Used Hydromat 1000 for sale (11,276)

Condition: used, Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: for open-fronted storage bins, double-sided -Both sides: 90 boxes / total 180 boxes Ledpfx Agor Htnrszshr -Swivel castors: with parking brake -Dimensions: 1000/500/H1690 mm -Weight: 70 kg

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm Lhedpsd Ih Ncefx Agzor diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, Year of construction: 2016, weight max. in kg 1000 kg fork length 1150 mm stroke height 800 mm weight of the machine ca. 145 kg Electric scissor lift pallet truck from Rapid Lhsdpfx Aeu S R Dmjgzor Type: REE.1000 Year of manufacture: 2016 Condition: used, in working order Note: without charging station and without battery!

Condition: used, Year of construction: 2001, sheet thickness steel (max.): 6 mm, back gauge: 500 mm, cutting length (max.): 1,000 mm, Hydraulic Guillotine Shear Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Technical Specifications Lodpfxsv I T N Ns Agzshr Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Usable Length: 1000 mm Sheet Thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Features • Manual backgauge 500 mm • Angle stop All information is subject to change. A demonstration is available at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Lhedjww I Tmspfx Agzsr

Condition: good (used), Year of construction: 2020, 1 x Riggs auto pack 1000 product pump. Y.O.M 2020. Model Number:- TT2716. Located Wiltshire Ledevm U S Nopfx Agzehr

Condition: used, Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable Ljdpjrxgw Ajfx Agzjhr -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Weight: 64 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, turning diameter: 430 mm, travel distance X-axis: 275 mm, travel distance Z-axis: 1,070 mm, swing diameter over bed slide: 680 mm, Version with driven tools TECHNICAL DETAILS Spindle bore: 92 mm Bar diameter: 80 mm X-axis: 275 mm Z-axis: 1,070 mm Lsdjwtraijpfx Agzjhr Turning length: 1,000 mm Turning diameter: 430 mm Swing diameter over bed: 680 mm Number of tool stations: 12 (driven) MACHINE DETAILS Three-jaw chuck: RÖHM D 315 mm Control: Heidenhain Pilot 3190 EQUIPMENT - Hydraulic clamping cylinder

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 365 mm, turning diameter over bed slide: 570 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, controller model: NUM 1062, No minimum price - guaranteed sale to the highest bid! Condition: Mechanically very good, old tube monitor defective TECHNICAL DETAILS Turning length: 1,000 mm Spindle speed: 3 - 2,500 rpm Machining diameter: 570 mm Swing diameter (max.): 570 mm Turning diameter (max.): 365 mm Workpiece length max.: 1,000 mm Number of cross slides: 1 Spindle diameter: 62 mm Feed Z: 0 - 10,000 mm/min Feed X: 0 - 5,000 mm/min Tool holder: Chisel holder Quill mount: MK 5 MACHINE DETAILS Control: NUM 1062 Connected load: 35 kVA Connection voltage: 400 V Mains frequency: 50 Hz Overall height: 1,800 mm Lhsdpfx Aswqgqkogzsr Total weight: 4,000 kg Space requirement length: 3,400 mm Space requirement width: 1,900 mm EQUIPMENT - 3-jaw chuck - Various soft jaws - Tailstock

Condition: good (used), Type FEr LD 180/600/1000 100% operational, automatic rotation Ledpfx Asuhtmijgzehr

Condition: new, Year of construction: 2019, machine/vehicle number: 3813, overall weight: 600 kg, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, workpiece diameter (max.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaches) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal Broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External Broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 units, 14 mm wide, parallel/perpendicular to the mounting surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine cover for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LxWxH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Y/Δ 50 Hz Connected load: 12 kVA Max. fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Ledpfew Evkisx Agzshr Broaching Tool Holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please submit inquiries only via email. All information is provided to the best of our knowledge. Subject to errors. This offer is directed exclusively at businesses as defined by § 14 BGB. Sale is made without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations or for any injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the headings "Imprint", "General Terms and Conditions", and "Data Protection".

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 0368, Main data Swing diameter: 280 mm Grinding length: 1,000 mm Longitudinal slide Table swivel range: ± 7° 30' Table speed: 0.05 – 7 mm/min Infeed Infeed path for rough plunge grinding: 1.5 mm/Ø Infeed path for fine plunge grinding: 0.15 mm/Ø Automatic rough infeed speed: 0.1 – 4 m/min Automatic fine infeed speed: 0.015 – 1 m/min Grinding spindle headstock Max. grinding wheel (D × W × d): 400 × 40 × 127 mm Max. grinding wheel speed: 2,560 rpm Lhsdpfx Aoww Ig Hogzor Grinding wheel diameter: 250 mm Max. grinding wheel swivel range: ±45° Adjustment travel: 265 mm Tailstock Quill taper: MK4 Tailstock quill travel: 25 mm Workpiece headstock Workpiece spindle taper: MK4 Swivel range: ± 90° Max. number of steps: 12 MACHINE DETAILS Dimensions: approx. 2,100 x 2,000 x 1,500

Condition: used, Year of construction: 2009, clamping plate, welding table, welding table, surface plate Lododz Tdxspfx Agzjhr -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Lhsdpfxed Ebp Eo Agzjr -Width: 1000 mm -Depth: 500 mm -Height: 1000 mm -Shelves: 1 -with: doors -Weight: 86 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate Lhodpsndzxuefx Agzsr -Clamping plate: solid design -Clamping area: 1550 x 1000 mm -Table height: 730 mm -Plate thickness: 130 mm -Transport dimensions.: 1550/1000/H730 mm -Weight: 1550kg

Condition: good (used), Clamping plate, welding table, surface plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and final welding with T-slot system - Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Width: 1000 mm -Depth: 1400 mm -Height: 1300 mm Lhedsb A Iqajpfx Agzor

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Ledpfx Aeb Ta Nrsgzehr -Table width: 800 mm -Table length: 1000 mm -Table thickness: 35 mm -Table height: 765 mm -Plate: Solid cast steel -Groove width: 22 mm -Groove spacing: 100 mm -Plates bottom: Ring T-slot Ø 700 mm M12 -Equipment: with bench vice -Overall dimensions: 1300/1050/H1000 mm -Weight: 472 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm -Groove spacing: 125 mm Lodpfx Asgvm D Hogzohr -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: Directional plate with support ribs, solid version with base frame -Clamping surface: 1000 x 1000 mm Lhedpfxsrxgv Ej Agzor -Table height: 970 mm -Transport dimensions: 1020/1010/H970 mm -Weight: 426 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Lhsdpfxshtn Sfe Agzjr -Clamping angle: for workpiece clamping -Table surface: 1667 x 1000 mm, height 1400 mm -Wall thickness: 45 mm -T grooves: groove width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Condition: used, Stacking boxes, stacking boxes, steel boxes, Euro stacking boxes, , Euro stacking containers, Euro stacking containers, transport and stacking containers, material boxes, rubbish containers -Manufacturer: Schäfer, metal container material box stackable -Material: galvanized steel -Number: 14x Container available Lsdpfsldk Iyex Agzehr -Price per piece -Dimensions: 1000/520/H615 mm -Weight: 39 kg/pc.

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100 mm -Length: 800/1000 mm -Height: 825 mm -Thread: M24 -with stand: 200 mm wide -Number: 4x milling support available -Price: complete Lhedpfecn Rd Ejx Agzor -Weight: 2566 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm Ledpob D I D Njfx Agzohr -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes Lhsdpfx Agob Hix Uozsr -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate Lhedocm Tvcepfx Agzer -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg