Kobelco sk 210 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
Rexroth MSK040B-0450-NN-M1-UG1-NNNN MNR: R911321001 3-phase permanant magnet motor, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Cea2sb2i more
4
Boring, spindle head, well head, Einstechbohrkopf, Einstechkopf, spindle boring head, boring head, spindle tool-spindle tool-SK40-for tool changer suitable spindle Mass mm mm length recording dimensions 75/70/H310 mm Weight 5.5 kg H27jzy82i more
3
Rexroth MSK040B-0450-NN-M1-UG1-NNNN MNR: R911321001 3-phase permanant magnet motor, serial number according to the photo, used, normal wear, 100% functional, included with com. photos C0m0nhh more
4
State and included in photos clamping force 85 t. Y3etw9in more
4
Transmission, Stinradgetriebe, angular gears br / br / -Antriebswelle 24 mm 40 mm br / -dimensions 440/225 / H280 mm br / weight 40 kg br / Translation 1: 11.14 Vq92a3 more
6
bore capacity in steel (diameter) 40/50 mm arm length 635 - 1230 mm workpiece height max. 707 mm spindle taper MK 4 threading M 28 / M 32 388ieroka spindle stroke 200 mm table-size 1300 x 710 mm feeds 9, von 0,08-1,25 mm/U spindle turning speed range 12, von 56-1120 U/min distance table-spindle nose min./max. 157 / 707 mm Drive 4 / 3,4 kW Machine height max. 2765 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2,1 x 1,5 x 2,76/3,3 m Condition: ready for operation Condition... more
1
battery charger for forklift-trucks capacity 24 V 210 A 380 V L7wiu photo shows similar charger with different capacity more
5
chamfer width 1 to 20 mm - stepless adjustable chamfer angle 15 to 60° - steplessly adjustable forward feed manual speed 2,850 rpm electrical data 220 V / 1.1 KW Daunqtewo with turning plates for replacement purposes, tools in transport case space requirements length - 455 x depth - 365 x height - 270 mm weight approx. 25 kg more
3
clamping width 2000 mm clamping length 2000 mm workpiece weight 25000 kg bed length 3000 mm table height 890 mm table width 2766 mm x-travel 1200 mm 3xh7eebtn electrics - voltage/frequency 380/50 V/Hz dimensions of the machine ca. 3x2x1 m weight of the machine ca. 9 t more


kobelco sk...
every day

New machines via email!

Be informed!
5
Double end, edging machine, Ritz Motor, Zerspanermotor, electric motor, spindle motor, cutter motor br / br / power 3.0 kW 17600 U / min at 300 Hz br / -voltage Y 400 Volt br / uptake shaft 30 mm br / -dimensions 400 / 100 / H130 mm br / -weight 13.1 kg 0jv7xkwh more
6
sheet width 3200 mm plate thickness 10,0 mm no. of strokes 13 Hub/min Dvyv8y type of control konv. down holder 16 Stück work height max. 895 mm cutting angle 1,3 ° back stop - adjustable 1.000 mm total power requirement 15,0 kW weight 8.500 kg range L-W-H 3.850 x 2.250 x 2.100 mm more
2
Drill MK 4 with automatic transmission. Feed and thread cutting device. Speed ​​range 80-2800 U / min, throat 300 mm, table 380 x 500 mm, 160 mm Pinolhub.. Wbxkqjuk more
6
Vehicle data - make: BT - type: SWE 200 D / / 2868 STD / initial lifting HH 2100 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2100 mm - range: 0 mm - year: 2013 - operating hours: 2868 - internal No.: C0293 _ Mast data - mast type: standard - height: 2100 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1550 mm - weight: 965 kg _ J73uoj Battery & cha... more
6
Siemens Simodrive 610 6RB2100-0NA21 control chart 462 110.9070.21 U V W + Siemens 6RB2100-0SA21 modules 462 110.9080.21 D E F, used, good condition, 100% functional, included with com. photos Nowf9ftf more
6
turning diameter over bed 1250 mm turning diameter over slide rest 900 mm turning length 12.000 mm turning speed range 1.: 1,4 - 71 U/min turning speed range 2.: 6,3 - 315 U/min feeds - longitudinal 36n: 0,125 - 48 mm/min feeds - cross 36n: 0,05 - 19 mm/min thread - inch 33: 24 - 1/2 inch. thread - module 11: 2 - 5 mm thread - mm pitch 29: 1 - 50 mm rapid traverse of slide 3.600 mm/min electrics - voltage/frequency 380/50 V/Hz weight of the machine... more
5
Double end, edging machine, Ritz Motor, Zerspanermotor, electric motor, spindle motor, cutter motor br / br / power 8.0 kW 17600 U / min at 300 Hz br / -voltage Y 400 Volt br / uptake shaft 48 mm br / -dimensions 480 / 125 / H170 mm br / -weight 28 kg Yqsqso more
2
volume capacity 313 m³/h connected diameter 70 mm low pressure 23 kpa container volume 69 l Electric capacity 3000 W voltage 400 V total power requirement 3,0 kW dimensions of the machine ca. 0,80 x 0,80 x 1,30 m Bzhnajob more
1
Manufacturer: VDL. Barsnvk30l Type: Y 40 Built in 2006 Loads 41 to Classification H2 / B4 Spreader is fully functional and ready to use directly. more
6
2.Getriebe Fabr. North type: SK9082-1/52 SEP215 1 x shaft on the right side 1 x shaft on the left side M8nrd Like new only run test 12 000Nm. more
6
Siemens Simodrive 610 6RB2100-0NA21 control chart 462 110.9070.21 W + Siemens 6RB2100-0SA21 modules 462 110.9080.21 D E F, used, good condition, 100% functional, included with com. photos Ciqw3ld more
1
Surface plate dimensions 210 x 210 x 90/30 mm Dshu3ch more
5
Double-end edge banding machine Ritz Zerspanermotor motor electric motor 1x motor 0.3 kw 17300 rev / min at 300 Hz indexable insert milling cutter 3x motors available-price-piece weight 4 kg / piece 3lw3ml8z more
3
clamping width 2000 mm 3xh7nvhho clamping length 2000 mm workpiece weight 25000 kg bed length 3000 mm table height 890 mm table width 2766 mm x-travel 1200 mm electrics - voltage/frequency 380/50 V/Hz dimensions of the machine ca. 3x2x1 m weight of the machine ca. 9 t more
6
1 CNC Multitasking Machine Mazak model Integrex j-200 Mfg. year 2010 Nov., installed 2011 Mazatrol Matrix control EIA/ISO Travel X/450 mm Z/550 mm Y/200 mm max. turning diameter 500 mm Spindelmotor AC 11 kW C-axis max. bar working capacity 65 mm max. speed main spindle 5.000 rpm 3-jawchuck Kitagawa B-208 Milling spindle, Capto C6 Millingspindle 7,5 kW max. speed milling spindle 12.000 rpm B-axis Y-axis ATC with 36 stations Bzuah2r 15 bar high pressure coolant th. Milling spindle Interface for ... more
6
Built in 2001 Working area X 3000 M8m3f Workspace Y 1000 Number of milling spindles 1 Tool changing stations 8 Boring spindles vertical 14 Machine console table Spindles of horizontal X 4 Spindles horizontal Y 2 Design boom machine Yes Number 6 consoles Safety equipment floor mat Availability in the short term, from site Still connected ready for operation State well the tool and the drills do not belong to the offer Machine is a workshop - and a very good driver more
2
Siemens 6RB2100-0NA11 regulation 2-axles, used, low wear, 100% functional, included with com. photos 9ex7ofzi8 more
1
x-travel:2100 mm y-travel:610 mm z-travel:610 mm total power requirement:18,5/22,5 kW Mcihr Unused machining center Microcut TC2100 with Fagor 8070. More information can be found in the appendix. more
5
Modular units, sizing unit, Zerspanaggregat, milling unit, trimming unit, trimming unit, trimming unit, double end, edging machine, Ritz Motor, Zerspanermotor, milling motor for edging machine br / br / -HOMAG trimming unit can rebating, grooving and profiling br / -With keying of each 2 pages br / -Fräsaggregat pivotally br / -2 x motors Perske br / power 0.15 kW br / -voltage 133 volts br / frequency 200 Hz br / -Speed ​​11,160 U / min br / -Other engines with other services at an additional ... more
4
pressure 100 t throat 325 mm stroke 20 - 140 mm table-size 890 x 580 mm hole in the table 300 x 300 mm dayligth 330 mm ram hole Ø 50 mm strokes per minute 55 / 100 1/min voltage 380 V ram adjustment 80 mm total power requirement 7,5 PS weight of the machine ca. 5500 kg J7gvkj dimensions of the machine ca. 1,30 x 2,10 x 2,70 m - Fab. No.: P4761964 - foot switch more
5
pressure unbeknt. t throat unbeknt. mm stroke unbeknt. mm total power requirement kW weight of the machine ca. t B7tgokvw dimensions of the machine ca. m more
2
feed pressure 0 bar liter capacity 700 Liter/Minute Ibhmteh total power requirement 2,2 kW brandnew high pressure pump. Details see photo of type plate. more
6
Siemens Simodrive 610 6RB2100-0NA21 control chart 462 110.9070.21 Q R S + Siemens 6RB2100-0SA21 modules 462 110.9080.21 D E F, used, good condition, 100% functional, included with com. photos 9k9vxzy2h more
2
clamping diameter: 210 mm weight of the machine approx.: 38 kg hole circle - max.: 190 mm 3 jaws chuck on plate Tps87wxny plate size= 390x300x25mm more
5
Electric chain hoist, crane, overhead crane, mounting crane, electric lift br / br / -Tragkraft 1,600 Kg br / -Haupthub 4 m / min br / -Feinhub 1 m / min br / -max. Carrier width of drive 140 mm br / -Kettenzug lift height 4,300 mm br / -1x chain hoists available br / prize piece br / -dimensions 640/400 / H800 mm br / -Eigengewicht 104 kg Xx888zze7 more
3
Machine milling cutters for perfect Binder 9yxcy7ybu more
6
Stable timber task consisting of small business -Task cross conveyor, length approx. 6, 0 m with 4 strands of chains -Separation cross conveyor with hipped roof bars 6 chains / 3 bars -Disc feeder -Block train with Hydr. Off wiper Round timber task can be sold alone. Stable design. M8ny7 more
6
turning diameter over bed 1500 mm turning diameter over slide rest 1100 mm turning length 13000 mm control SIEMENS 820 T faceplate turning speed range 0,9 - 315 U/min max. workpiece weight between centres 14000 kg main drive DC 42 kW total power requirement 65 kW weight of the machine ca. t dimensions of the machine ca. m - CNC control SIEMENS 820 T - increased center height 1500 mm - positioning of faceplate by M-function or manual in inching operation with digital read out - additional ... more
4
Motor power 18.4 KW-speed 1400 rev / min-max pressure 180 bar-oil cooler-Weight 450 kg B8lavqkw more
2
table length 600 mm table width 600 mm 3jsrvcyd3 workpiece weight t no. of flutes 12 Stück groove width 16 mm flute distance 10 table height 210 mm weight of the machine ca. t more
4
machine-vice Hilma 160 mm jaw-width + cube desk with t-slots Cxdzyz7k more
6
Manufacturer BOA Typ 2100 A 5V (8) RC 90 90 Year of construction 2001 Sixp0e7b Hours of operation 38.986 h Press power main press 88 to Feed channel 1.620 x 1.000 mm (l x w) Bale size 1.100 x 720 mm (w x h) length adjustable Driving motor 2 x 45 kW Connected load 100 kW Tying system 5-fold vertical, fully automated Bale weight approx. to 900 kg, depends on material Transport dimensions only baler approx. 12.628 x. 2.500 x 2.967 mm (l x w x h) Machine weight baler approx. 26 to Comments: The ... more
5
Tenon slot machine, tenoner, Zapf bats, slit rotor, Fingerjointing machine br / br / -Umfälzrotor 2.2 kW 5650 U / min br / br uptake / -Sägemotor 3.5 kW 2870 U / min br / br uptake / -Bohrköpfe 0 , 8 kW 2820 U / min br / -Bohrabstand adjustable 230-560 mm br / frequency inverter type Perske 7.5DW10 / 2 100Hz 7.5 kVA br / br -Längenanschlag / -Werkstückspannung pneumatically br / br -pneumatischer feed / -dimensions 1520 / 1800 / H1400 mm br / -weight 1600 kg Yjeujogjj more
5
Injection moulding machine ARBURG 320 M 750 – 210 Barqgeqws2 Machine data: Year of construction: 1990 Hours of operation: approx. 78.300 Cylinder/snail Ø: 30 mm high wear strength 2 core cable with core it's control to delay of the screw-in signal when screwing the threaded cores. 2015 was performed the last audit of the hydraulic lines and hoses still replaced. The machine is still fully functional and is still daily in use. Machine is sold as second-hand machine with traces of use, wi... more
4
Type: SK 3255Make: RITTAL2pcs available Cej277ues more


kobelco sk...
every day

New machines via email!

Be informed!

to

to

Change search
KOBELCO SK 210
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close