Used Irmer Mona Compressor for sale (3,709)

Condition: excellent (used), Year of construction: 1997, PROD. KAESER TYPE CS91 S/N 7601345 YEAR 1997 POWER (kW) 55 Lhedpfoz D Ud Hex Akqsn CAPACITY (m3/min) 9.55 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 14215 / 71583 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no NEW/USED USED

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: Lhodpswq Sz Isfx Akqon - Focus Control 2.0 control system - Network pressure sensor - Belt-driven drive system - Soundproofed

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series Ledpfsxaahxjx Akqehn ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 108 kg, power: 55 kW (74.78 HP), fuel type: electric, Danfoss SH1804ABE 44.5KW refrigeration compressor for sale R410 manufacturer: Danfoss year of manufacture: 2016 type: SH180B4ABE Lhjdsyhpl Djpfx Akqjn Compressor type Hermetically sealed scroll Mode Medium temperature (MBP), High temperature (HBP) Refrigerant Freon R410A Cooling capacity EN12900 44500 W Volumetric productivity 29.6 m3/h Compression volume 170.2 cm3 Power supply 3 phase / 380-420 V / 50 Hz Power factor 3.21 Maximum operating current 27.0 A Inrush current 170.0 A Oil volume 6700 cm3 Pressure line connection 28.6 mm Suction line connection 41.28 mm Dimensions 317.5 × 317.5 × 682.5 mm Weight 108.0 kg Displacement, cm3/rev: 170.2 Power supply: 380-400V/3 phases/50Hz Cooling capacity, kW, R410A, ARI air conditioning (To=+7.2C, Tk=+54.4C, SH=11.1K, SC=8.3K): 44.5 Oil charge (l): 6.7 Net weight (kg): 108

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Lodpfsyhpqtox Akqjhn Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 2x compressor available -Price: per piece Ljdpfxjyk Tg Ds Akqehn -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit

Condition: excellent (used), Year of construction: 2000, volume flow: 1.2 m³/h, KAESER AIRCENTER SM 11 screw compressor Motor 7.5 kW Capacity 1.20 m3/min. Pressure 7.5 bar THE COMPRESSOR IS FULLY OPERATIONAL. Lodpexn Atmefx Akqshn

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Lhjdpfxsy Udfmo Akqjn Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: excellent (used), Sullair ES-6 rotary screw compressor Technical details: Lhodpfezt Nw Asx Akqjn 7,5 kW 10 bar capacity 0,97 m3/min weight 150 kgs runned hours: 7011 recently serviced

Condition: used, 1,450 rpm, 28.7 kW at 2 bar, 580 m³ volumetric flow rate. Ledpfxjzr H Trs Akqshn

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 513 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Oil-free screw compressor, Atlas Copco ZT55VSD Inverter integrated Lsdpfx Akszwdt Tsqshn 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates Ledezu Aibspfx Akqohn as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. Lhodszvllnjpfx Akqsn TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Manufacturer: Atlas Copco Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ If you have any questions or require further information, please feel free to send us a message or call us. Ljdpfxszvmnqo Akqjhn

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated Ljdpozznqkofx Akqohn 132 kW 8.10 bar 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Lhedpezzp N Isfx Akqsn Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: good (used), Schneider Compressor 670-270 ST used, including refrigerant dryer Tank volume 270 liters Lodozzclpopfx Akqjhn Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 58,438 h, functionality: fully functional, power: 110 kW (149.56 HP), volume flow: 1,227.6 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor, Kaeser DSD202 Lhsdpfszna Rpjx Akqon 110 kW 8.5 bar 20.46 m3/min Year of manufacture: 2009 Operating hours: 58,438

Condition: used, Two-stage compressor Bitzer -Type: S6F-30.2 -Volume: 101.1 m3/h -Cooling capacity for R404A: 35.7 kW at -30°C/40°C, 25.3 kW at -40°C/40°C -Items in magazine: 2 Ljdezxy Uijpfx Akqohn -Reference number: S 256 -Condition: Used in very good condition, ready to work

Condition: used, Compressor DWM Copeland -Type: D8DH5-500X-AWM/D Ljdpfx Akszxzlpsqshn -Volume: 151 m3/h -Cooling capacity: 103.4 kW at -5°C/40°C, 85.3 kW at -10°C/40°C, 44.5 kW at -25°C/40°C -Refrigerant: R404A -Quantity in stock: 1 -Reference number: S 254 -Condition: Used in very good condition, ready to work

Condition: excellent (used), S014913 PROD. ATLAS COPCO TYPE GX18 S/N API441069 YEAR 2005 POWER (kW) 18.5 CAPACITY (m3/min) 2.64 Lodpfjz Dwb Iox Akqjhn PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 46443 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2018, S016947 PROD. ALUP TYPE ALLEGRO26 CE S/N ITJ210759 YEAR 2018 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) 47881 FREQUENCY CONVERTER yes BUILT-IN DRYER no Lsdpfxez E Rpbs Akqjhn EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Lhjdsz Dpt Ajpfx Akqon

Condition: used, Refrigerant compressors system DWM Copeland Lhodpfx Aez Hu Spjkqen -Type: D6DT5-320X-AWM/D (x4) -Volume: 126.9 m3/h (x4) -Cooling capacity: 280 kW at -10°C/40°C, 150.4 kW at -25°C/40°C, 92.8 kW at -35°C/40°C -Dimensions: 3600 x 1100 x 1950 mm -Items in magazine: 2 -Reference number: Z139 -Condition: Used in very good condition, ready to work

Condition: new, PROD. ATLASCOPCO TYPE G11FF S/N ITJ1078585 YEAR 2026 POWER (kW) 11 CAPACITY (m3/min) 1.51 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 Ledez Diqujpfx Akqshn INVERTER no BUILT-IN DRYER yes, R513a 0.5kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500 L DOCUMENTS yes CONNECTION 1 NEW/USED NEW