0.001mm, travel X/Y/Z: 1000mm/1000mm/1000mm, spindle flange-table distance range: 390mm-1390mm. Machine dimensions X/Y/Z: approx. 4850mm/2700mm/3200mm, weight: approx. 17000kg, control: Dixi CNC 4400. Documentation available. An on-site inspection is possible. Fjdpfxjy Eg Daj Akvsgb

Condition: used, Year of construction: 2000, cutting diameter 260 mm saw band length 3800 x 27(25) x 0,9 mm cutting width 400 x 260 mm cutting speed 20 - 90 m/min total power requirement 1,85 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,8 x 1,6 x 1,5 m Semi-automatic miter band saw - Miter cutting +/- 60 degrees - Coolant system - Emergency stop Fsdjy D A Ewepfx Akvsgb

Condition: like new (used), Year of construction: 2005, operating hours: 8,883 h, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, feed length X-axis: 1,400 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 1,200 mm, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 18i-MB (MAPPS2), total height: 3,920 mm, total length: 9,200 mm, total width: 4,900 mm, table width: 800 mm, table length: 800 mm, rotational speed (min.): 10,000 rpm, overall weight: 32,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2005 CNC controller: Fanuc 18 imb (MAPPS2) Axes X-axis travel mm: 1400 Y-axis travel mm: 1200 Z-axis travel mm: 1200 B-axis degrees: 360º (0,001) Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 800x800 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 35/25 (40%ED/cont) Tool system Tool holder: BT 50 Tool magazine slots: 140 Equipment Chip conveyor Internal cooling lubricant supply High pressure pump Machine running times Under power: 25378 Spindle Working: 8883 Fodpfx Aksyxnypovsgb Basic machine dimensions / weight Length mm: 9200 Width mm: 4900 Height mm: 3920 Weight kg: 32000

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens Fedpfx Ajy D A Rgskvsgb • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant • Tool probe • Workpiece probe • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production • Currently machining aerospace components • Test possible by appointment If you have any questions or need further information, please feel free to send us a message or call.

Condition: ready for operation (used), functionality: fully functional, Euromac Digibend 360 Capacity: 36 tons Stroke: 250 mm Tooling optional, available upon request If you have any questions, please feel free to contact us. Fodpfx Aey Ducnekvjgb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp Fgedpfx Akjyxm Ireveb B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Fjdpfx Asxxvtuokvogb Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL Fsdpexw Syusfx Akvogb # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Machine Condition: Operational

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator Fsdsxw R Udjpfx Akvjgb # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described. Fodpfoxxrnbex Akvegb

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: Fgsdpfx Ajxxrc Sjkvob - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system