Used Kirchner Leipzig Planer for sale (2,393)

Condition: excellent (used), Year of construction: 2011, Jointer-thicknesser combination machine Manufacturer: Martin Dkodpfx Aj Af Ur Iok Aew Model: TP 300 Year of manufacture: 2011 Planing width: 530 mm Planing height: 3 - 250 mm Power: 5.5 kW Height adjustment: electric Cutter type: Tersa Number of cutters: 4 Max. chip removal: 8 mm Infeed roller: Steel Outfeed roller: Rubber Feed rate: 6 / 12 m/min Dust extraction port diameter: 140 mm Motor brake: Yes Weight: approx. 1,000 kg

Condition: used, Year of construction: 1998, Working width: 630 mm Planing height: 220 mm Planing shaft: Centrofix Number of knives: 4 Height adjustment: electric Planed thickness display: digital display Feed rate: 4 / 6 / 12 m/min Infeed roller: steel - ribbed Outfeed roller: rubber Table rollers: yes Motor power: 7.5 kW Dodpfo Af Hmcex Ak Ajkw Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1000 mm Weight: 1000 kg

Condition: excellent (used), functionality: fully functional, Hydraulic feeder type 814 300 Dkjdpfx Aks Ahimas Ajw 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider". Dksdpfx As Afznuok Aew

Condition: used, Year of construction: 2008, machine/vehicle number: MC00094230, functionality: unexamined, input voltage: 400 V, Equipment: CE marking, Thickness planer MAKA / GRIGGIO DH 520/A Year of manufacture: 2008 Machine number: MC00094230 Condition: Uninspected Delivery terms: Free on truck Location: 72178 Waldachtal Availability: Immediately - by arrangement Payment terms: Prepayment - by bank transfer Internal No.: 180-2 Technical data: - Planing width approx. 520 mm - 400 V - 50 Hz - Max. 8.85 kW - Max. 2900 rpm Scope of delivery: - Without additional accessories Dimensions & weights: - Installation dimensions L x W x H approx.: 1300 x 800 x 1400 mm - Weight approx.: 785 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of all warranties. ►Technical data subject to change without notice. Dodpfx Aez Rqgxjk Ajkw ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Dsdpfjz Uxmzjx Ak Aokw Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Surface table length: 1,700 mm Weight: approx. 300 kg Includes infeed/outfeed roller table.

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) Djdoz Tqznopfx Ak Askw - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. Dkedpjz Icvljfx Ak Asw The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12 m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR Dsdpfx Akezu Sgps Askw (Prices may vary due to higher fluctuations)

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), number of blades: 4, Surface planer SCM SF520, table length 2700mm, with 4 cutterblocks. Dkodpfx Aezxbcbek Asw

Condition: used, Technical specifications: Max. planing width: 600 mm Max. planing height: 250 mm Cutterhead diameter: 140 mm Number of knives: 3 Number of rollers in the table: 2 Feed speed: 2 speeds Manual lifting Dust extraction port: 200 mm Power supply: 380 V Motor power: 5 kW Dedpj Ahx Txjfx Ak Aekw Overall dimensions: Length: 1360 mm Width: 1100 mm Height: 1200 mm

Condition: excellent (used), SCM F520e Planer Dksdpfs Agf Eiex Ak Ajw 4 cutting knives, Comb plates on the table, Electrically adjustable feed table, width 520mm, table length 3000mm, adjustable fence, brake, well-maintained machine, quiet operation.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 3060, functionality: unexamined, power: 5.5 kW (7.48 HP), input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,600 rpm, rotational speed (min.): 5,600 rpm, overall weight: 570 kg, Equipment: CE marking, Sicar Thicknesser Forte 520, Thicknessing width 520 mm, max. workpiece height approx. 293 mm, Motor 5.5 kW, 400 Volt, 50 Hz, 4-knife Tersa cutterblock, Dedpey E Rzijfx Ak Ajkw as inspected, Ex Works, from location Seevetal, subject to prior sale.

Condition: excellent (used), CATALOGUE NUMBER 7990 TECHNICAL DATA - Shaft width 630mm - Max thickness of workpiece 200mm – Top: - Ratchets - Toothed feed roller - Pressure rollers - Planing roller - Pressure rollers - Smooth withdrawal roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor approximately 5.5kW - 2 feed speed settings - Feed motor 0.55kW - Dimensions L/W/H 1200x130x1100mm - Weight 1093kg ADVANTAGES - German-made - Used thickness planer, very good condition Dedpeztxgasfx Ak Aokw Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, total width: 1,500 mm, total height: 1,700 mm, Year of manufacture: 2000 Colour: Grey Empty weight: 2.500 kg Dksde Ah E D Hepfx Ak Asw Dimensions (LxBxH): 450 x 150 x 170 cm Four-sided planer Weinig Profimat 26 S, 5head Year of construction 2000 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines1. Spindle - under 4 kW 2nd/3rd Spindle - left/right 11kW 4. Spindle - above 5.5kW 5. Spindle - under 4 kW Feed motor 3kW Main fuse 63 amp. Dimensions 4500 x 1500 x 1700 mm (L x W x H), weight 2500 kg - Year: 2000 - Serial number: 89525 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 120 - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 24 - Transport dimensions: 4500mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1983, Working width: 510 mm Dedpfxezq Dcbo Ak Ajkw Planing cutterhead: Spiral cutter Number of cutters: 2 Feed table length: 2800 mm Feed table adjustment: hydraulic / foot pedal Adjustment for rabbet and chamfer joints: yes Chip removal display: scale Rabbet and chamfer joint display: scale Adjustable angle of the fence: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: excellent (used), Felder D 951 – Thickness planer, 500 mm planing width Manufacturer: Felder Model / Type: D 951 Year of manufacture: 2011 Technical data and equipment Dkodpfx Aks Aa Avij Ajw * Planing width: approx. 500 mm * Planing height: approx. 250 mm * Motor power: 5.5 kW * Number of planing knives: 4 * Infinitely variable feed rate adjustment * Feed rate: 4–16 m/min

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: Handwheel Planing thickness indicator: Scale Feed rate: infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: yes Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Dksdpjz I Iutsfx Ak Aew Machine width: 1200 mm Weight: 1000 kg

Condition: excellent (used), Catalog number 8130 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - silencing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESSER: - max thickness of workpiece in the thicknesser 240mm - thicknesser roller guard - from above: - pawls - infeed roller, toothed, helical - pressure rollers - planing roller - outfeed roller, smooth - main motor 3.7kW - 2 types of rotation speeds - manual table adjustment up/down - diameter of dust extraction nozzle 120mm - dimensions L/W/H 2000x900x1120mm - weight 550kg ADVANTAGES - Made in Italy - silencing comb - longer infeed table - unpainted Dkjdpfx Ake Aaarhe Ajw - very good condition - used planer-thicknesser Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2003, Working width: 520 mm Planing height: 250 mm Planing cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: Scale Feed rate: 2 speeds Infeed roller: Steel Outfeed roller: Steel Table rollers: no Motor power: 5.5 kW Dust extraction connection: 140 mm Machine length: 1200 mm Dksdoz A D Ulepfx Ak Ajw Machine width: 1400 mm Weight: approx. 900 kg

Condition: used, Year of construction: 1997, Working width: 500 mm Planer cutterhead: Strip cutter Number of cutters: 4 Length of surfacing table: 2800 mm Adjustment of surfacing table: Lever Indication of chip removal: Scale Adjustable angle of the fence: yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg Dkjdpfx Asz I Iumek Aew

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm Dkjdpfxjztpmqo Ak Aew - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1981, working width: 510 mm cutter head: strip knive number of blades: 2 surface table length: 2600 mm adjustment table: hydraulic Hollow and pointed joints adjustment: ja read out table hight: Scala Dksdpjy Hqdgefx Ak Aew read out Hollow and pointed joints: Scala fence tilting: yes motor power: 5,5 kW motor brake: yes, automatic machine length: 2600 mm machine width: 1000mm weight: 1050 kg

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts Djdpfev Scx Ujx Ak Aekw - Year of manufacture 2024 - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: good (used), Year of construction: 1983, functionality: fully functional, Used, compact LUREM C 260 EN2 surface planer and thicknesser from 1983. The machine is suitable for surfacing and thicknessing solid wood. It features a planing width of approximately 260 mm, adjustable surfacing tables, and a swiveling fence. The thickness is adjusted mechanically via a handwheel. Robust and compact machine, well-suited for carpentry shops, workshops, and ambitious users. Technical data / Features Manufacturer: LUREM Type: C 260 EN2 Year of manufacture: 1983 Machine no.: C.J. 0.17 Working width / planing width: 259 mm Motor power: 2.2 kW Max. speed: 6,400 rpm Thickness planer feed height: 140 mm Power connection: 400 V / three-phase Jointer cutter block Surfacing and thicknessing function Adjustable surfacing tables Fence included Height adjustment of the thickness table via handwheel Dust extraction connection available The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Dkodpfszzah Iox Ak Asw Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.