Used Jig Borer for sale (215)

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS Hjdpfoxp Na Nsx Ahasfh FULLY FUNCTIONAL GOOD SLIDES

Condition: used, Year of construction: 1975, Deckel LKS coordinate grinding machine from workshop liquidation. Function not tested. Hfsdpfx Ahoyhxcpoaoh

Condition: ready for operation (used), Year of construction: 1999, CNC die-sinking EDM machine Exeron type 303 with Andronic path control with manual control panel , Accessories : C-axis , 16-fold electrode changer , Hirschmann clamping system , fire extinguishing system , operating instructions. Hfjdpfeqabfdjx Ahajh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Hfjdpfx Ajvwa Nbshaeh The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: good (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 120 mm, For sale is a single-column coordinate grinding machine of the Hauser brand and type S3-DR. The machine is in good condition and fully functional Technical data Year of construction: 1990 Distance between column + spindle: 340mm Clearance between table + spindle: 500mm Diameter of the main spindle: 100mm Tool holder: 22S: E23 Tool holder: 45S/45ST: E19 Tool holder: 80S: F6 Tool holder: T10/T16: Ø3mm Adjustment range: X= 400mm, Y= 250mm Adjustment range: W= 450mm, Z= 120mm, U=6/20mm Table surface: 600x380mm Table load: max. 300kg Conical grinding: max. 16° Basic deviation X,Y at 20° C: 0.002mm Installed power: 7.5kW Compressed air requirement, suction capacity/h: 15m³ Required mains pressure: 6bar Spindle speeds in min -1 Grinding turbine: T10-100'000 Grinding turbine: T16-160'000 Nutenschleifapparat: 2‘900-34‘500 W-axis AC: approx. 900 Z-axis, hydraulic 15-7,500, DC drive 0.5-150 On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Hfodpfouy Tuasx Ahash Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1977, condition: used, x-travel 520 mm y-travel 400 mm z-travel 450 mm spindle taper ISO 40 control TNC 360 dimensions of the machine ca. 2450x2300x3300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Hedpfx Aoyutrbehasfh please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg Hfedefc R D Iopfx Ahaoh

Condition: used, Drill stand, drill stop, drill press stand, drill jig, drill bushing jig Hfedod Rh Rcepfx Ahash -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

Condition: used, Year of construction: 1968, Technical details: x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 ° grinding wheel stroke - vertical: 110 mm stroke speeds: 0 - 6 m/min grinding spindle speed: bis 50000 U/min peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m rotary table d = 300 mm frequency changer Hfedpfxjvbzwzs Ahash *

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Hodjx Rw E Sepfx Ahaefh Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 20369, table width: 400 mm, table length: 570 mm, controller model: POCON 60, empty load weight: 6,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Bidding obligates you to collect the item on time between December 1, 2025, and December 5, 2025! TECHNICAL DETAILS Table width: 400 mm Table length: 570 mm Magnet dimensions: 260 x 150 mm Control unit: POCON 60 MACHINE DETAILS Operating voltage: 400 V Hodpsxm Sf Njfx Ahaefh Frequency: 50 Hz Connection: 5 kVA Dimensions & Weight Dimensions: 3,500 x 3,000 x 2,600 mm Weight: 6,000 kg EQUIPMENT - 4 T-slots - Clamping system - Magnetic clamping plate - ZIMMER + KREIM electrode changer system - Electrode holder - 50-position electrode changer - Storage system with various clamping plates - 2 tool trolleys with suitable electrodes and clamping systems

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0103, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 635 mm, table length: 1,020 mm, table width: 860 mm, No reserve price – guaranteed sale to the highest bid! TECHNICAL DETAILS Worktable Table length: 1,020 mm Table width: 860 mm Max. workpiece weight: 800 kg Travel Longitudinal travel (X-axis): 900 mm Cross travel (Y-axis): 600 mm Vertical travel (Z-axis): 635 mm Spindle Spindle taper: ISO40 Quill feed (Z-axis): 200 mm Distance table to spindle: 15 – 850 mm Spindle speeds: 10 – 2,500 rpm Table feed rates: 5 – 5,000 mm/min Quill feed steps: 6 Quill feed per revolution: 0.03 mm/rev to 0.33 mm/rev Distance between columns: 950 mm Hjdpfewzxl Ujx Ahasfh Control: Heidenhain ITNC 320 MACHINE DETAILS Voltage: 50 Hz 3×380 V Connection: 50 Hz 3×380 V Spindle motor: 4.5 kW Power requirement: 10 kVA Dimensions & Weight Dimensions: 2,930×2,370×2,690 mm Weight: 6,500 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area Travel X: 400 mm Travel Y: 300 mm Travel Z: 300 mm Hsdpfxswzx E Ue Ahaefh Workpiece Max. workpiece size: 850 x 640 x 250 mm Max. workpiece weight: 700 kg Max. electrode weight: 50 kg Table dimensions: 700 x 500 mm C-axis: 152.5 – 452.5 mm Max. dielectric fluid level: 300 mm Filtration System Tank capacity: 400 L Filter particle size: 3 / 2 µm Control Controller: EA12V Input method: Keyboard, USB flash drive, Ethernet TFT monitor: 15" touchscreen / CNC Min. command increment: 0.1 µm Min. axis resolution: 0.1 µm MACHINE DETAILS Electrical Data Voltage: 400 V – 3 Ph – 50/60 Hz Dimensions & Weight Dimensions: 2,145 x 2,050 x 2,380 mm Weight: 3,725 kg EQUIPMENT Power supply unit: Pulse generator Cooling method: fully sealed, indirect air cooling

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t Hedpfx Aed Amgkohasfh PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Year of construction: 1985, condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm table width 860 mm taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Hfedpfot Hwyxsx Ahajh Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Hodpfx Aot Hw S Uehaefh Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. Hedpfet Hw Txox Ahaefh U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: Hedpfot Hxcnjx Ahaofh • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: defective spare-parts repository (used), Year of construction: 1999, X - Axis 400 mm Y - Axis 300 mm Z - Axis 300 mm Clamping area 600 x 400 mm Hfjdpfx Ahsxlnm Toajh Max. electrode weight 100 kg Electrode changer 20 positions

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes Hfsdpfxen Arnxs Ahaeh TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, SIP 600 – Precision Coordinate Boring Machine Accuracy Positioning accuracy on X and Y axes over the entire travel: 0.003 mm Capacity Table travel (X axis): 1000 mm Slide travel (Y axis): 700 mm Vertical quill travel: 300 mm Vertical crossrail travel: 780 mm Distance between uprights: approx. 1100 mm Max. distance spindle nose to table: 1000 mm Table Usable table surface: 1100 × 842 mm Maximum load capacity: 1500 kg Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Slide (Carriage) Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Spindle and Hydrostatic Quill Spindle speed: 40 – 2000 rpm (18 speeds) Automatic boring feeds: 0.04 – 0.35 mm/rev Tool taper: Morse 4 – SIP 4e Spindle motor power: 5.9 kW (8 HP) Hydrostatic quill diameter: 135 mm Functions: Automatic tool clamping Automatic depth stop Spindle rotation direction reversal Speed preselection Machining Assist Unit X and Y axis display: 0.001 mm Z axis display: 0.01 mm Memory capacity: 999 sequences Automatic movements: X and Y / Simultaneous XY Programmable increments: 0.002 / 0.009 / 0.1 / 1 mm Power Supply Electrical supply: 50 Hz – 380 V 60 Hz – 440 V Compressed air: 6 – 10 bar (11 l/min) Machine Dimensions Machine footprint: 2870 × 3480 mm Footprint with cabinet: 3870 × 4000 mm Total height: 3235 mm Weight Hjdpfx Aeyt Rrpohajfh Net machine weight: 10,000 kg Machine weight with cabinet and accessories: 11,000 kg

Condition: used, Table size 1600 x 1450 mm Spindle dia 125 mm Spindle speeds 3,4-700 rpm Spindle taper MT 5 Movements: (X) column left/right 3500 mm Hjdpjx Iiknsfx Ahasfh (Y) support vertical 1550 mm (Z) Table to/from spindle 1350 mm (W) spindle movement 900 mm (B) Table rotating 360 deg. Equipped with: 2 axis dro Various tool holders (see photo)

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Hfodpfxow Ig A He Ahaoh Errors, typos and prior sale excepted.

Condition: used, Year of construction: 2011, Sinks (see attached images) Gantry Eagle 500 Year of manufacture: 2011 Travel paths: x/y/z = 525x400x450 Tool changer: 24 positions Weight: 5000 kg Hfodpfxew D Hcgs Ahaoh

Condition: as good as new (ex-display), Year of construction: 2006, operating hours: 985 h, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 455 mm, workpiece weight (max.): 3,000 kg, EDM314MF30 - SLM (second-life machine) Complete retrofit in 2026 Travel paths X x Y x Z: 900 x 705 x 455 mm Machine table: 1150 x 850 mm Tank size: 1200 x 900 mm Distance table/chuck: 260/710 mm Electrode weight: 50/500 kg Max. workpiece weight: 3000 kg Overall machine dimensions: 2210 x 3450 x 3250 mm Power connection: 400V/DS/50/60Hz Tank height: 750 mm Features: Completely new electrics New control cabinet New generator New controller MF30 operating interface Movable control panel Touchscreen display Lifting speed 15000 mm/min (Highjump) Erosion generator 60A Integrated chiller Cartridge filter system Hsdpfx Ahshfaizjaofh Tool changer: 8-position/20-position/30-position C-axis with direct measurement, resolution 0.0001 degrees C-axis as positioning, rotary, and erosion axis C-axis 100 RPM Automatic tank tracking New fill, filter, and flushing pump Transport IB Training 12 months warranty