Used In Mould Label for sale (17,124)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 66,160 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 679 cm³, Injection unit: Screw diameter 60 mm Ls/D ratio 21 Injection pressure 2000 bar Stroke volume 679 ccm Shot weight (PS) 618 gr. Injection rate 325 ccm/s Screw speed 259 1/min Plasticising rate max. 58 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Fgodpfey Nk Uqjx Akvob - 10-fold water flow regulator Additional Options: - 1 x Air valve - 3 x Core pulls - 4 x hotrunner controllers - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Fgsdpey Nk Taofx Akveb Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Fedpfxjy N Uwcj Akvogb

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 18, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, 1 x Opel Movano minibus/school bus and 1 x Fiat Ducato (identical to Fiat Ducato) / Multiple coaches available for immediate delivery Stock vehicle / Warehouse vehicle available for immediate delivery Fiat Ducato: 1 unit available. Various equipment lines Conversion details: - Acoustic and thermal insulation in the passenger compartment - Grey/black glazing in original cutouts - 16 sleeper seats plus front passenger single seat + driver's seat = 18 total - Optional: Front passenger seat or cashier table can be installed next to the driver's seat - Convector heating in the passenger compartment - Air conditioning in the passenger compartment, optionally with a second compressor - Multi-stage night lighting white / orange - Roof hatch - Electric drive on original sliding door - Electric step on original sliding door - Reinforced rear axle Options: Custom orders possible: Fiat Ducato, Citroen Jumper, Peugeot Boxer, or Opel Movano. Various equipment lines in stock. - Electric center door +2,000.00 EUR - Double-width center door +3,000.00 EUR (loses 1 seat position) - 5 standing places - Automatic transmission - 180 HP Base vehicle with air conditioning, manual transmission, PDC with reversing camera, radio with hands-free system, multifunction steering wheel, ... Wheelbase 4035 mm Overall length 6223 mm Height 2522 mm Width 2050 mm Permitted gross weight 4250 kg!! Special features: Driver and passenger airbags, Cool & Sound package, Electrical interface for additional conversions, Driver assistance system: park pilot with reversing camera, Light package 1, Tire repair kit, Adjustable single front passenger seat, Heated driver’s seat Additional features: Exterior mirrors, single rear wheels on 2nd/rear axle, driver assistance: crosswind assist, generator 185 A, rear wing doors with glazing (180° opening), high roof H2, permissible gross weight 4.25 t, high-volume box body, body length L4, high roof variant (H2), 80 l fuel tank, adjustable steering column, headlight range adjustment, model update, 2.3L – 103 kW CDTI engine, pollen filter, long wheelbase, low emissions as per Euro 6e-TEMP, right-side sliding door for cargo/passenger compartment, side marker lights, visibility package, steel rims 6.5x16, LED daytime running lights, gross weight 4.25 t, speed limitation 90 km/h Net export possible All details without guarantee These are German vehicles, not reimports. Custom orders also possible for Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipment worldwide Fgsdpfxoy Rg Dde Akvjb

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Category: Demo Lowered height: 2400 mm Fsdpfxjy I Uiij Akvegb Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Operating hours: 454 hours Battery capacity: 24V / 775Ah Options: DEMO!! MINI forklift – order picker – counterbalance stacker (3 in 1!!) – Dual steering - Triplex – FFL mast - Side shift & spreader - Tilting fork carriage - Rated capacity at 5400 mm = 1500 kg - Spotlights - 2 x BlueSpot - with cantilever forks - SUITABLE for all types of pallets - POWER STEERING - Fully LIKE NEW!!

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Fsdpsw E E Evsfx Akvegb Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Fgsdsy N Ddxopfx Akveb

Condition: ready for operation (used), Year of construction: 2018, A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible. Fodpfx Asy N Dd Eekvjgb

Condition: ready for operation (used), Year of construction: 2017, A Gernep self-adhesive labeling machine is available. Nominal capacity: 2500bottles/h, running direction: RM, throughput capacity control range: 800-3000bottles/h, container format 1 diameter/height: 66mm/280mm, container format 2 diameter/height: 85mm/316mm, container volume 1/2: 500ml/1000ml, label dimensions X/Y: 160mm/17mm, label application: U-seal, conveyor height: 1000mm. Including self-adhesive dispenser unit and swing-top closure alignment. Documentation vorhanden. An on-site inspection is possible. Fgjdpfx Akjy N Ddrevsb

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Fjdsy N Dd Sepfx Akvjgb

Condition: ready for operation (used), Year of construction: 2021, A Gernep cold glue labeling machine that has been used in the brewery industry is available. Rated capacity: 5000bottles/h, direction of operation: LM, control range: 1000-6000bottles/h, glue application height: 330mm, bottle material: glass, bottle volume: 330ml/500ml, min. label length range: 25mm-130mm, max. label height: 130mm, max. label height lower edge/upper edge: 15mm/320mm, application: swing-top label/body label. Including cold glue unit, prepared wet glue unit, date coding, height adjustment, overload clutch, infeed and outfeed tunnel and foot extension with floor plate. Documentation available. An on-site inspection is possible. Expected to be available from the end of May 2026. Fedpey N Dfiofx Akvegb

Condition: ready for operation (used), Year of construction: 2020, A cold-glue labeling machine Gernep, which was used in the food industry, is available. Nominal output: 10000bottles/h, running direction: LM, control range: 2000-12000bottles/h, gluing height 1/2: 330mm/230mm, bottle format height 1/2: 307mm/260mm, bottle format diameter 1/2: 90mm/68mm, bottle material: glass, bottle type: VDF/NRW, bottle volume: 1000ml/500ml, application: body label/neck label/back label, container condition: hot. Cold-glue format 1: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/320mm. Cold-glue format 2: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/220mm. Including two cold-glue units, dating, sensor label inspection, breakage detection, overload clutch, additional accumulation switch and center slide. Documentation available. An on-site inspection is possible. Fgedpoy N Dfpsfx Akveb

Condition: ready for operation (used), Year of construction: 2011, A Gernep cold glue and self-adhesive labeling machine for spirits is available. Nominal capacity: 12000bottles/h, direction of operation: RM, control range: 3000-18000bottles/h, bottle format volume: 700ml/750ml/1000ml, bottle material: glass. Including two cold glue units, two self-adhesive dispensers, cold glue unit height adjustment, diameter adjustment slide, breakage detection, bottle counter, side cam alignment, dating unit and Etima neck ring preparation. Documentation available. An on-site inspection is possible. Fsdsy N Dfcopfx Akvjgb

Year of construction: 2003, condition: ready for operation (used), Automatic labeler with vacuumbelt Al-tech model Alline Build 2003 Fgsdpfxoinh Ths Akveb posibillity for 1 or 2 labels or wrap arround max container size 100mm max label height 150mm machine is tested and in good working order video on request by whats-app

Condition: used, Year of construction: 1990, functionality: fully functional, total width: 1,000 mm, total length: 2,300 mm, total height: 1,750 mm, type of input current: three-phase, label length: 500 mm, input voltage: 400 V, Horizontal roll trough labeler for cans hot melt pick up with cold end glue-ing up to 153mm diameter label length from 240 to 500mm Capacity up to 8.000can/hr depending on label size dimensions 2300x1000x1750 LxWxH Fgedpfx Aker Izigevjb Frame: Steel Electric : 380 Volt - 50 Hz - 1,75 kW Press air : 6 bar Features: on / off switch with thermal overload protection Adjustable label storage roll on unit

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total width: 1,100 mm, total length: 3,200 mm, total height: 1,900 mm, type of input current: three-phase, label length: 250 mm, overall weight: 350 kg, year of last overhaul: 2013, power: 1.5 kW (2.04 HP), Make: Langguth Type: E20 Stainlessteel frame Capacity: Up to 6,000 BPH (depending on label-length) Range: Diameter 60 to 99mm Label length 80 to 250mm Dimensions: L x W x H = 3200 x 1100 x 1900 mm Weight: 400 kg Power-supply: 400 Volt - 50 Hz Tooling: Including tooling for one (1) label size Features: Control panel with operating elements Adjustable label-magazine (Height and width) Safety housing machine was completely rbuild in 2012 with stainlessteel frame Glue heating 160mm hight glue roll Fgedpor Ixrrefx Akvjb minimum used. excellent condition

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,600 mm, total length: 4,400 mm, total height: 1,540 mm, type of input current: three-phase, Labeling machine for round containers, spot or wrap around. 1 label station, max label height 130mm. Roll-on unit 80mm height. Push plate 120mm height. Machine is tested and in working order. Fedpsxnk Ifsfx Akvjgb

Year of construction: 2001, condition: like new (used), Etipack Model: SIST.1 FLEXO (EMC DX head) Fgedsfzknvspfx Akvjb Direction:Left-Right Type: Labeller for self-adhesive labels Serial: A1A357R1-1 Build: 2001 Dimensions: L x W x H = 2,600 x 1,400 x 1,250 mm conveyor length 2,600 mm Coveyor wide 110 mm (Welt) Press on belt 90 mm high Weight: 400 Kg Electric 230 Volt - 50 Hz - 200 Watt Features: Machine suitable for round and conic wraparround machine technicly checked conveyor frequency driven

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Fedey Hglgopfx Akvsgb Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Fgodpfx Ajymn R Nokvob Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Year of construction: 2005, condition: ready for operation (used), Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible. Fodpjy Nnadofx Akvogb

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Hersteller: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Fjdsxzq Skjpfx Akvogb Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 2,500 bar, overall weight: 1,800 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Fgjdeyt R S Aepfx Akvsb terms of payment: 100% prior to delivery

Year of construction: 2019, condition: used, machine/vehicle number: V71CY2019087772, Clamping force: 4,000 kN, clear column spacing: 840 mm, centering flange diameter: 125 mm, 1 temperature control unit Fjdpfxjy D Txue Akvjgb

Year of construction: 2018, operating hours: 32,946 h, condition: used, machine/vehicle number: 21702113, Clamping force: 4,600 kN, clear column spacing: 810 mm, centering flange diameter: 110 mm, 1 temperature control unit Fgjdpfey D Txnsx Akvsb