Kobelco sk 35 sr buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Short backhoe, 24to, 2q2dpy German machine, 4-cylinder HINO-engine, very strong and very economical! Inside diameter 4 m,. with Dozer blade,. Air conditioning, radio, fully lined, hammer, scissors, hook, SW, 7055, Oilquick quick coupler Spoon package 600 mm knife,. 800mm with rock teeth, 1800mm of swivel bucket. evlt. Gripper Verachtert bio oil filling (Pan Dolin) Drive over 80%. Overall width 2, 99 m ready to use,. Machine is completely dry more
1

MANUAL LATHE SKODA SRM 100

North Carolina, United StatesUnited States dealership location
518 km
1976
used
Elect./Voltage: Juwrg3 SKODA SRM 100 Heavy Duty LatheSpecifications: -- 26" Over Cross Slide -- Two steadies -- Tracer -- Lots of change gears will cut any thread. -- Footprint is 22’L x 5’W x 7'H -- Weight Estimated 32~35,000 [...]: -- Built in Turret Tool Post. --Factory Manual Directly from [...] SRM 100 Heavy Duty Lathe more
5
screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: 2sv223o7n microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMEN... more
6
Type of fuel: Electric Field of application: Grounds care EPA marked Bcihlybys0 Latest inspection: 2018 more
5

Aluminium Circular Saw KALTENBACH SKL 350

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
used
saw blade diameter:350 mm cutting diameter:120 mm :280 mm capacity 90 degrees: flat:70 x 240 mm capacity 90 degrees: square:105 mm capacity 45 degrees: flat:50 x 200 mm capacity 45 degrees: square:95 mm Uddknbe3y Cutting height:120 mm cutting speed:1250 m/min feed speeds:0-500 mm/min total power requirement:2,5 kW weight of the machine ca.:700 Kg dimensions of the machine ca.:1050 x 1050 x 1170 mm more
4

Heavy Duty Lathe SKODA SRM 100

Willich, GermanyGermany dealership location
6368 km
1970
used
turning diameter over bed 1100 mm turning diameter over slide rest 710 mm turning length 6000 mm Torque 35000 Nm Height of centres 550 mm steady 100-440 mm Mdbod steady 280-550 mm steady 80-300 mm chip conveyor workpiece weight 10000 kg workpiece weight in steadies max. 15000 kg total power requirement 55 kW weight of the machine ca. t dimensions of the machine ca. m more
5

SKODA SRM 100x8000

Stuttgart, GermanyGermany
6662 km
2004
excellent (used)
Bczvka2pg9 more


kobelco sk...
daily

New machines via email!

Stay updated!
4

Forklift BT Product SRE 135L

F- CONTAMINE SUR ARVE, FranceFrance dealership location
6598 km
2007
used
TECHNICAL DETAILS, nominal capacity : 1350 [kg], translation speed without load : 9.4 [km/h], translation speed with nominal load : 8.6 (km/h], max. slope with nominal charge : 8 [%], noise level : 70 [dB], frame width : 1020 [mm], overall fork width : 570 [mm], min/ max mast height : 1937-2622 / 3317-5921 [mm], cabin height : 1980 [mm], weight without battery : 1575 [kg], battery weight : 370-530 [kg], number of hours : Cip7lksi more
4
Transrollspindel 64905 2 R32-05-33-0283-735 L = 435 mm, manufacturer of Kitsuna 32 mm / 20 mm / 18 mm, Ø flange: 73 mm, Ø ball cage: 48 mm, pitch: 5 mm, used, good condition, 100% functional Bckgexh7jp more
6

Heavy Duty Lathe STANKOIMPORT MOSKAU 1M635

Velen-Ramsdorf, GermanyGermany dealership location
6370 km
used
turning diameter over bed 700 mm turning diameter over slide rest 360 mm turning length 3000 mm spindle bore 72 mm spindle speed: 10 - 1250 U/min tailstock quill taper MT MK 5 quill adjustment 300 mm total power requirement kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,3 x 1,7 x 1,8 m Ciqzsjd with digtal read out system in y+x axis more
6

Heavy Duty Lathe SKODA SRM 125x6000

Willich, GermanyGermany dealership location
6368 km
1974
used
turning diameter over bed 1400 mm Giuzbqr turning diameter over slide rest 950 mm turning length 6300 mm faceplate 1250 mm steady 395 mm steady 620 mm roll stand workpiece weight 16000 kg workpiece weight in steadies max. 20000 kg total power requirement 37 kW weight of the machine ca. t dimensions of the machine ca. m more
6

Sawing Machine DANOBAT ASR 350 AF

Trippstadter Str. 110, 67663 Kaiserslautern, AlemaniaGermany
6535 km
2007
good (used)
OVERVIEW: Brand: DANOBAT Model: ASR 350 AF Application type: Sawing Machine type: Sawing Machine Availability: Immediately Ccscith Construction year: 2007 Production hours: 15000 Location: Spain Country of origin: Spain GENERAL DATA: Measurements width: 7500 mm Measurements depth: 4445 mm Measurements height: 2100 mm Machine weight: 9090 kg MAIN DRIVE: Spindle motor power: 7.5 kW WORKPIECE: Workpiece x: 350 mm Workpiece y: 350 mm MEDIA: Main electronic connection: 3... more
4
Rexroth R151033554 Transrollspindel 48317.004 L = 540 mm, Ø 31 mm / 20 mm / 18 mm, Ø flange: 73 mm, Ø ball cage: 48 mm, pitch: 5 mm, used, good condition, 100% functional Riuxago more
6
Type of fuel: Diesel Dqoxw08l Dimensions of cargo space: 42 x 18 x 24 cm Field of application: Construction Make of engine: Cummins QSK23-G3 EPA marked Water tank volume: 1400 l more
6

Heavy Duty Lathe SKODA SRM 125x11000

Willich, GermanyGermany dealership location
6368 km
1967
used
turning diameter over bed 1400 mm turning diameter over slide rest 1000 mm Cqzeipes turning length 11280 mm faceplate 1250 mm workpiece weight in steadies max. 20000 kg steady 395 mm steady 620 mm workpiece weight 16000 kg total power requirement 40 kW weight of the machine ca. t dimensions of the machine ca. m more
6

Heavy Duty Lathe SKODA SR 2000

Annaberg-Buchholz, GermanyGermany dealership location
6816 km
1975
used
turning diameter over bed 2400 mm turning diameter over slide rest 2000 mm turning length 8000 mm faceplate diameter 2000 mm max. workpiece weight between centres 60000 kg bed width 2190 mm Dvhekpz spindle turning speed range 0,45 - 90 U/min feed 0,18 - 5,6 mm/U steady 2 Stück total power requirement 60 kW weight of the machine ca. 47 t dimensions of the machine ca. 14,5 x 3,60 x 2,95 m Machine overhauled 2008 more
2
Scaravella 2510989 Transrollspindel L 635 mm =, Ø thread: 20 mm, pitch: 10 mm, Ø shaft: 25 / 20 mm, length shaft: 105 mm, Ø ball cage: 43 mm, Ø flange: 65 / 45 mm Bcjy02hvy0 more
6
Single column - eccentric press EBU type SK 35 M9qxl Masch. No P 5119271 built in 1971 Pressure 35 ton. Throat depth 220 mm 580 x 460 mm tabletop Abfalloch 210 x 170 mm Plunger area 350 x 175 mm Stroke adjustment 8-100 mm Stroke rate 130 strokes/min. Clamping pin hole ø 38 mm Table height above floor approx. 680 to 800 mm slide travel 70 mm Mounting height max. approx. 350 mm without intermediate desktop Transmission-2,2 kW Power supply 380 v, 50 Hz -pneumatic clutch / brake co... more
3

Heavy Duty Lathe SKODA SR 1600x6000

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 1600 mm turning diameter over slide rest 1200 mm turning length 6000 mm spindle diameter 100 mm speed 1,8 - 355 (x24) m/min voltage 380 V Gluqvvd total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
FRITSCH roll fix dough Sheeter can be folded out used Professional dough Sheeter on rolling Edelstahlcorpus suitable for extra thin dough like Yufka - or puff Long rolling device on the left side Flour shakers made of stainless steel 2 dough catch plates made of stainless steel 2 foot pedals Felt tapes Band width: 65 cm Band length: 136 cm Bcunkjcf2j Dough thickness from 0 to 42 mm The straps can be folded up. This saves space when not in use.   The machine is cleaned and ... more
12
This is our skin demonstration device Magic Skin 535 from the Milanese manufacturer Quick Pack Group Italy, it is in a very good condition, the manufacturer's warranty is in place. Its field of application is in the field of precision parts, crystal clear protective packaging that protects against moisture, dust, environmental pollution or breakage, suitable for thermoforming, for technical / medical and hygienic articles made of plastic or metal, tools, cutlery, office supplies, spare parts, et... more
6
ESR Pollmeier BN 6035.979 frequency converter, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Neg9f more
2
Small radial drilling machine in very good condition, ready to use and live to see! S O N D E R P R E I S! Manufacturer Stankoimport Type 2M53Y Built in 1981 Tool holder MK4 Speeds from 35.5 to 1,400 rpm in 8 steps Number 6 feeds, maximum feed force 800kp Maximum drilling capacity in steel mm 35 mm RADIUS max 1.000mm 9gg8fgo0x RADIUS min. 290mm Maximum distance between spindle end face and base plate 1,120 mm Maximum distance between spindle end face of table 630 mm Column diameter... more
6
Frequency converter, frequency converter, drive inverter, Perske DAO 14-2 / 30 DWO 14-2 Input 380 V 50 Hz Output 16kw 50 hz Bak0vls20m Output 35 KVA 50 / 100hz -Weight 160kg Dimensions 750/350/300 mm more
2
2 pieces conveyor screws / cement screws manufacturer: WAM diameter: 350mm; Length: 6.900 mm; motor: 15,0 KW; in perfect condition was in less use ready for operation IMMEDIATE AVAILABLE LOCATION: Bad Dueben/East Germany PRICE PER EACH; EX LOCATION: 3.950,00 EUR (net) offer and all price are net and ex stock without guarantee and/or guarantee, Ciq9ut2 mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale ... more
3

Plane-milling machine USSR, Soviet Union, Uljanovsk UF5225

/ Köln, GermanyGermany dealership location
6413 km
2001
good condition (used)
Length of table working surface, 8000 mm Width of table mm 2500 Bcafyefuon Moving table X, Y, Z, mm 8700_3000_1950 Min spindle speed rpm: 56 Maximum spindle rotation frequency, rpm: 560 Power, kW: 45 Weight of machine, kg: 146700 Dimension (LxWxH) mm: 21700 x 8870 x 7200 more
6
ESR Pollmeier BN 6035.979 frequency converter, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Grt7txh more
15
The engine comes from the spare parts inventory of a business resolution. He is in stock. Outwardly he is dusty due to storage. . Technical data Electric motor: MDSKSRS071-33 Manufacturer: Lenz Arzen No. 0581224 Year of constr.: K.a. Voltage: 325V 3 ~ IP 54 : KW 4,6 Speed: 3600 1/min Torque: 12.3 NM M0 14.8 nm Donors: RS0119955791 Current: 10 A max 45 A Wellw: 14 mm Original price: ᐳ1000 € Weight: 12.5 kg Da8pmjayg More on offer: -Control transformer transformer EST 1,6 16... more
8

Multisaw GABBIANI SR 350 GABBIANI SR 350

Moujsz 51A, 83-334 Miechucino, PLPoland
6912 km
good condition (used)
- Machine in stock - After the technical review - Very good condition   TECHNICAL PARAMETERS : Nbzcl - track width 300 mm - cutting height 120 mm - 80 mm spindle - 38 kW engine power - smooth regulation of the feed speed on the inverter - maximum diameter of discs 350 mm - central lubrication of the caterpillar - Italian production - 380V power supply - diameter of the nozzle 150 mm The caterpillar is in very good condition. A machine worth recommending It works v... more

Skoda SR Ø 2000 x 6500 mm

Deinze, BelgiumBelgium dealership location
6190 km
used
4 guideways 2 steadies included smallest dia with smallest steadie: 275 mm biggest dia with smallest steadie: 715 mm smallest dia with biggest steadie: 570 mm Vrbx2y biggest dia with biggest steadie: 1015 mm ----- В комплекте 2 диаметр малой люнеты: 275 мм Наибольший диаметр малой люнеты: 715 диаметр большой Ð... more
1
SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Bavzgca3wr Workplace lighting (optional) Technical data... more
6
ESR Pollmeier BN 6035.979 frequency converter, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Wvmtg more
4
Nominal force: 35 to Stroke adjustment: 8-100 mm Tappet adjustment: 70 mm Number of strokes per minute 130 Yjns2tbt Power requirement 3 HP Throat depth: 150 mm plunger surface: 350 x 200 mm table size: 600 x 400 mm height above ground: 700 mm machine weight approx. 3.5 t adjustable table more
4

Heavy Duty Lathe SKODA SRM 100x8000

Mohna /3 36, 87-100 Toruń, PLPoland
7020 km
1976
excellent (used)
By2h09ri Heavy Duty Lathe SKODA type SRM 100x8000 Manufacturer: SKODA New in: 1976 Technical condition very good – still under power With all accessories which you see on the photos Technical details - turning diameter over the bed 1000mm - turning diameter over support 710mm - distance between centers 8000 mm more
6
Manufacturer: on the Br2thcvx8 Year of construction: 2002 Abmessunngen: 7700 x 3100 x 3100mm capacity: 2500 kg more
1

Sweeper sitting Motor Nilfisk Alto Floortec R 360 SR 1000 S AKKU BENZIN

Jagstzell-Dankoltsweiler, GermanyGermany dealership location
6711 km
2015
used
Nilfisk Alto Floortec R 360 gasoline or battery with brooms +++ just please no obligation ask another +++ Krq9j more
1
SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Sswrzo Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure 3-stage filter type disposable filter filter surface approx. 12 m² of filtration efficiency > 99% filter material glass fibre welding smoke off vagina c... more
2
SERVOPACK YASKAWA CACR-SR15BE 12G-E used, tested exchange price !! Warranty 6 months Prd0oe more
6

Borringmill Floor type Skoda SKODA S-35-C

Etten-Leur, NetherlandsNetherlands dealership location
6240 km
used
Floor type Make: Skoda Type: W160HC Control: Fagor D.R.O. 3+3 axes Spindle diameter: 160 mm ø X: 15.000 mm Y: 4.000 mm Z/W: 1.600 / 1.250 mm Intake: ISO50 Turningtable: SKODA S-35-C Cap. turningtable: 35 ton Dimensions turningtable: 2.800 x 3.150 mm Additional option floorplate: 3x 1.880 x 5.615 mm : 3x 1.880 x 6.400 mm 3 square milling head 1 Facing support Q97vt0edy Stock Number: kot150 more


kobelco sk...
daily

New machines via email!

Stay updated!

to

to

Edit search
KOBELCO SK 35 SR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close