Used Ixion Tl 1004 for sale (49)

Condition: good (used), Year of construction: 2001, Technical details are shown on picture. Fgedpfx Aoyuykdsa Aja Deep hole boring machine with many additional equipement.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Fodpfow Elrvox Aa Ajga Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC: HEIDENHAIN 530 Drilling diam.: diam. 32 mm Drilling length: 1000 mm X-axis travel: 2000 mm (table) Y-axis travel: 800 mm (vertical) Z-axis travel: 2000 mm (T-column) Table dimensions: 1500x1000 mm Table capacity: 7/10 ton Indexing angle: 360° Milling spindle: SK40 M30, 200 cm^3/min Motor power: 11 kW Rotation speed: 6000 rpm 24-place tool changer Overall dimensions: 5600x5000x3320(h) mm Pump 100 bar Fgedpfjvznyiex Aa Aoa

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm Fjdpfx Aaoh Dpv Re Aega + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Fgsdpsq Dlznjfx Aa Aea Misc. Accessories Marcels Maschinen AG

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: 430M, total width: 5,350 mm, total height: 4,020 mm, spindle motor power: 18,500 W, product length (max.): 5,150 mm, spindle speed (max.): 6,000 rpm, tool weight: 3,500 g, number of axes: 6, This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details. • Axes travels: • W (deep hole drilling/milling unit, horizontal): 1,200 mm • A (swiveling deep hole drilling/milling unit): +25° / -15° • B (NC rotary table): 360° • Rotary table: 1,000 x 1,000 mm, 5 T-slots • Max. workpiece weight: 7,000 kg • Max. torque: 115 Nm • Deep drilling capacity: • Max. depth (single pass): 1,200 mm • Diameter range: 3 – 25 mm (up to 36 mm with ELB in reinforced version) • High-pressure coolant system: 100 bar at 42 l/min (upgrade option 001b to 95 l/min) • Tool changer: 24 stations • Max. tool length: 300 mm • Max. tool diameter: 90 mm (160 mm with free adjacent pockets) Additional equipment • Full enclosure with roof • Oil mist extractor • Chip conveyor Fgodpoyzgvusfx Aa Aoa • 2 traveling steady rests • Deep drilling start package: tool holders and Botek Type 110 tools for various diameters Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Fgjdpeya U U Uefx Aa Aoa Paper band filter Electronic handwheel Original documentation

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Fgedpsydmuujfx Aa Aoa Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Fedpfew Izr Aox Aa Aoga Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: used, Used pillar drilling machine from Ixion speed range 400-3000 rpm Fodehcr I Eopfx Aa Asga Mk2 holder drilling capacity up to max. 18mm

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Fodpewywwyjfx Aa Asga Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 00127634, functionality: fully functional, High-speed bench drill, Made in Germany - Clamping table: 290 x 225 mm - Travel: 150 mm with hand crank - Spindle fitting: Drill chuck included - Drilling capacity in steel Ø 1 - 6 mm - Throat depth: 180 mm - Speeds: 900 - 10,000 rpm, 8 steps - Column: diameter 75 mm - Spindle stroke: 60 mm, with fine stop - Voltage: 380 V - Dimensions: 640/330/H740 mm - Weight: 92 kg Fedpfx Aasyx Dzpe Ajga

Condition: excellent (used), incl. rollable table 380 VAC Drilling capacity in steel: max. approx. Ø 18 mm Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Fedoryn Sbepfx Aa Asga Dimensions W x D x H: approx. 800 x 900 x 1740 mm

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm Fodpfx Aerz Nqaja Aoga weight: 280 kg

Condition: used, throat 215 mm thread M2 - M10 thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Total height 950 mm Fgedpsyv N Ddofx Aa Aea motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg

Condition: ready for operation (used), Ixion BT 23 FST Pillar Drilling Machine / Drill Press Speed range: 120 - 1080 rpm / 240 - 2160 rpm Spindle taper: MT 3 Quill stroke: 120 mm Drilling capacity (steel): 23 mm Throat depth: 260 mm Dimensions: approx. 1000 mm x 1000 mm x 1950 mm Weight: approx. 430 kg You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. Fsdpfeyybpgox Aa Aega For international customers, we can also provide a net (tax-free) invoice, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and check out our other listings. Company names and trademarks mentioned are property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications as well as errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2000, Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW Fsdpfx Aaeg Rplws Aoga -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm Fodpfx Aaek Tuwvj Asga -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Fgedpju Tln Nefx Aa Asa - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), functionality: fully functional, throat depth: 180 mm, overall weight: 65 kg, spindle speed (min.): 480 rpm, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Fgedjw Ug Dqepfx Aa Aea Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Fedpfx Aaeyn Snho Aoga Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: used, bore capacity in steel (diameter) 15 mm throat 220 mm Fedpfx Asyf N Ersa Asga bore stroke 80 mm 2 speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg dimensions 700 x 600 x 1500 mm Features: - Microdosing - Thread cutting M2-10

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm Fedpfx Asyfwunea Aega table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm Fgodpfx Aajtwnv Te Aea spindle stroke : 150 mm Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Fgodpfx Aoxp H Dxsa Asa Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test