Used Kaindl Bsg 60 for sale (20,664)

Condition: used, Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Lredpfjw Nbikjx Ab Tsh Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Ljdpfxoxlkg As Ab Torh Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel Lsdpsxgnz Tsfx Ab Terh - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), The Klingelnberg KNC 60 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the process of milling spiral-toothed bevel gear sets. Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Usable cutter head radii 55, 100, 135, 170, 210 mm Ledpovyd Ndefx Ab Torh Machine weight Approx. 16,000 kg Dimensions (L x W x H) 5750 x 2800 x 2700 mm *Image shows the machine in its current condition as a used machine and can be offered on request, partially modernized, or as a retrofit completely modernized with a new CNC control (SIEMENS ONE).

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Lrsdpfx Absxg Igie Tjh

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Technical Specifications & Performance Data This MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation. Manufacturer: MESAL Model: E50-60-15GA1 Year: 2013 Production speed: up to 18,000 bottles/hour Configuration: Rinser/Filler/Capper tri-block Filler valves: 60 Rinser grippers: 50 Capper heads: 15 Container type: PET Base format: 0.38L (380 ml) Neck finish: 38 mm Fill principle: Weight (gravimetric) Operating type: Automatic Electrical: 400 V, 60 Hz Control system: Omron PLC/HMI Approximate weight: 8,000 kg Advanced Automation & Control Systems The machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation. Omron PLC with modular I/O and clear status indicators Touchscreen HMI for parameter management and alarms Automatic operation with synchronized turrets Designed for stable weight-based filling accuracy Electrical supply: 400 V, 60 Hz Production Line Integration Capabilities This filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint. Ledpfjyhbgajx Ab Terh Inline integration with standard bottle conveyors Rinser/Filler/Capper tri-block layout for reduced floor space Suitable for still beverages: juice and tea Designed for PET bottles with 38 mm neck Base format 0.38L; additional formats can be supported with change parts Machine Condition & Maintenance History The machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and electrical assemblies present a solid basis for recommissioning into a used bottling line or second hand beverage production setup. Operational status: In storage Available for recommis...

Year of construction: 2000, condition: good (used), Contributed tool holder VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. WOHLENBERG etc. 2.piece . SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1.piece . SAUTER 0.5.921.106072.814 No.3 with ATC 1.piece . WENDEL 214.060/A3820 No.4 with ATC 2.piece . MULTIFLEX 252.71.566 No.5 and 6 Without ATC Lrodpfx Abjh Iz Dus Toh In good condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: AC, laser power: 6 W, type of cooling: air, We are offering this very well-maintained Sisma EASY 60 engraving machine, year of manufacture 2014. Condition: very good. The unit was overhauled by Sisma in 2020. If you have any questions or require more information, please feel free to send us a message or call us. Lodpfx Aboyla Rls Terh

Condition: used, Year of construction: 2009, Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides.   Technical data  year of manufacture: 2009 capacity 60/min  adjusted formats: 1,5L PET (2x(3x2)) operation: film only  application: water, beer, CSD condition: very good, still connected  Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available  Lrsdpfx Ajydkblsb Tsh

Condition: excellent (used), Year of construction: 1997, operating hours: 1,948 h, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 2,100 mm, total length: 1,150 mm, color: other, GVW: 2.880 kg Lrjdpfxsykazno Ab Tjh Lifting capacity: 1.500 kg Battery 48V 320Ah 2020, Air-front-tires 90%, SE-rear-tires 90%, fork length 1150 mm, No sideshift, Work lights,

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00543, Year of construction: 2020, operating hours: 2,780 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 5,100 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,833 x 1,200 x 2,275 mm Weight with battery: 5,100 kg Drive power: 17 kW Lodpfxoyhft Ds Ab Torh Operating hours: approx. 2,780 h EQUIPMENT Charger Note: The seat surface and curtains are damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00366, Year of construction: 2020, operating hours: 8,560 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Fork dimensions: 2,400 mm x 120 mm x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 8,560 h Lsdjyhfnhepfx Ab Tjrh EQUIPMENT Charger Note: The tailgate is slightly damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516301X00329, Year of construction: 2020, operating hours: 5,990 h, load capacity: 2,500 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No reserve price – guaranteed sale to the highest bidder! Lrsdsyhfi Sopfx Ab Teh TECHNICAL DETAILS Load capacity: 2,500 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 5,990 h EQUIPMENT Charger Note: The curtain and seat are damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516301X00322, Year of construction: 2020, operating hours: 9,350 h, load capacity: 2,500 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 9,350 h EQUIPMENT Charger Lredpfeyhfgqex Ab Toh Note: The curtain on the left side and the seat are damaged.

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Lodpfx Absx A H Rlo Tsrh turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead

Condition: used, Year of construction: 2005, operating hours: 4,095 h, machine/vehicle number: Z6005-5423, axle configuration: 4x4, fuel type: diesel, color: yellow, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 10.126 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.030 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Remanufactured: Yes Delivery terms: FCA, DAP, EXW Max. horizontal reach: 1040 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Rental currency: EUR Production country: US Additional information Lrsdpfoyi R Rwsx Ab Tsh Please contact Sales Department for more information

Condition: used, power converter / rectifier. Lrjdod Ihaxspfx Ab Tjh techn. details see photos.

Condition: used, power converter / rectifier. Lsdpfjd Ihaysx Ab Tsrh techn. details see photos.

Condition: excellent (used), Vollrath EWFX 60 dissolver Power 44 kW Speed range 200-1200 1/min Double toothed pulley Lrjdpfsrqfqtsx Ab Teh with wall scraper Switch cabinet with frequency converter 2 x stainless steel mixing tanks, 1,350 liters each Very good condition, straight from production!!!

Condition: used, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,200 kg, cutting length (max.): 3,000 mm, main saw diameter: 400 mm, slide length: 3,000 mm, sliding table length: 3,000 mm, space requirement height: 1,800 mm, space requirement length: 3,200 mm, space requirement width: 2,000 mm, table length: 3,000 mm, Equipment: scorer, No. 04518 Sliding table saw Martin T 60 CLASSIC Used, only 130 operating hours Motor power main saw 5.5 kW Sliding table 3000 mm long Saw blade size 250 - 400 mm diameter Cutting height maximum 130 mm Saw blade tilt motorized 0° - 46° Saw blade change with quick clamping system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds are determined by the position of the V-belt 2-axis scoring unit pneumatically controlled (Please note: On the video the scorer is not connected to compressed air, therefore you cannot see any height adjustment, but the function is given) Cutting width approx. 1250 mm Control PowerPC Operation via touchscreen Control for cutting height, cutting angle, scoring unit Digital display for cutting height, cutting angle, cutting width Suction connection 120 mm diameter at the bottom, 80 mm diameter at the top of the protective hood Cross table 1300 x 650 mm LW Edging ruler with 2 stops, extendable up to 3200 mm, swivels according to scale Protective hood arm can be swiveled away Complete technical documentation available Including various equipment and tools Transport dimensions approx. 3200 x 2000 x 1800 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Lsdjygav Rjpfx Ab Tjrh Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, mileage: 290,000 km, fuel: diesel, Year of construction: 2016, IVECO DAILY 60-15, license category C, year 2016, 290,000 km, refrigerated box 4.40 x 2.30 x H2.10 m, internal capacity for 8 pallets, movable partition wall, Thermo King V500 refrigeration unit (road and electric operation) with temperature recorder, Dhollandia tail lift with 1.5 t capacity. Vehicle is fully serviced, with good tyres and ready for use. Financing or leasing options available on site. Lrjdpfjympu Ajx Ab Tsh

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with our RK50U, SAS200, and FARS200 systems, and is ideal for use in drying chambers, smokehouses, and climate-controlled environments equipped with air dehumidifiers. Lredpforftxfex Ab Tjh The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is constructed from corrosion-resistant AISI 304 stainless steel, using a robust 40 × 40 × 1.5 mm profile. It features 30 levels with a 55 mm gap between each tier and is equipped with special locking mechanisms to prevent trays from falling during movement or operation. For easy maneuvering, the trolley includes six heavy-duty pendulum swivel casters (Ø125 mm), enabling rotation on the spot, even when fully loaded. Each trolley comes with 60 stainless steel trays, each measuring 900 × 500 mm. The trays are made from corrugated stainless steel wire mesh, available in 12×12 mm or 10×10 mm configurations. The wire thickness is 0.95 mm, ensuring excellent structural rigidity. Each tray includes a 15 mm high perimeter rim to promote optimal airflow and heat convection. A reusable, non-stick Teflon insert is included with each tray—perfect for sticky or soft products such as minced meat sticks, fish strips, or salami-style snacks. The total load per trolley is approximately 600 kg, with up to 10 kg of evenly distributed product per tray. The design supports both high- and low-temperature drying, and the trolley fits seamlessly into chambers with either horizontal or vertical airflow. It is optimized for easy cleaning and maintenance. This trolley is engineered for efficient moisture removal and uniform air distribution across all product levels—ensuring optimal drying performance and extended shelf life. Pricing & Availability • New set with 10×10 mm mesh and Teflon inserts: €3,500 (in stock in Vilnius, Lithuania EU) • Used set with 5×5 mm mesh, no Teflon: €2,300 (excellent condition, 7 units available) We deliver across the EU (Poland, Lithuania), UK, Ukraine, Australia and internationally. For technical drawings, a custom offer, or export documentation, feel free to contact us.

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  Total output: 60 cycles/min one lane length 3660 mm | width 1790 mm | height 2500 mm recommend specifications: Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm) Lrjdpjyb Sm Defx Ab Teh

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational Ljdpfsyb Si Ssx Ab Tsrh

Condition: used, Year of construction: 2006, Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustment options  Rejection: mono-X, DELTA-K-X Inlet control: mono-X Height adjustment: For rejections Cross adjustment: For rejections Accessories  Height-adjustable transport belts Cooling units for base housing and side wall Mouth outlet Lrsdpju Scr Eofx Ab Tsh