Used Immersion Heater for sale (6,421)

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Applications: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating during the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat input: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Lrsdpfx Agexwkw Eovsn Height: 1300 mm Weight: 270 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Lrjdjuubctepfx Agvon Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: excellent (used), Motan DH-1 N-A/B instantaneous water heater, loadable You are buying a functional Motan instantaneous water heater. The device comes from Bundeswehr stocks and is in very good condition. Versatile in use, e.g. as a pool heater The bestseller for heating swimming pools in no time at all. A 100 m³ swimming pool heats up to 30 C in 3 hours. There is no quicker way to heat water. Perfect for use wherever there is no electricity. Tent camp, weekend house, building site, camping. Its effective output is infinitely variable from 40.5 kW to 128 kW. Despite its high output, the appliance is still portable at a weight of 130 kg. As the water temperature can be set anywhere between 30°C and 90°C, the appliance is can be set as required, the appliance is very versatile, e.g. as a hot water generator for camp showers, for hot water production. Also perfect for koi facilities and koi ponds. Lsdjulgh Njpfx Agvsrn Technical data: Output: 35000 kcal/h to 110000 kcal/h infinitely variable (40.5 kW to 128 kW) Largest water volume: approx. 3600 l/h of water at maximum heat output. At max. water flow, the temperature increase is approx. 30°C, i.e. at 10°C. Water flow temp. and 30°C Increase = 40°C Final temperature Drive: Petrol engine Fichtel & Sachs, Stamo 75 Displacement: 75 ccm Power: 2.5 hp at 4500 rpm Consumption: approx. 1.8 l/h mixture 1 : 25 (for the engine!) For the burner depending on the amount of water max.: 24l/h gasoline with max. flow rate of 3600 l/h Tank capacity: 5 liters Dimensions Width: 500 mm, length: 1040 mm, height: 850 mm Weight: approx. 130 kg Manufacturer's price: 8000,-€ You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Lsdpfxsqvmcpo Agvsrn Connected load 11.8 A Dimensions 54x29x80 cm Weight 15 kg

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Lrodpewtg Hdsfx Agvon

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Ledpfx Agjw Uk A Devorn

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Lodpfsygbbzsx Agvern

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm Lodpfx Aexv Akzegvjrn - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Lredpfx Agjx An Eqsvon

Year of construction: 1998, condition: excellent (used), Dryer Digicolor Lsdpfx Agoi T Hzzsvern Type: Heater Model: EH 15 AC - T Year of manufacture: 1998 Plus, vacuum equipment

Condition: excellent (used), functionality: fully functional, Electric water heater Lodpfxjvbfvhj Agvjrn Maximum power - 18kW

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning. Ljdpoxtc Rcjfx Agvern

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec GentleMACS Octo Dissociator with heaters. The gentleMACS Octo Dissociator with Heaters is a benchtop instrument for the fully automated and standardized tissue dissociation or homogenization of up to eight samples. Equipped with eight individual heating units and numerous optimized and ready-to-use gentleMACS Programs the gentleMACS Octo Dissociator with Heaters offers a fully automated workflow for tissue dissociation. In addition the instrument allows the user to create user-defined programs for almost any biological material. All eight positions can be operated independently. Single-cell suspensions or thorough homogenates are easily and reproducibly obtained using the unique C Tubes or M Tubes. These single-use gentleMACS Tubes allow sample preparation in a closed and sterile system, providing a high level of user safety and minimize cross-contamination. Lrodpet E Hncjfx Agvsn Applications The gentleMACS Octo Dissociator with Heaters is equipped with several programs for fully automated tissue dissociation into single-cell suspensions, including: - mouse or human tumor - mouse or rat neonatal heart - neural tissue - mouse spleen, lung, lamina propria, epidermis, or liver - mouse or rat skeletal muscle - and more Additionally, user-defined programs can be used to create fully automated workflows for all other tissue types. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar Lrodoglpywspfx Agvjn - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Lredpfx Aget Rh T Deven

Condition: new, Year of construction: 2023, Manufacturer: Source Technology Model: PowerHeater PH100-1 Year: 2023 Condition: New Serial number: 65800-41-45074 Ledoy Tmnbepfx Agvjrn Stock number: 3384 PowerHeater PH100-1 Capacity: 150 - 240 kg/h Steam: 50 - 100 kg/h, 10 bar Compressed air: 6 - 8 bar, 50 Nl/min Water: 16 bar, 1500 l/h Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 3000 x 1400 x 1800 mm Weight: 850 kg Klovborg conveyor belt Serial number: 220188-2 Power: 230VAC, 50Hz, 1Ph Dimensions: 1250 x 500 x 1450 mm Weight: 65 kg Source Technology trolley (2 units) Serial number: 65800-41-110562 / 66400-33-110562 Working load: 250 kg Dimensions: 1500 x 1400 x 1950 mm Weight: 95 kg With Kito CX003 hand hoist

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Lsdpeu Eb A Nefx Agvsrn Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, power: 66 kW (89.73 HP), Year of construction: 2022, operating hours: 212 h, maximum speed: 20 km/h, Operating hours: 212_____Max. lifting capacity 2,500 kg Max. lift height 4,800 mm Max. outreach 2,600 mm Length to attachment carrier 3,320 mm Width 1,540 mm Height 1,975 mm Total weight with forks 5,120 kg Total weight without forks 4,950 kg Motor: Electric - emission-free Power 66 kW (90 HP) Maximum speed 20 km/h Lead-acid battery 48 V Nominal capacity 960 Ah Cab: semi-open cabin ROPS/FOPS Heated seat Sunblind Roof window wiper Digital display 4x1 joystick, electronic, with capacitive release including direction switch Telescopic boom, 2-piece Attachment carrier: quick-change carrier type ZM2S Steering: rear-wheel steering Drive: permanent all-wheel drive Brake system: negative electrohydraulic parking brake Regenerative braking system Oil-immersed brakes at the front Hydraulics: load sensing variable displacement pump Working hydraulics flow: 42 l/min Working pressure: 210 bar Flow-sharing control block Electrics: charging voltage 220 / 400 V Charging time at 220 V - 9 hours Max. operating time - 8 hours (depending on application) Tyres: AS 504 10.0/75-15.3 18 PR Standard equipment: Gravity lowering of telescopic boom 2 hydraulic connections at boom head Lighting for road use LED work lights on cab (2 front, 2 rear) Automatic battery disconnect switch Acoustic reverse travel alarm Support for lifting cylinder safety Inspection certificate for 20 km/h operating approval External wallbox charger 16 A - 400 V Optional equipment: Upper door section in glass (for enclosed cabin) Cab heater Heated front windscreen Lrjdpfxstxgqlo Agven 31x15.5-15" 12 PR TR315 BKT, AS tread (vehicle width increases to 1.70 m) Location: Rhöner Landtechnik G

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General: -Temperature range, max. 90°C water -Robust steel sheet housing -Unit on rollers Hydraulics: -Submersible pump (manufacturer: Speck) with pressure/vacuum function (leak stop operation) -Qmax. 60 l/min. -Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity 12 liters -Fittings made of brass/stainless steel -Automatic water refill -Electronic level control -Indirect cooling system (plate heat exchanger) -Cooling capacity ~40,000 kcal/h (10 plates) -Display manometer -Integrated bypass -Solenoid valves for cooling and refill Electrical and control: -Electronic, self-optimizing PCB control -Electronic flow measurement -Control voltage within the unit: 24 V AC -Acoustic and visual alarm indicator -Solid state relay -Safety thermostat Ljdpfjd Aathjx Agvjrn -Sensor break monitoring -Monitoring of hose rupture and leakage -Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: excellent (used), For sale: Julabo FC1600 laboratory chiller with a circulating pump (closed-loop system). Included is a copper spiral immersion probe (ideal for cooling tanks, fermentation, distillation, etc.). The equipment is in working order, and its condition can be seen in the photos. Temperature range: -20..+80°C Stability: +/-0.2°C Cooling capacity: approx. 1.6 kW Heater power: 1.2 kW Pump flow rate: 20 l/min, 0.5 bar Lrjdpfozb Ixcox Agvjn System volume: 8-11 l Power supply: 230V

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) Lrodpfx Agjw Hcdlsvon with two 2.5" heating water connections with DN 180 flange for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Lredpfxefzk Ewo Agvjn materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Lodjfz Dtzepfx Agvern In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm Ljdpjyyvvhsfx Agvsrn o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Useful capacity: 3,000 litres Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Sonde de température PT100 : Jacket   Empty weight : 2000 kg Lodpjyvv A Tsfx Agvorn Dimension : Ø 1563 x 4831 mm Central drain DN63   Motor checked and tested prior to sale. Drawing available on request