Used Joos Plastic Press for sale (22)

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: Hedpfxex Enr So Aftsfr - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm - ABS safety system, can be deactivated - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric Hfsdsx Edl Ejpfx Aftjr heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: good (used), Year of construction: 1975, Veneer press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5500 kg - Electrically heated platen, no dents - HP 120 Hfodpfx Afex Akuzjter - Press area height: 400 mm - 6 cylinders - Rack and pinion guide

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% Hfjdpoxplbcsfx Aftsr - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: used, functionality: fully functional, total width: 1,200 mm, total length: 2,500 mm, total height: 1,900 mm, type of input current: three-phase, transport width: 1,350 mm, space requirement length: 3,270 mm, transport height: 1,900 mm, Hydraulic cold platen press, brand JOOS, number of cylinders: 6 Hedpfx Asx E Ullsftefr

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Hjdpfx Aexnqq Hsftsfr Safety device: emergency stop rope Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1855680, pressing force: 80 t, input frequency: 50 Hz, power: 4 kW (5.44 HP), table length: 1,400 mm, table width: 800 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Year of Manufacture: 2004 Pressing Power: 800 kN Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Hjdpfx Afsrp D Eajtsfr Previously used in a company setting, reliable and durable. Despite the dust, this Hydraulic Press continues to deliver reliable performance. Contact us today to arrange a viewing or to inquire further information.

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Hodpfx Ajwpm I Hsftofr Location: Röllbach

Condition: ready for operation (used), IM Very good condition. Hfsdsxgnxrepfx After

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Hfodpst Eq E Sjfx After Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 800 kN Setting range 10 – 100 % Hfedpfxefhqhdj Aftsr Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 265 bar Daylight height 400 mm Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Hodpfoww Nd Hex Aftjfr Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Shelf length 250 cm Width 130 cm Four hydraulic cylinders For water Hsdpfx Aexgnp Doftofr

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Hsdpfxjfhqhae Aftefr Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Hfodpfx Aewrtlqefter Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel Hedpfekuz T Uox Aftjfr mechanical safety door data collection

Condition: as good as new (ex-display), - pressing force: 700 kN - pressing surface: 2500 x 1250 mm - medium heated (water) with heating unit Hfsdpswaznefx Aftjr max. temperature 85 °C - incl. Joos-A.B.S.-Safety-System to protect the heating platens in case of incorrect loading or forgotten parts

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, installation height: 200 mm, stroke length: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Hfodpfxjvzwxus Aftor Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Condition: as good as new (ex-display), Technical specifications: Working surface 2800 x 1300 mm Maximum mould height 600 mm Vacuum pump 40 m³/h Vacuum vessel 2 x 200 l Membrane Rubber Configuration: - Oil free rotary valve vacuum pump (sub frame) - Vacuum vessel for fast vacuum ejection (sub frame) - Clamped membrane - Double frame for membrane clamping - Separate rubber sealing strip - Water proof robust working plate with cross milling - Vacuum height adjustable by means of electronic switch Control: Hfodpfxjb Awz He Aftsr The operating elements are integrated into the switch cabinet. The switch cabinet is installed into the base frame, including cable and 16 Amp. Cekon plug.

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar Hsdpfxs T R Nhe Aftofr goldclour anodized heating platens, tooth rack guidance

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 Hfodpfx As T Sv Sefter For tempering thermoplastic materials such as mineral plastics, acrylics, etc. to the required processing temperatures. Torsion-resistant base frame consisting of welded steel profiles. Movable on four rollers. Upper folding frame at the rear side rotatably mounted in a solid spherical bearing. Two aluminium heating plates black anodized maximum operating temperature 180 C. Temperature control by means of electronic controller in separate switch cabinet in the base of the table. The swivel movement is actuated by pneumatic cylinders located on the side. Four adjusting screws on the side for setting the material thickness.

Year of construction: 1985, condition: ready for operation (used), Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible. Hfedpfx Aewty Emefter