Used Kappa 400 for sale (17,555)

Condition: used, Year of construction: 2015, operating hours: 24,952 h, CMZ TA 20 Y-400 Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance spindle – wheelset: 473 mm Travel X / Y / Z / B: 310 / +70 / −50 / 640 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing outside / inside: 150 / 100 mm Spindle bore: 73 mm Bar passage: 66 mm Chuck diameter: 210 mm Tailstock: Stroke: 400 mm Turret: 12 stations, all driven Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (L x W x H): approx. 2.5 x 1.8 x 2.1 m Weight: approx. 6 t Fpodpsymc U Aofx Aa Asf Operating hours: approx. 24,952 h Machining hours: approx. 1,247 h Scope of supply: Bar feeder IEMCA KID 80/16, year 2018 Coolant unit

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Fpodpfx Aajyk Tlaj Aof Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Fjdpfx Aed Iiprea Aepf

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm Fpjded Iiptopfx Aa Aof band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm Fpodpfxow Intaj Aa Ajf --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp Fpsdpfx Aeyz Tqrja Asf - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: new, Two units available Screens NEW!!! Fedpsxq S U Eefx Aa Aspf 1. Type ELD 400/1 B 6771/00 StCd: A0E0 Week: 01-96 2. Type ELD 400/1 B 6771/00 StCd: A0E0 Week: 48-95 PRICE REDUCTION FROM 500 TO 400 EUR per unit Both screens together: 700 EUR

Condition: good (used), mileage: 759,721 km, power: 294 kW (399.73 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,150 mm, total width: 2,550 mm, total height: 3,980 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Second diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Manual adjustment - Sleeper cab Fpedpfjyvyu Hsx Aa Aef - Fabric upholstery - Central lubrication system = Notes = Number of axles: 2; Configuration: 4x2; Payload: 11,507 kg; Unladen weight: 7,993 kg; Gross weight: 19,500 kg; Total tank capacity: 1,217 liters; Second diesel tank; Fifth wheel height: 112 cm; Fifth wheel: Fixed; Number of diff locks: 1; Central lubrication; Suspension type: Air suspension; Cab type: Sleeper cab; Cruise control; Tachograph (control device); Digital tachograph; Air conditioning; Auxiliary heater; Electric windows; Electric mirrors; Color: Multicolored; Heated mirrors; Heated seats; Engine output: 294 kW (394 hp); Fuel: Diesel; Emissions standard: Euro 6; Transmission type: AS-Tronic; Gearbox make: ZF; Gears: 12; Power steering; ABS; ASR; Starter battery; Central locking; Seats: 2; Seat layout: 1+1; Seat upholstery: Fabric; Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread left: 5 mm; Tire tread right: 6 mm; Suspension: Leaf spring Axle 2: Twin tires; Tire tread left inside: 5 mm; Tire tread left outside: 3 mm; Tire tread right inside: 4 mm; Tire tread right outside: 5 mm; Suspension: Air suspension Weights Unladen weight: 7,993 kg Payload: 11,507 kg Gross vehicle weight: 19,500 kg Interior Number of seats: 2 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification Registration number: 70-BHV-5 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our selection includes all European makes, years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, quickly changing stock • Recognizable quality • Good prices • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration numbers arranged quickly • Specialist technical services • The safety of 'recognizable quality' • And more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, infeed belt “Stork” all stainless steel mesh wire belt belt width 400 mm mobile dimensions: (L x W x H) : ± 1.400 x 700 x 900 mm + “Marel Townsend” GoldFryer Type TBM 400/4000 TH all stainless steel suitable for thermic oil heated with lower and upper belt frying length 4.000 mm Fodpsyvtl Sjfx Aa Aspf belt width 400 mm adjustable speed oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm

Condition: excellent (used), CATALOG NUMBER 7948 Technical data: - track width: 400mm - working width of shaft: 400mm - max blade diameter (mounted: 350mm): 450mm - blade bore diameter: 70mm - max cutting height (with 450mm blade): 160mm - table width with extension: 710mm - table length: 1900mm Fpedpoyxrbkofx Aa Aof From above: - dogs/kickers: 2 rows - sliding roller, metal, pressure - dogs/kickers - sliding roller, metal, pressure - shaft with saw blades - smooth sliding roller, metal, sliding From below: - guide bar - dogs - track - electric body lifting - central track lubrication - 2 feed speeds + stepless - total power: 32kW - overall dimensions L/W/H: 2050x1800x1530mm - weight approx. 2000kg Advantages: – Italian production – very good condition – DTR documentation (technical manual) – used multi-blade saw Net price: 48,900 PLN Net price: 11,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Fpodjvvi N Iopfx Aa Aef

Condition: used, Centerless grinding machine ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap. Grinding wheel width: 200 Grinding wheel diameter: 400 Fpjdpfx Ajuyuvfea Ajf

Condition: good (used), mileage: 990,175 km, power: 294 kW (399.73 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, total height: 3,970 mm, Year of construction: 2014, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional options and equipment = - Heated mirrors - Digital tachograph - Trip recorder (control device) Fpsdpeyvpuijfx Aa Aef - Fixed fifth wheel - Halogen lights - Manual adjustment - Radio/cassette - Sleeper cab - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11,951 kg, Unladen weight: 7,549 kg, Gross vehicle weight: 19,500 kg, Total fuel tank capacity: 900 litres, Fifth wheel height: 111 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Trip recorder (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: Red, Heated mirrors, Light type: Halogen, Seat heating, Bluetooth, Flashing lights, Engine output: 294 kW (394 Hp), Fuel: Diesel, Euro: 6, Transmission: AS-Tronic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seat layout: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/55R22.5; Steered; Tyre tread left: 7 mm; Tyre tread right: 8 mm; Suspension: leaf spring Axle 2: Tyre size: 315/70R22.5; Twin tyres; Tyre tread left inside: 11 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 10 mm; Tyre tread right outside: 10 mm; Suspension: air suspension Weights Unladen weight: 7,549 kg Payload: 11,951 kg GVW: 19,500 kg Interior Number of seats: 2 Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Identification Registration number: 48-BFG-3 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European makes, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Competitive prices • Professional business conduct • Multilingual service • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of ‘Recognisable Quality’ • And more.... Please visit our website for special offers and our full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask us directly about our European warranty package.

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm Fodpfexwdw Esx Aa Aepf swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, Year of construction: 2025, I sell here several machines, devices, etc. for woodworking, forklifts, work platforms, as well as accessories and spare parts. Therefore, they necessarily also note my other auctions! Format circular saw table circular saw carpenter circular saw format saw WH- machines Type: Z45 - 400E Professional New wide aluminum format carriage 320 cm with carbide round bar guide system width approx. 415 mm Fedpfx Aaoh Hauyo Aspf cantilever table with extendable aluminum cutting fence, incl. 2x folding fence cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the saw unit. Electric tilting of the saw blade up to 45 with digital display of the tilting angle. Precise tilting segment guide of the saw unit. rip fence up to 125cm with fine adjustment stable 50 mm round bar guide parallelogram protection device with upper suction can be folded away for standing workpiece cuts. 2 different speeds adjustable ( 4000/ 600rpm) saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer with 120 mm scoring saw blade and electrical height adjustment Engine power main engine 5,5 KW with overload protection and thermal monitoring. Motor power scorer 1,1KW Body made of sturdy 6mm box construction with reinforcement Stable cast iron worktop incl. trimming wedge and eccentric workpiece holder The machine can also be purchased via installment plan with a term of 36 months. This offer is an installment plan leasing offer via the company DLL Leasing with a term of 36 months. Credit check and processing is done by DLL Leasing. Further terms and conditions on request. For further data, delivery times and availability please ask. Depending on availability, the machine can be inspected and tested at our warehouse. prior inspection is expressly desired, just leave tel. no. by mail, then I will get back to you about a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up yourself or shipping by forwarding at the expense of the buyer. Loading and packing can be organized by us. The shipping costs are a guideline, depending on distance and unloading possibility, they may vary, please inquire. An invoice with sales tax will be issued.

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm Fpsdpfx Aohz T Hfea Asf cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Condition: ready for operation (used), welding circuit at 60% ED: 310 A welding circuit at 100% ED: 235 A Fpsdsd R S Dfopfx Aa Asf electrical connection: 400 V space needed: 1000 x 750 x 630 mm

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm Fpedpfx Aeb Sciasa Asf weight: 1350 kg

Year of construction: 1966, condition: used, machine/vehicle number: 7293, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 110 mm cutting speeds: 10 - 44 m/min forward feed speeds: 0 - 500 mm/min cutting length: 10 - 500 mm electrical connection: 380 V Fpedpfx Aajbr Hwds Aof sawing drive: 4 kW space needed: 1360 x 2650 x 1850 mm weight: 950 kg

Condition: used, machine/vehicle number: 9029, table size: 400 mm Ø Fpedpfe N Ra Rsx Aa Asf height: 135 mm dimensions: 500 x 500 x 135 mm

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW Fpodpfx Aez N Amea Aof space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, machine/vehicle number: 87/64-369, Grinding wheel dimensions: 400 x 50 mm Fpodpfxjb Tqhqj Aa Aof Grinding wheel speed: 1400 rpm Drive motor: 380 V, 1400 rpm, 2.2 kW Space requirement: 750 x 470 x 470 mm Weight: 138 kg

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg Fedjv D Hzkopfx Aa Aspf

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Fpsdpfx Aajwx Hz Ej Asf Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: used, Year of construction: 1988, Saw blade diameter: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Miter cut at 45° round: 130 mm Rectangular: 40 mm Cutting speed: 10 m/min Hydraulically infinitely variable feed speed: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller table: 1100 x 1000 x 1900 mm Fpodpfjw Tk Ecjx Aa Aef