Used Inspection Machine for sale (89,034)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW Iodpfx Aajxxar Usajtp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Isdpfxoxxklfj Aaajtp Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser source model: TruFlow 4000, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 900 kg, TRUMPF laser cutting machine with LiftMaster! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Accuracy Smallest programmable increment: 0.001 mm Position deviation Pa: ±0.1 mm Mean position scatter Ps: ±0.03 mm Workpiece Maximum workpiece weight: 900 kg Maximum speeds Parallel to axis: 100 m/min Isdpfx Ajxwn S Hoaaotp Simultaneous, approx.: 140 m/min MACHINE DETAILS Laser: TruFlow 4000 Controller: Siemens Machine weight: 13,000 kg EQUIPMENT LiftMaster

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² Itodexvx U Aspfx Aaasp MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Itedjxxih Ejpfx Aaaep Protective lenses

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm Itjdpjxwcyfofx Aaaep MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Iedpfsxxal Ijx Aaajtp Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW Itjdpjxurtijfx Aaasp DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dimensions of the control cabinet: 1,000 x 480 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 6,537 h, laser source model: TruFlow 3200, laser power: 3,200 W, table length: 3,000 mm, table width: 1,500 mm, table height: 2,200 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Itedpfx Aoxxt E Uoaajp Table height: 2,200 mm Laser power: 3,200 W MACHINE DETAILS Control: Siemens Laser model: TruFlow 3200 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours Beam on: 6,537 h Laser on: 39,930 h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 9972, total length: 4,500 mm, total width: 2,000 mm, type of input current: three-phase, year of last overhaul: 2020, empty load weight: 3,000 kg, Equipment: documentation/manual, The machine was last overhauled in 2020 at a cost of over EUR 70,000!\n\nMACHINE DETAILS\n\nType of incoming power: Three-phase current\nCompressed air connection: 6 bar\nInput frequency: 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 4,500 x 2,000 x 2,200 mm\nTotal weight: 3,000 kg\n\nEQUIPMENT\nDocumentation/Manual Iedpfjxximhjx Aaajtp

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Iedexxiuxopfx Aaastp Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece length (max.): 5,600 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 600 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 2,100 mm Iedpsxw U U Uefx Aaaetp Max. workpiece length: 5,600 mm Max. workpiece height: 600 mm

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, number of print heads: 5, delivery head: 950 mm, product height (max.): 19 mm, product length (max.): 1,600 mm, product width (max.): 1,200 mm, Digital printing machine in clean room! TECHNICAL DETAILS Product dimensions Max. product dimensions: 1,600 x 1,200 mm Min. product dimensions: 300 x 300 mm Product thickness: 3–19 mm Conveyor height: 950 mm Printing speed: 80 m²/h MACHINE DETAILS Number of print heads: 5 Clean room dimensions External length: 10,500 mm External width: 3,800 mm Internal length: 10,340 mm Internal width: 3,640 mm Weight: 2,500 kg Electrical data Itodpfoxuhz Aox Aaajp Power supply: 400 VAC / 32 A Installed power: 10 kW Compressed air Compressed air connection: 6.0 bar Air consumption: 50 l/min EQUIPMENT 1 infeed conveyor 3 outfeed conveyors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, working width: 4,060 mm, sheet thickness (max.): 2 mm, empty load weight: 5,500 kg, stroke length: 300 mm, TECHNICAL DETAILS Sheet width: 4,060 mm Sheet thickness: 2.5 mm Stroke: 300 mm Backgauge length: 10 - 1,550 mm MACHINE DETAILS Itedpfx Aasxxrmqjajp Total power requirement: 3 kW Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Itjdpfx Ajxw U Syeaaop Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 62 mm, column diameter: 350 mm, drilling depth: 315 mm, rotational speed (max.): 2,000 rpm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 62 mm Thread cutting in steel (St 60): M46 Thread cutting in grey cast iron (GG 20): M52 Maximum drilling depth: 315 mm Machine table dimensions: 2,400 x 1,000 x 200 mm Throat: 1,600 mm Drill head travel (horizontal): 1,250 mm Iodpfx Ajxxrcxsaastp Arm stroke (vertical): 585 mm Column diameter: 350 mm Speed range: 38 – 2,000 rpm Spindle taper: MK 5 Feeds: 0.06 – 1 mm/rev MACHINE DETAILS Total power requirement: 5.5 kW Dimensions & Weight Space requirement: approx. 2,490 x 1,050 x 2,780 mm Machine weight: approx. 3,800 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad Iodpfx Aexw U Eaoaajtp MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 60 mm, spindle speed (max.): 1,450 rpm, spindle stroke: 350 mm, workpiece height (max.): 1,300 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 60 mm Arm reach: 1,600 mm Workpiece height – max. approx.: 1,300 mm Reaming diameter in steel: 80 mm Reaming diameter in cast iron: 100 mm Thread cutting in ST 60: M55 mm Ijdpfjxxrbnox Aaastp Spindle speed: 29–1,450 rpm Drill spindle: 100 mm Morse taper: MK5 Spindle stroke: 350 mm MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,600 x 1,100 x 3,200 mm Machine weight approx.: 4,600 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm Itjdpfxexw U Ars Aaasp MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, empty load weight: 5,500 kg, TECHNICAL DETAILS Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Total power requirement: 8 kW Iedpfoxxrakjx Aaaetp Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Isdpfexw T Tpex Aaaetp Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Itedpfx Aaexw T H Njaep Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Iedpfxjxw Tugo Aaaotp TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Iodpsxw Ttvjfx Aaaotp Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Iodpfx Aaoxw Tngoaotp Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking