Kobelco sk 235 sr buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: Wueazwg3n SKODA SRM 100 Heavy Duty LatheSpecifications: -- 26"" Over Cross Slide -- Two steadies -- Tracer -- Lots of change gears will cut any thread. -- Footprint is 22’L x 5’W x 7'H -- Weight Estimated 32~35,000 [...]: -- Built in Turret Tool Post. --Factory Manual Directly from [...] SRM 100 Heavy Duty Lathe more
6

Sweeper NILFISK SR1450B

Düsseldorf Germany
6383 km
2009
used
Offer
Another 3 days
Dimensions (l x w x h) approx.: 1900 x 1400 x 1600 mm Weight approx.: 630 kg Bbajzqsima Description: Power 2,5 KW. Serial number 071812635 with waste automatic unloading system. In Online Auction with approx. 165 further Machine Tools and other Assets! Bidding ends: Tuesday, 27 February 2018 from 2pm (local time) Auction start price: EUR 2.500 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
6
Hours of operation: 12204 Du0z3nqb Weight: 25000 kg -Mono - !! new incl. extra Mono block! -1 x new low. -Hammer Looper thread and scissors hydraulic -Pipe fracture safeguard -600 mm floor plate -Drive 50%-60% good -6 cylinders Mitsubishi 6D34-TLUC turbo engine -Electric refuelling pump -Climate -CE /. -Mono - !! incl. extra Mono boom new! -1 x new bucket -Hammer of grab - and Cutterlines -security valves -600 mm track shoes -underc. 50%-60% good -6 cyli... more
4
2011 New Holland Kobelco E135BSR-2 600mm Tracks, Blade, CV, Piped c/w 3 Piece Boom, Reverse Camera Ey90aaz This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, DE on 14th and 15th February 2018. For more information go online. more
5
Teigausroll - and versatile machine Gaef7wx23 Make: RONDO Model: SKO 683 Band width: 635 mm with automatic switching Cone winding machine Overhauled top Warranty Delivery: free House more
1
Manufacturer: Kaeser compressor Model: ASK 27 Bu. 2005 Quantity: 2,6 m 3/min Mpbmb Pressure 8 bar Electric motor: 15 kW Load / Gesamtstd-21-419 / 44 288 Dimensions L x W x H = 1,130 x 780 x 1.260 mm Weight 400 kg new maintenance, filter + oil change done dur more
6
maximum capacity: 2500 kg stroke: 6000 mm gauge width: 8000 mm Dimensions (l x w x h) approx.: 8000 x 1800 x 4700 mm Fh3vgat Weight approx.: 2400 kg Description: Load capacity 2.5 tons, lifting height 6 m, track width 8 m, wheelbase 2.5 m, 8000 x 1600 rectangular dimensions, load lifting speed in nominal / reduced 5 / 1.1, lowering speed in nominal / reduced 5 / 1.1, the nominal / reduced driving speed of the car 20/5 m / min, speed / nominal speed of the bridge 36/8 m / min, noise level max.82... more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor Voltage 400 Volt -1 x motor 0.18 kW 10800 rpm at 200 Hz Recording conical 18 to 19 mm Vwfmg Right thread M10 -1 x engines available Award pieces Dimensions 195/70/H90 mm Weight 2,0 kg more


kobelco sk...
every day

New machines via email!

Be informed!
4
Machining: milling / drilling Cone: HSK 63 F UPM: 18000 Rotary feedthrough: no Lubrication: Grease Wmx08 Internal cooling: no more
3
turning diameter over bed 3200 mm turning diameter over slide rest 2700 mm turning length 13000 mm speed 0.35 - 56 (12x) m/min total power requirement 110 kW Bbdmvuf2lz weight of the machine ca. t dimensions of the machine ca. m more
6
Short tail excavators from Japan, 24to, Inside diameter 4 m,. with Dozer blade,. Air conditioning, radio, fully lined, hammer, scissors, hook, SW, 7055, Oilquick quick coupler Spoon package 600 mm knife,. 800mm with rock teeth, 1800mm of swivel bucket. evlt. Gripper Verachtert bio oil filling (Pan Dolin) Drive over 80%. Overall width 2, 8 m ready to use,. 2q2dpy Machine is completely dry more
6

Floor cleaner NILFISK SR1100 ECO

Düsseldorf Germany
6383 km
used
Offer
Another 10 days
Dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm Juu2du Weight approx.: 400 kg Description: Petrol engine, see photo In Online Auction with approx. 142 further Machine Tools and other Assets! Bidding ends: Tuesday, 06 March 2018 from 10am (local time) Auction start price: EUR 2.700 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
3
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Motor 0.5 kw 10500 rpm at 200 Hz Motor of 0.5 kw 15810 U/min at 300 Hz Voltage 400 V Recording diameter 18 mm Cone Weight 3 kg Hidcnqf2e more
6
turning diameter over bed 2400 mm Dvhekpz turning diameter over slide rest 2000 mm turning length 8000 mm faceplate diameter 2000 mm max. workpiece weight between centres 60000 kg bed width 2190 mm spindle turning speed range 0,45 - 90 U/min feed 0,18 - 5,6 mm/U steady 2 Stück total power requirement 60 kW weight of the machine ca. 47 t dimensions of the machine ca. 14,5 x 3,60 x 2,95 m Machine overhauled 2008 more
6
turning diameter over bed 1400 mm turning diameter over slide rest 950 mm turning length 6300 mm faceplate 1250 mm Giuzbqr steady 395 mm steady 620 mm roll stand workpiece weight 16000 kg workpiece weight in steadies max. 20000 kg total power requirement 37 kW weight of the machine ca. t dimensions of the machine ca. m more
6
The "Skill Drill" machine, a 6-axis numerically controlled drilling machine for making holes, notches and cut-outs on flat glass plates 4 to 20mm thick. Technically, the machine is in perfect condition and has always been properly and partially serviced by the manufacturer. Fvpwglcfm The machine was bought and constructed in 2011, which is about 6-7 years old. more
1
Manufacturer: Kaeser 29goezjzq Model: SK 19 Bu. 1997 Pressure: 10 bar Quantity: 1.59 m 3/min Electric motor: 11kW Hours of operation: 12600 Dimensions WxDxH = 785 x 820 x 1010 mm Weight: 270 kg Maintenance filter + oil change more
6
Dimensions (l x w x h) approx.: 1700 x 1000 x 1370 mm Weight approx.: 723 kg Gvfsrs Description: Working width approx. 1055 mm, sweeping roller 300 x 800 mm, container for sweepings 130 l PWR/A = 2.13 kW, battery 24 VDC, YOM presumably 2010, original price approx. 20000 euros more
3
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor -1 x motor 0.18 kw 10800 rpm at 200 Hz Qlg0necpt Weight 2 kg more
3
turning diameter over bed 1600 mm turning diameter over slide rest 1200 mm Gluqvvd turning length 6000 mm spindle diameter 100 mm speed 1,8 - 355 (x24) m/min voltage 380 V total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Bavzgca3wr Technical data... more
6
Lathe Heavy Duty SKODA SR1600X8000 Yom 1972 Made in Czech Republic B3tlgxl Main technical data: - 3 guideways - Swing over bed : 1.600 - Swing over carriage : 1.200 - Distance between centers : 8.000 - Max. work piece weight B. centre: 28 t - Max. work piece in chuck : 6 t - Speeds. 24 x 1,8 till 355 Rpm. - Mot. tailstock - Power. 400 v / 75 kW. - 4 steady rest For more information please contact us. more
3
Centre Distance 6.000 mm Max. Swing over Bed Ø1.600 mm Max. Swing over Cross Slide Ø1.200 mm Spindle Bore Ø100 mm Including accessoires 2nuitom2 More information and picturues on request more
4
Workspace Grinding width 400 mm Largest working height at new grinding tools 130 mm (Workpiece passage) Grinding wheel Speed RPM/575 Peripheral speed 18 m/s Y23vukskw Diameter grinding wheel 600 mm Feeds Workpiece feed (magnet Ø 1000 mm) from 180 2,600 mm up to / s Grinding wheel adjustment of electronic before - and down counter Footprint of the machine (with AIDS) Length approx. 4,800 mm Approximately 3,700 mm wide Maximum height 2600 mm Weight approx. 9,000 kg (with Hilfsein... more
4
turning diameter over bed 1100 mm turning diameter over slide rest 710 mm Mdbod turning length 6000 mm Torque 35000 Nm Height of centres 550 mm steady 100-440 mm steady 280-550 mm steady 80-300 mm chip conveyor workpiece weight 10000 kg workpiece weight in steadies max. 15000 kg total power requirement 55 kW weight of the machine ca. t dimensions of the machine ca. m more
1
SRF Pro filter device M80wl The Middle photo is the SRF Pro SRF Pro Compact and robust filtering devices with exhaust arms for low to medium smoke and dust. For the sporadic to regular use Quality made in Germany SRF Pro 3 m suction arm Scope of application Low to medium smoke and dust Occasional to frequent use Use Little run the extractor hood required Convenient filter change maintenance door Safe operation due to phase sequence detection Properties Safe operation through f... more
2
Small radial drilling machine Manufacturer Stankoimport Type 2M53Y Built in 1981 Tool holder MK4 Speeds from 35.5 to 1,400 rpm in 8 steps Number 6 feeds, maximum feed force 800kp Maximum drilling capacity in steel mm 35 mm RADIUS max 1.000mm 9gg8fgo0x RADIUS min. 290mm Maximum distance between spindle end face and base plate 1,120 mm Maximum distance between spindle end face of table 630 mm Column diameter 250 mm Of the machine foot width 800 mm 1,850 mm length of the machine 2,4... more
3
Centre Distance 13.000 mm Gtnsio Max. Swing over Bed Ø3.200 mm Max. Swing over Cross Slide Ø2.700 mm Bed Width 3.500mm Including accessoires More information and pictures on request more
6
At the Moment our Maschine is combined with a second SRM (1250x6000) so it´s possible to turn/weld up to 17 meters in length. The Price for the second SRM is 25.000,00€ plus Vat. Guzxxw All other specifications can be found in the PDF doc down below. Feel free to ask via mail or phone if you require any help. reg more
6
turning diameter over bed 1400 mm turning diameter over slide rest 1000 mm turning length 11280 mm faceplate 1250 mm workpiece weight in steadies max. 20000 kg Cqzeipes steady 395 mm steady 620 mm roll stand workpiece weight 16000 kg total power requirement 40 kW weight of the machine ca. t dimensions of the machine ca. m more
1
SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Sswrzo Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure 3-stage filter type disposable filter filter surface approx. 12 m² of filtration efficiency > 99% filter material glass fibre welding smoke off vagina c... more
6
Swerdrehmaschine Skoda SRM 1250 x 7000 turning diameter: 1250 mm turning length: 7000 mm turning diameter over bed: 1250 mm Diameter above transversing slide: 900 mm max length of the workpiece: 7000 mm spindle speed: 1.4 - 315 u min-1 width of the bed: 1100 mm max workpiece weight : 14.000 kg main drive power: 37 kw Jtywhq more
6
 Start Chat

Servo motor Lenze MDSKSRS071-33 325V 3~ 4,6 kW 180 Hz 12,

We offer: Servo motor Lenze MDSKSRS071-33 325V 3 ~ 4,6 kW 180 Hz 12.3 NM The Elekt1omotor comes from a Geschoeftsaufloesung spare parts stock. He is in stock. Outwardly he is dusty due to storage. . Technical data Electric motor: MDSKSRS071-33 Manufacturer: Lenz Aerzen No. 0581224 Year of constr.: K.a. Voltage: 325V 3 ~ IP 54 : KW 4,6 Speed: 3600 1/min Torque: 12.3 NM M0 14.8 nm Donors: RS0119955791 Current: 10 A max 45 A Wellw: 14 mm New price: > €1000 Weight: 12.5 kg ... more
1
Nilfisk Alto Floortec R 360 gasoline or battery Krq9j with brooms +++ just please no obligation ask another +++ more
5
+ 2 steady rests with diameter 400/630mmMaschinen KennungInv. ID: 15.200Fabrikat: SkodaTyp: SRM 125 x 6000Antriebsleistung: 37 kwBaujahr: 1974Daten turning ü. Support: Ø 950 mmDrehen ue. Bed: Ø 1,400 mmUmlauf: Ø 1,250 mmmax. Turning length: 6,300 mmmax. Piece weight: 16.000 kg - without Unterstuetzung20. 000 kg - with support Mq97j more
6
turning diameter over bed 1250 mm turning diameter over slide rest 950 mm turning length 8000 mm faceplate diameter 1250 mm max. workpiece weight without steady 14000 kg Qhfa2qzic max. torque on the faceplate 3150 kpm (30,900 Nm) total power requirement 40 kW weight of the machine ca. 21 t dimensions of the machine ca. 11000 x 2150 m Heavy Lathe - General reconditioned after NEW Grinding, Scraping, NEW electric etc - Possible to check under power more
4
Diameter over bed 1.260mm, distance between Center 3.000mm, face plate Diameter 1.250mm, max. workpiece load 14tons, main drive 34kW, steady rest Iei7esb more
6
Heavy duty lathe SR 1600/8000 - turning diameter 1600 x turning length 8000 mm / SKODA - turning diameter over bed, mm 1600 - turning diameter over cross-slide, mm 1220 - workpiece length, mm 8000 - spindle speeds, RPM 1.8-355 - width of bed, mm 1700 Gseavuvoc - workpiece weight, kg 40000 - main drive power, kW 110 more
4
SERVOPACK YASKAWA CACR-SR20BE 12G-E used, tested exchange price !! Warranty 6 months Gcuwpcf more
6
SKODA BIG LATHE SR2000/10000 YOM 1970 PARTLY OVERHAUL 2016:NEW MOTORES,NEW INVERTOR POWER MITSUBISHI PLC,NEW ELECTRIC,NEW MOVING PULT.IS WITH GRINDING AND TAPER TURNING ATACHMENTS IS IN POWER H0dqthsh DIA MAX.2500 L-10000 more
6
Model: SRM 125 Swing Over Bedways: 1250 mm Swing Over Cross Slide: ca 900 mm Distance between centres: 8000 mm Max. weight of workpiece: - kg Diameter of face plate: 1250 mm Max torgue: 3159 kpm Spindle speed: in 36 steps 1. row: 1,4 - 71 rpm 2. row: 6,3 - 315 rpm Feeds: in 36 steps Gudrfjgbg Longitudinal feeds: 0,125 - 48 mm/r Cross feeds: 0,05 - 19 mm/r Main motor: 37 kW Dimensions L x W ca 11000 x 2150 mm weight of the machine ca 19000 kg Lathe in very good ... more
6
Heavy Duty Lathe SKODA SR1600X4000 Iqfh9mz - new electric equipment ; - new painted; Main technical data: - 3 guideways - faceplate dia. 1540mm - Swing over bed : 1.600mm - Swing over carriage : 1.200mm - Centre distance : 4.000mm - Max. workpiece weight between centres: 28 t - Max. workpiece in chuck : 6 t - Speeds. 24 x 1,8 till 355 Rpm. 4 steady rest For more information please contact us. more
6
diameter over bed 1.260mm, diameter over cross 900mm, distance between center 3.000mm, face plate diameter 1.250mm, spindle speed 1,4-315rpm, max. workpiece load without steady rest 14tons, main drive 34kW, steady rest Hyldc9r more
2
SERVOPACK YASKAWA CACR-SR10BE 12G Used, tested Warranty 6 months exchange rate !! Stchwitx more


kobelco sk...
every day

New machines via email!

Be informed!

to

to

Change search
KOBELCO SK 235 SR
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close