Used Indexation Table for sale (17,583)

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Ibedefv Aykspfx Ap Dec Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. Iodpfxofv Ayys Ap Dobc - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm Ibjdsfv Ay Sopfx Ap Doc max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t Ibedpefv Azhofx Ap Dsc swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. Ibodsfh Uw Ropfx Ap Dec

Condition: new, table length 1300 mm table width 800 mm Ibsdpfx Apefrzt Aj Dec stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Ibjdpfsftd T Sjx Ap Djc Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface Ibedjd Rawzspfx Ap Doc hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 2400 mm table width 1200 mm Ijdpfx Aod Raw Asp Dsbc table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Price excludes packaging and shipping.

Condition: new, table length 2900 mm table width 1200 mm Isdpfx Apsd Iinae Dobc table height 900 mm table load 3000 Kg weight of the machine ca. 0,77 t dimensions 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. Iedsd Iincjpfx Ap Djbc height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1400 mm table width 1400 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,5 t dimensions 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm Ijdped Iindsfx Ap Dobc The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: used, Heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry/Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds 2500/3000/4200 rpm Miter stop with length compensation Ibedjz D Szcepfx Ap Djc Saw blade up to 550 mm diameter Electrically adjustable lifting and tilting of the saw blade with digital display Machine from retirement sale / first delivery in 2011 Machine has been WORKSHOP-TESTED and is in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Isdpfjz Eh Nrox Ap Debc Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm Isdpfx Ajz Euuzop Debc W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence Iedpfez Ig Nijx Ap Djbc The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.

Condition: excellent (used), Horizontal/vertical rotary table Iodpfx Ajz I A I Uop Dsbc Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: good (used), Altendorf WA8 sliding table saw Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Iedsznw Dyspfx Ap Dobc Good condition, fully functional.

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Ibsdpfjyhdb Hex Ap Doc Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Assembly table, workbench with tilting mechanism, from 0° (horizontal) to 85°. Length 2900 mm Depth (height) 1600 mm Overall height of the table in the vertical position 2000 mm Roller conveyor length 2000 mm Width 160 mm Two pneumatic main cylinders for tilting Two foot pedals Ijdpfez Nm Dwsx Ap Dobc Four pneumatic short-stroke lifting cylinders at the rear

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Iodpfszqyxxsx Ap Dobc Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: good (used), Corpus lifting and alignment device Belt conveyor table with lifting and alignment device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm You can find more new and used items in our shop! International shipping costs available upon request! Iodpfx Aovdcmvop Debc

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 10 U/min swivelling range 90 Grad Ibedpfx Asvn Uy Nop Dsc tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 15 Kg dimensions of the machine ca. 400 x 400 x 400 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Ibedpfxeu Utwbe Ap Doc Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° Ibjdpfx Asu Nkm Esp Dsc weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *