Used Ixion 30 for sale (37)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Fgsdpfxou Tln No Al Uoh Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm spindle stroke : 150 mm Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm Fjdpfxetwnv Tj Al Ujgh With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: excellent (used), Column drilling machine Fodpfey I Ug Usx Al Ujgh Manufacturer: Ixion Model: BS 30 AV STG Taper: MK 3 Infinitely variable speed: 80 - 1400 rpm Three automatic feeds: 0.1–0.2–0.3 per revolution Thread cutting function Throat: 280 mm Table size: 550 x 400 mm Max. distance: quill to table 750 mm Motor: 380 volt Transport dimensions: Height: 2050 mm with base plate Depth: 1000 mm Width: 560 mm Weight: 355 kg with pallet

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm Fgedpfx Asu Aq Amsl Ueh - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 3, total width: 600 mm, total length: 900 mm, total height: 1,900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, spindle stroke: 150 mm, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Fgodpfswy Ec Dox Al Uoh Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! € 2,350.00

Year of construction: 1992, condition: good (used), machine/vehicle number: 144202, Technical data: - Drilling capacity in steel ST 60: 32 mm - Thread cutting capability up to: M 20 - Drill spindle mount: MK 3 - Feed rates: 0.1 + 0.2 + 0.3 mm/rev - Drill spindle stroke: 150 mm - 12 drill spindle speeds: 80 - 1400 rpm - Overhang: 280 mm - Max. distance table - drill spindle: 760 mm - Table with 2 T-slots: 550 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.4 / 2.3 kW - Space requirement: approx. W 550 x H 1950 x D 850 mm - Weight: approx. 360 kg Fjdpfxjgbykre Al Usgh - Includes: - Coolant system - Quick-change drill chuck - 20 pcs. HSS various drills, 8 - 25 mm

Condition: used, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 36.0 mm throat 280 mm bore stroke 150 mm turning speeds 80 - 1400 U/min table-size 400 x 550 mm morse taper MK 3 feed 0.1-0.2-0.3 mm/U total power requirement 1.1 / 2.0 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: ?machineno=1008-9103736 Fedpfsxabv Dsx Al Usgh

Condition: good (used), Year of construction: 2003, bench drill, pillar drill, column drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel distance: 210 mm -Spindle mount: Drill chuck B16 (1-13 mm) -Protrusion: 180 mm -Speeds: 420 - 2100 rpm continuously variable -Column: Diameter 65 mm -Spindle stroke: 70 mm, with fine stop Fgodpfjk Tuwvex Al Ush -Motor: AEG 0.7/1.0 kW -Voltage: 380 V -Dimensions: 620/235/H800 mm -Weight: 70 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: - Drilling capacity approx. 30 mm Fedpfxed Ingfe Al Uogh - Drill spindle mount MK 3 - Drill spindle speeds in 2 stages, stepless 80 - 1400 rpm - Table surface 390 x 420 mm - Drilling unit height-adjustable by hand crank - Min. / max. distance table / drill spindle 220 / 580 mm - Drill spindle stroke 150 mm - Drill spindle overhang 280 mm - Drive 400 V / 1.3 / 2.3 kW - Space requirement approx. W 480 x H 880 - H 1200 x D 1050 mm - Weight approx. 250 kg - Table base with storage space W 600 x H 910 x D 800 mm - Weight 200 kg

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Machine number 950-483 Fjdsz Nyz Njpfx Al Usgh Axis Travels and Rotary Table X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees

Condition: used, 1 unit of IXION BT 25 STPF drilling and milling machine with various accessories Color: as shown in the pictures, according to the images and upon inspection Fjdpfx Asz I Nkcjl Usgh Condition: used Location of the goods: workshop Payment method: prepayment via bank transfer Shipping: Self-collection only from the location in Bischofswiesen

Condition: ready for operation (used), Year of construction: 2000, Column drilling machine MAXION / IXION BS 25 ST - G -Well-maintained, good overall condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Threading device up to M20 -Spindle mount / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Overhang 260mm -Speed range / continuously variable 120-2160 rpm -Automatic feed -Work table size 500x365mm -Column diameter 110mm -Distance / spindle - table 90-760mm -Drive power 1.5 KW -Drill chuck Fgsdpfxsy Um Iws Al Ush Dimensions: L x W x H 0.8 x 0.5 x 2 meters / Weight 300kg Errors and omissions excepted.

Condition: used, bore capacity in steel (diameter) 15 mm throat 215 mm turning speeds 200 - 3600 U/min 350 x 300 mm total power requirement 1,0 kW / Volt tool taper MK 2 weight of the machine ca. 320 Kg dimensions 0,8 x 0,6 x 1,9 mm Fgodszpzb Sopfx Al Ueh Bench drill - Base unit with drawers

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm Fjdpfx Ajz Dtxcjl Uegh - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: repair required (used), Year of construction: 1996, For sale: an IXION deep-hole drilling machine, model Zyklen TL 601. Unfortunately, the machine is currently experiencing electrical problems. Constants need to be re-programmed by a technician, and the buffer battery needs to be replaced. A new LCD display was recently installed. Display: NEW LED Fodpfxsh Dpv Re Al Uogh Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel distances + Quill Tl 601 (Z) 600 mm + Drilling unit, vertical (Y) 300 mm + Table, transverse (Table surface 1200 mm x 600 mm) (X) 700 mm + In the drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + Holder SK 40 according to DIN + Draw bolt 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + at 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW + Spindle speed Directly programmable 100-4000 rpm Working performance: + Drilling capacity in steel 2312 D 32 mm + Thread cutting M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT. We can deliver and commission the machine. All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Tapping capacity up to M16 8 tapping chucks Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Fsdpfx Aljzdp U Ne Uegh Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping Fjdpszry H Sjfx Al Usgh - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) Fedpoy Rhzwefx Al Ujgh The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Fedpfxoq Dlzne Al Uogh Misc. Accessories Marcels Maschinen AG

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST Fgjdpfx Aloyfwune Uoh - incl. base cabinet

Condition: used, Year of construction: 2001, drilling diameter 18 min drilling capacity diameter max. 15 mm bore depth 90 mm throat 215 mm spindle bis 360 mm spindle 560 mm table plate 350 x 290 mm column diameter 75 mm Total height max. 1050 mm weight ca. 100 kg Fgjdsxbtraspfx Al Uoh spindle turning speed - stepless 100 - 1800 U/min motor speeds: 700 / 1400 U/min Pole-changing motor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Fgjdpfxjya U U Us Al Ujh Paper band filter Electronic handwheel Original documentation

Condition: good (used), Year of construction: 1974, machine/vehicle number: 571, Offer 25456 Technical Data: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - 8 spindle speeds: 100 – 1120 rpm - Table area: 400 x 400 mm - Drilling unit height adjustable via handwheel - Minimum / maximum distance table / drill-milling spindle: 300 / 600 mm Fsdpfxeyfn Nps Al Ujgh - Drilling spindle stroke: 120 mm - Drilling spindle outreach: 260 mm - Coolant system - Machine base cabinet with door - Drive: 400 V / 1.5 / 2.3 kW - Space requirements approx.: W 500 x H 1800 x D 950 mm - Weight approx.: 200 kg

Condition: used, bore capacity in steel (diameter) 15 mm throat 220 mm bore stroke 80 mm 2 speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg dimensions 700 x 600 x 1500 mm Fodpfx Aleyf N Erj Uogh Features: - Microdosing - Thread cutting M2-10

Condition: ready for operation (used), Ixion BT 23 FST Pillar Drilling Machine / Drill Press Speed range: 120 - 1080 rpm / 240 - 2160 rpm Spindle taper: MT 3 Quill stroke: 120 mm Drilling capacity (steel): 23 mm Throat depth: 260 mm Dimensions: approx. 1000 mm x 1000 mm x 1950 mm Weight: approx. 430 kg You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net (tax-free) invoice, provided a valid VAT ID is supplied. Fsdpoyybpgefx Al Uogh Subject to prior sale. Visit our shop and check out our other listings. Company names and trademarks mentioned are property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications as well as errors in the item description may occur and are subject to change.