Used Knife Cutting Machine for sale (66,849)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Rodpfx Aezu Avzof Ajcf Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 24,297 h, machine/vehicle number: 161711, controller model: MAZAK & FANUC L-64, laser power: 1,500 W, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is suitable for processing sheet metal, tubes, and profiles! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 420 mm Swivel range A-axis: ±300° Swivel range B-axis: ±135° Laser power: 1,500 W CO₂ laser model: YB-L150A8M Sheet metal dimensions max.: 1,250 × 1,250 mm Table load max.: 145 kg MACHINE DETAILS CNC control: MAZAK & FANUC L-64 Operating hours: 24,297 h Machine weight: 8,300 kg Redpfsztxttox Af Ajcf Last operated until: March 2025 Currently disconnected and stored EQUIPMENT Cooler Control cabinet

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Rodpfx Aozt R R Rsf Aocf Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Rjdpezv N Hpjfx Af Aecf Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Rcsdpjhwrgtofx Af Ajf Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Rcodpfxog Tu N Aj Af Aef Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Rcodpfx Ajhwhfqof Asf Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Rjdehwhf Aopfx Af Aecf Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Rcedpohv Hkasfx Af Aof Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air-cushioned) • Light barrier • Programmable • Three extra spare blades • In production Rcodsytb A Sspfx Af Aef • Available: 05/2026

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: Rjdpfoqmm D Sox Af Aocf HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Rjdpfx Ajzm I Dhsf Aecf Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 7011036, Format (cm): 92 Equipment / Additional information: Side table, air table, safety barriers, 1xreserve knife Rcjdpfxjzw Axhe Af Asf VIBRO TABLE POLAR RB2 (Ref. No.: 39004.26) M. No.: 5881212 // Age: 1988

Condition: used, Year of construction: 2008, Program control Air table in the center + side tables Rcsdpfx Aszwkpuef Ajf Light barriers Spare blades Cutting length: 780 mm Stack height: 120 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: Rcedpfxezwl Dms Af Aef 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5561029, Polar 76 EM paper cutting machine, manufactured in 1985, with program control and air table, including 1 spare blade, in good condition, available immediately. Rcodporg D Ixefx Af Aef If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: used, This Lissmac stone cutting machine, manufactured in 2019, will be auctioned online as part of our industrial auction / machine auction, inventory clearance sale by Schnelle & Co. Ebi GmbH – construction equipment, power tools, accessories. You can find this and many other items on our platform. Rcedezv Sb Ajpfx Af Aef

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine Rodpjzv Trvsfx Af Aecf - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Rcsdpfxozv Tnwj Af Aof Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof Rcedjzv Sa Eopfx Af Aef + Nozzle changer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine Rjdozlpb Sjpfx Af Ascf - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC Laser Cutting Machine TruLaser 3030 (L20) 5000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Rcedszix Upjpfx Af Aof Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet metal outer edge detection - Lens with RFID chip Control system - Control system SINUMERIK 840D SL - Simple operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - CoolLine - Extended pallet entry - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Bystar 4025 NT 80 for sale Rcsdpfozw Em Iex Af Asf C02 laser 4.4kW Bylaer resonator Fully operational and can be seen in production Machine includes Dust extraction and chiller Also included is an additional Bylaser 4400 (4.4kW) Perimeter light guards The machine is unique in that it has two 8000mm change over tables that feed the 4025 machine, two extension work areas at each end of the machine as can be seen in the pictures allowing an 8000mm cutting area. Please feel free to contact if you require any additional information, currently in production but will be available for decommission in November due arrival of new machine.

Condition: used, LDV PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Model MFMC-12000 , Laser Power 12 KW. Rodpfx Afezwgg Nj Ascf

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Rsdpfx Aszw T Dnsf Ascf Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.