Used Igo 18 for sale (10,891)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H45 mm Dwsdpfxsr U Sdus Ai Ejd -Total weight: 0,8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing Dodpfx Aier U Sd Us Ejwd -Overall dimensions: 60/55/H45 mm -Total weight: 0.9 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing Dwedpfx Aijr U Sf Ds Eod -Total dimensions: 65/55/H45 mm -Total weight: 0,8 kg

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar Dedpsrr Efrefx Ai Eewd manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht

Condition: used, feed pressure / bar Dodpfx Aiswz Ry Dj Eowd liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, mileage: 589,583 km, power: 155 kW (210.74 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 6,130 kg, maximum load weight: 1,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, tail-lift, traction control, * German vehicle * Condition: see photos * Body type: refrigerated van * Carrier Xarios 600 freezer unit * Temperature range: -20°C to +18°C * Diesel and electric drive Dwjdpfxow Dd Aqs Ai Eed * Very flat evaporator for optimal loading * Load area: Length 6.00 m, Width 2.45 m, Height 2.20 m * Side door of the refrigerated van on the right * Lashing rails on the left and right * Aluminum load floor with DIN lashing eyes * Tail lift, BÄR brand * Max. load capacity: 1000 kg * Foot switch * Roll-away protection * Air conditioning * Automatic transmission * Multifunction steering wheel * Cruise control * Lane keeping assist * Hill start assist * Cab with 2 seats * Air-suspended driver's comfort seat * Seat heating * Electrically adjustable and heated mirrors * ABS/ASR/ESP * Electric windows * Sunroof * Work lights * Radio CD * Differential lock * Daytime running lights * Leaf/air suspension + raise/lower function * Wheelbase: 4,200 mm * GVWR: 7,490 kg * Unladen weight: 6,130 kg * Payload: 1,360 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm Dwsdpfxjupbd Hj Ai Ejd -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg

Condition: good (used), Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm Dsdpfx Aewb Aknoi Eewd -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor with frequency converter -Type: SK 12-71 L/4 TF TR1 i= 72.63 -Speed: 18 rpm -Engine: Nord type SK 71 L/4 TF TR1 0.37 kW Dwodjv R Uqaspfx Ai Esd -Frequency converter: Nordac Trio SK 370/1 TR -Shaft: Ø 25 x 50 mm -Dimensions: 440/200/H315 mm -Weight: 21.6 kg

Condition: used, Year of construction: 1985, 1985 | Langendorf SATÜ 18/18 Fully Refurbished | Used Low Bed Semi-trailer 📍Location: Austria 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 9 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Freshly renovated, not used after repair. 📄 Want to see the full inspection, extra photos, or a video? Dodpfozrltwsx Ai Ejwd Tip: The reference "39629 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2024, operating hours: 444 h, machine/vehicle number: 52011230855510, load capacity: 320 kg, overall weight: 8,200 kg, fuel type: diesel, product width (max.): 2,350 mm, working height: 18,110 mm, enginetype: Diesel, manufacturer: Magni Dsdpfx Ajzqcarji Eewd

Condition: used, mileage: 155,000 km, power: 235 kW (319.51 HP), first registration: 01/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has aroused your interest, and we assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! NEXT GENERATION / NEW MODEL / TOP !!!!! STEERING AXLE SAFEServer body with 4-row rear cargo securing system NEW TARPAULIN WITH DIGITAL PRINTING POSSIBLE (at an extra charge) AIR CONDITIONING NAVIGATION TAIL LIFT 2,000 KG 2 X TOW HITCH Transmission * Opticruise automatic transmission, 2 pedals, 8 gears Assistance Systems * Electronic Braking System EBS * Adaptive Cruise Control ACC * Automatic Headlight Control * Rear View Camera * Hill Start Assist Lights and Visibility * H7 headlights * Headlight range adjustment * Fog lights * Tinted glass * LED daytime running lights Audio & Communication * Navigation system * Radio * Bluetooth hands-free system Exterior * Air suspension * Axle configuration: 6x2?4 * Rear-mounted aluminum loading platform: BÄR BC2000 S4-C4 * Steerable lift axle * Fifth wheel coupling * Leveling system * Sunroof * Roof spoiler * Electrically adjustable and heated exterior mirrors * Differential lock * Wind deflectors * Axle load indicator * Connection plug 1x15-pin * Speed limiter Safety * Electronic Stability Program ESP * Anti-Slip Regulation ASR * Anti-lock Braking System ABS * Outside temperature display * Electrically adjustable curb mirror * Wide-angle mirror * Immobilizer * Telematics system Interior * Digital tachograph * On-board computer * Sun visor * Cooler box Dwedpfjzqxulox Ai Ejd Comfort * Automatic climate control * Auxiliary heater * Driver's seat with air suspension * Seat heating * Adjustable steering column * Electric windows * Central locking Other Equipment * SCR K+G tec sliding tarpaulin panel body L x W x H Dimensions approx. 7,350 x 2,480 x 2,080 mm Cargo Area * Length 7,350 mm, Width 2,480 mm, Height 2,080 mm * Volume 37 m³ Tire Sizes * 1st axle 355/50 R22.5 * 2nd axle: 2nd axle 295/60 R22.5, dual tires * 3rd axle 295/60 R22.5 Other Dimensions and Weights * Payload: 15,305 kg * Permissible total weight: 26,000 kg * Fuel tank: 300l * AdBlue tank: 47l * Wheelbase: 4,750 mm GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV/HU / UVV tail lift / LGS inspection / Tachograph test / Installation of OBU device and service by our BRANDED WORKSHOP on site TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the Internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr. Equipment: Tail lift * Air suspension * Navigation system * Auxiliary heater Speed regulation: Cruise control Air conditioning: Air conditioning Hydraulic system: None Safety: ABS * EBS

Condition: used, Pastochef Range Electrical power Dwjdpfx Aiszx Un Rj Eed Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Dodpezyndbsfx Ai Eswd Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,670 h, load capacity: 1,800 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Refurbished, no warranty Technical condition: good Front tire condition: New Rear tire condition: New Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Hawker Battery type: PzS Djdpfx Aiez Alxzs Ejwd Battery year of manufacture: 2008 Battery condition: 40 - 60% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Please feel free to browse our website at fleischmann-foerdertechnik. We will be happy to provide you with a quote for leasing and financing, as well as delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded as of the date of listing. Subject to prior sale, changes, and errors.

Condition: used, Year of construction: 2019, operating hours: 1,610 h, Equipment: all wheel drive, Stock no. 5804 Neuson ET 18 mini excavator with quick-change system and 18 hp Yanmar engine / 40-size bucket ----* Manufacturer: Neuson * Type: ET 18 * Year of manufacture: 2019 * Weight: 1,987 kg * Color: Yellow * Enclosed cabin * kW / hp: 13.4 kW / 18 hp * Dozer blade extension * Hydraulic undercarriage * Second cabin door * Recorded operating hours: approx. 1,610 hours * 4 x LED work lights * Quick-change system Dwsdpfxez Am Rrj Ai Eod * 40-size bucket * Additional hydraulic connections for grapple * Yanmar diesel engine * Overall height approx. 2.85 m * Overall width approx. 0.99 m * Transport length approx. 3.85 m Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the specifications. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,985 h, load capacity: 1,800 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 140/55 - 9, overall weight: 3,669 kg, total height: 2,850 mm, total length: 1,950 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, LINDE E 18-02 EVO / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.650 mm Closed height: 2.850 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah v. 2018 Charger: 48 V 70 A not tested Tyres: Superelastik 200/50 - 10 %) Service weight: 3.669 kg Length: 1.950 mm Width: 1.200 mm Year of manufacture: 2018 Operating hours: 3.985 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1308893 Location: 14974 Ludwigsfelde bei Berlin Djdpfx Ajz Apu Hsi Eswd Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,030 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,470 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, motor manufacturer: VW, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,200 kg, total height: 2,140 mm, total length: 2,150 mm, total width: 1,150 mm, fuel: liquid petroleum gas (LPG), LINDE H 18 T - 01 EVO – LPG forklifts TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.625 mm Closed height: 2.140 mm Free lift: 1.470 mm Mast: Triplex (3F462) Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 200/50 - 10 (70%) / 18 x 7 - 8 (70%) Service weight: 3.200 kg Length: 2.150 mm Width: 1.150 mm Year of manufacture: 2019 Operating hours: 10.030 h Condition: working condition Dsdpez Aqcrsfx Ai Eowd EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights Internal no.: 1202067 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Power converter, power supply, power supply unit, switching power supply, power supply device, built-in power supply unit Dedpfx Aohzzccoi Ejwd Manufacturer: Siemens, built-in power supply system SVS2 -Type: E24 G5/ 18 WRG -Order No.: 6EV 3053-OCC -Technical data: see nameplates and photos -Dimensions: 200/60/H245 mm -Weight: 1.9 kg

Condition: used, machine/vehicle number: 331, empty load weight: 2,700 kg, maximum load weight: 15,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2012, suspension: air, tire size: 385/65 r 22,5, color: black, Equipment: ABS, * Disc brake * EBS * BPW axles Dwodpfx Ajmcchusi Eed * Lifting and lowering device Errors excepted

Condition: good (used), Three-phase motor with 2 speeds, electric motor -Handover in its current condition as inspected -Foot: damaged, see photo Dwodod E Tx Dspfx Ai Esd -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons Djdpfx Aet Rl U Sji Eewd -Tensioning bracket: Fork clamping iron, various designs -Slot width: 15/18 mm (see photos) -Submission/Price: complete -Dimensions: 150/42/H26 mm 2 pcs / 200/50/30 mm 4 pcs / 200/49/30 mm 4 pcs -Transport dimensions: 200/190/H105 mm -Weight: 12.8 kg

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps -Solar fastener: End clamp Dwsdot Snvuopfx Ai Eed -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: Aluminum -Number: 500 terminals available Price: per piece -Minimum order quantity: 50 units -Dimensions: 50/45/H27 mm -Weight: 0.01 kg/pc.

Condition: used, Kortho Graphicjet X-18 Inkjet Printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced Hi-Res inkjet printer for prints up to 18mm high The X-Series Graphicjets, introduced in 2015, are Kortho's newest and most advanced Hi-Res inkjet printers. From a mechanical engineering perspective, the X-Series printers, with their capillary ink system, represent an evolution of our proven 18P model. However, the X-Series printers feature a Windows operating system. Furthermore, its NiceLabel Windows driver enables this printer to print directly from any Windows software or ERP system. The X-Series features an 8" color touchscreen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. In addition, this printer can print at a speed of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Printing area of 18 x 1000 mm Resolution of 185 DPI Printing speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Dodpfstpwt Isx Ai Eswd Prints on cardboard (boxes), paper, and many other absorbent materials A compact printhead housing and 60 cm supply cable ensure easy installation Its non-contact capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touchscreen in any language you desire Starts within seconds Extensive graphics, text, and barcode functions Windows-based operating system Equipped with a Windows driver for network integration Equipped with an Ethernet port as well as USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low running costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP systems CE certified More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Dodpfx Asvzdw Dei Eowd Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.