Used Kaltenbach Kks 401 for sale (110)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Dksdpfx Acohzbipsyju Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Dkodjvkphgjpfx Acyju Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: used, Saw blade Ø: 1310 mm round 440 mm square 400 mm Djdebzg R Tjpfx Acysku flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg

Condition: good (used), saw blade diameter: 400 mm, – Double miter – Mist lubrication system Dsdpfoim Ezgox Acyeku – Protective cap – 400V

Year of construction: 1996, condition: used, Used band saw Kaltenbach , model HMB 360 Technical data: Cutting diameter 90: 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m / min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx .: 780 kg Year of Build: 1996 Schnittbereich bei 90 rund: 305 mm Schnittbereich bei 90 flach: 360 x 305 mm Schnittbereich in Gehrung bei 45 rund: 265 mm Schnittbereich in Gehrung bei 45 flach: 265 x 305 mm Schnittbereich in Gehrung bei 60 rund: 175 mm Schnittbereich in Gehrung bei 60 flach: 175 x 305 mm Sgebandabmessungen: 3830 x 27 x 0,9 mm Sgebandgeschwindigkeit: 16 - 100 m/min Platzbedarf: 2300 x 1450 x 1650 mm Sgeantrieb: 380 V, 1,1 kW Weight : 780 kg Baujahr: 1996 Price of band saw machine Kaltenbach..... on request via e-mail Delivery conditionsDelivery time: from stock, t.v.v. Delivery: ex Baarle-Nassau Payment: for pick-up Prices: are net, excl. V.A.T. Technical details: changes under reserve Machinehandel De Leeuw BV can not be held responsible for differences in technical details in this offer and the actual machine Machinehandel De Leeuw BV is specialized in used machines and Dkedpfx Ajgbd Egjcyju

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Dedjvzp Uzepfx Acysku Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Dksdpfx Acjtqfvyeyeu

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 300242, cutting range round steel at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square steel at 90°: 600,460 mm, cutting diameter: 460 mm, space requirement height: 2,570 mm, space requirement length: 2,320 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, Equipment: rotational speed infinitely variable, BAND SAW KBR 460 NA A metal cutting band saw that combines high precision, power and automation. The KBR 460 NA from KALTENBACH is a solution designed for demanding production and industrial plants • High efficiency - a powerful main engine (7.5 or 9.2 kW) guarantees efficient and fast cutting. • Precision - infinitely variable cutting speed ensures perfect adjustment to any material. • Wide cutting range - supports round materials up to Ø 460 mm and square materials up to 600 x 460 mm! • Automation - possibility of setting sections up to 9999.9 mm long, which eliminates the need for manual operation. • Minimum waste - the automatic system allows you to leave a residual element only 30 mm long! • Stable and durable construction - weight 7500 kg guarantees reliability and long service life. TECHNICAL DATA Weight: approx. 7500 kg Dimensions (L/W/H): 2320 x 3660 x 2570 mm Width with chip feeder (optional): 4650 mm Cutting band Dimensions: 7470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1-7) Working range Dkedpev Irtgefx Acysu Material dimensions • Round material: max. Ø 460 mm • Square material (W x H): max. 600 x 460 mm Cutting lengths • With single stroke: min. 8 - 760 mm • With multiple stroke: max. 9999.9 mm Min. residual length in automatic mode: 30 mm Working height: 720 mm Electrical data • Main motor: 7.5 or 9.2 kW • Hydraulic motor: 2.2 kW • Coolant pump: 0.18 kW • Chip feeder (option): 0.18 kW • Roller conveyor drive (option): 0.18 kW • NC positioning unit (option): 0.37 kW

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Dkedpfxomrq Evo Acysu Saw blade diameter 250 mm

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network. Dksdpfx Acshkhumsyou