Used Hydraulic Test Bench for sale (27,679)

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Dodpfx Aozizmzshhjkw Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Dkedpszizrkofx Ahhow Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Djdjzizr Rspfx Ahhjkw Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear Dkodpfezlrqvex Ahhsw 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, DÜRR Djdpfoz Nflyex Ahhokw DÜRR testing station for adhesive applicators DÜRR testing station for adhesive applicators, including (5 robot-controlled adhesive applicators) DÜRR testing station (DÜRR in-house design) for the automotive industry Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data; information provided is without guarantee!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Dedpfez Nhp Isx Ahhokw

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Dsdpez N Dpkefx Ahhokw

Condition: used, D+P FLC300.3-D+P Industrial Electronics, Used Used industrial component from Dosier- und Prüftechnik GmbH, model FLC300.3-D+P. Manufacturer: Dosier- und Prüftechnik GmbH Model: FLC300.3-D+P Condition: Used Operating voltage: 24 V DC Dkodpfxjz N Hhpe Ahhsw Function: Control, monitoring, and testing technology for industrial applications Quantity: 2

Condition: excellent (used), Year of construction: 2005, Technical specifications: Djdpfx Ahe Afby Rshjkw Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Hydraulic folding bearing Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Dedpfx Asza Dv Ijhhjkw Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. If you have any further questions, please do not hesitate to ask. Dkjdpfx Asz A Amgshhow

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal Dkedpfxez Hd R Io Ahhow

Condition: used, Weiss Dkjdpszh D Rmjfx Ahhsw Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Dksdozh Htwjpfx Ahhjw Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Liebisch Type: S 1000 A-TR / 42016211 Chamber-type test equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type test equipment of type A-TR. The device's internal control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range humidity S: up to / 70°C Control range test chamber K: up to / 50°C Control range test chamber S: up to / 50°C Frequency: 50/60 Hz Djdpfx Aszh Ht Rshhokw Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Reservoir for test solution: approx. / 150 liters Test solution consumption / hour: approx. / 0.7 – 1.0 liters Water filling, base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz Dkedpfxjzrytlj Ahhsw

Condition: excellent (used), Year of construction: 1999, Imal hydraulic plate shear, type CCOSI 40/8 working width 4050 mm sheet thickness max. 8 mm Delem CNC control, type DP 10 Djdpfsz Nx Nrex Ahhekw automatic shear gap adjustment automatic angle adjustment controlled back gauge equipped with a front conveyor belt

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Dksdpfjz Iqh Asx Ahhow Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Dkjdpfx Aez Iqigjhhsw Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Parallel vise: height adjustable, jaw width 180 x 30 mm -Wingspan: 235 mm -Dimensions: 540/230/H590 mm -Weight: 38 kg Dkedpfoz Hxa Rox Ahhjw

Condition: excellent (used), For sale: a set of Hurst hydraulic rescue tools. - Hydraulic cutters. - Spreader. Dkedpfx Ahjz Sky Aehjw - Hydraulic pump.

Condition: good (used), For sale: heavy-duty transport trolley with hydraulically adjustable height. Price stated is for one unit. Dedpfsz Sk Rnsx Ahhekw

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. Dksdpfx Ae Aba Irehhow • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: new, Hydraulic cylinder with a 200 mm diameter piston, 90 mm rod diameter and 310 mm working stroke. D230x200S90x0CU310. Steel. Dkjds Afdtyepfx Ahhjw

Condition: used, Komac Hydraulic Hammer CW05 = More information = Suitable for: Construction machinery Please contact Miguel Cubas for further information. Dkjdpfx Ajxnq Nvjhhsw = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.