Used Jane Gear for sale (7,353)

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Axle 1: left 10 mm right 10 mm Lodpey N D Rlefx Agljrr Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, machine/vehicle number: XLWRT222079306537, fuel type: diesel, color: other, gearing type: automatic, Year of construction: 2007, operating hours: 21,826 h, Year of manufacture: May 2007 Axle 1: left 18 mm right 18 mm Lodpfxoy T H Ars Agljrr Axle 2: left 6-6 mm right 6-6 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Ljdey Enkbopfx Agljrr Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors Ljdszv Ed Dopfx Aglorr DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: used, Scale: 22 mm Technical data: - Mounting shaft: 5 mm Lodpezrxwcsfx Aglerr

Condition: used, As-new T-angle gearbox or bevel gearbox, Tandler Type O1-III, made of steel, with a gear ratio of 2:1 Lredezrxvropfx Agljr Technical data: - Manufacturer’s number: 151227 - Width: 222 mm - Height: 190 mm - Depth: 110 mm - Ratio: 2:1 - Teeth: 22 x 6

Condition: used, 18/4-7 Lrsdpszrxmwefx Aglor for Homag KL 37 DS edge-banding machine or similar

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Lrjdpfx Agsxwltheljr Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm Lrjdjxamghspfx Aglsr -Weight: 106 kg

Condition: used, Max. pitch dia. 250 mm (external spur) Max. pitch dia. 178 mm ((external helical) Max. pitch dia. 153 mm (Internal spur or helical) Max. face width 51 mm Max. helix angle 45 deg No of speed/range 156-515 strokes /min Cutting feed pr/stroke 0,006-0,0013 Equipped with: Lrodpfxoy Anwis Agler Various change gears

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm Lrodpfx Aezq Hmcjglsr total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Ledpfewrh H Nox Aglerr Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor Ljdpfx Agezn Nmajljrr -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 -Speed: 0-641 rpm -Engine: Type PF112 -Voltage: 160 V -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm -Weight: 19.5 kg

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Lrsdpfx Agjw Al U Ejlor

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Lrodpfsx Dm D Iex Agler

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Lrsdpfx Aowkih Eoglsr

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Lrjdpfx Aswfg E Degler

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Lsdpfx Aoxltu Njglsrr

Year of construction: 1991, condition: ready for operation (used), A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible. Lodoy Hk Tzepfx Aglsrr

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Lredezg Iq Ispfx Agler

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Lrjdpfx Aey Ax Theglsr

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Lrodjrgahxjpfx Agler

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Ljdpfxjy Hk T Ie Aglsrr

Condition: excellent (used), functionality: fully functional, Reishauer NRK change gears Original change gear set with substructure, including 50 ground change gears in the original wooden box. 26 loose change gears, including 2 with Z=63, 2 with Z=64, and 1 with Z=72 (original). All gears with ground teeth. The following accessories are also available: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (one incomplete) 9 new grinding wheel flanges Various new and unused grinding wheels Balancing mandrel Thread rolling device Roll grinding device Various cams/cam profiles Grinding device, manufacturer Landert Motoren Various oil nozzles Unused strip curtain/splash guard Lodpfx Aoza Dk Sjgljrr All technical specifications are subject to printing errors and omissions. Sale exclusively within EU countries.

Condition: excellent (used), max. wheel diameter 175 mm gear width 350 mm max. module 3 min. module 0,5 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,2 x 0,8 x 1,4 m Lrsdpfxeznnito Aglor