Used Kramer A-Maut Ii 1000 for sale (62)

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control Nsdpfxsfnabyo Agzodf - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: used, Year of construction: 1987, Kramer type A Maut III 2500 folding machine Effective length: 2500mm Maximum sheet thickness: 2.5mm Ndodpferhk Tzsx Agzof

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Ndsdjvaatfjpfx Agzef Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW Ndjdpfjy Np Asx Agzjf below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. Ndsdjxcpd Uepfx Agzsf The machine is powered and can be tested. Please contact us to arrange a viewing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, degree of automation: semi-automatic, actuation type: electric, working width: 3,000 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 2 mm, back gauge: 1,150 mm, overall weight: 3,900 kg, total length: 4,300 mm, total width: 2,400 mm, total height: 1,700 mm, type of input current: three-phase, stroke length: 280 mm, Equipment: emergency stop, foot remote control, We are selling our folding bending machine Kramer AMaut III 3000/2 due to a new purchase. The machine has a motorized back gauge from 10 mm to 1150 mm. The top beam can be equipped with different bending bars, including a 135° gooseneck bar with 150 mm free edge, a flat 135° bar, and a 165° bar. Further details can be requested. The bending machine is available immediately. The bending machine can be tested on site with us. The machine is sold excluding any warranty or guarantee. A return is not possible. 'Sold as seen' applies. Njdpfxjwr D Ivj Agzjdf Transport must be organized by the buyer.

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Njdpfx Agjww I Tmszodf

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm - stand projection 100 mm - working height 880 mm - Front angle stop Njdjrci T Eepfx Agzsdf - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW - E. foot switch - Space requirement including back gauge, without front support arms - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg Ndedpfx Aod Rbz Tsgzjf space needed: 3050 x 800 x 1350 mm

Condition: good (used), Year of construction: 1990, Type RHM III 120 v-1000 Roll diameter: 120 mm Working length: 1000 mm Sheet thickness: up to 5.0 mm 400 Volt Kramer Maschinenbau GmbH Description The features described for the RH II series also apply to the RHM III series. These round bending machines are designed for continuous operation under maximum load. The lower shaft is adjustable via a worm gear. For models RHM III 90 – RHM III 130, the geared brake motor is flange-mounted on the outside, while models RHM III 140 to RHM III 180 are equipped with an internally flange-mounted geared brake motor. All motorized machines come standard with electrical safety control. Operation for forward and reverse is carried out using a double footswitch. Additional features on type RHM III: ▪ Powerful thermally protected geared brake motor ▪ Electrical safety control ▪ Convenient double footswitch for forward/reverse ▪ Three-shaft drive (particularly recommended for thin sheet work) ▪ Drive system with two operating speeds ▪ Overload protection via slipping clutch ▪ Motorized rear shaft adjustment Ndodsx Niu Nopfx Agzef ▪ Motorized lower shaft adjustment Standard equipment: ▪ Gear side drive ▪ Three-shaft construction ▪ Asymmetrical shaft arrangement ▪ Upper shaft can be swung out to the front ▪ Adjustment of lower and rear shafts via handwheel ▪ Conical bending by tilting the lower and rear shafts ▪ Initial bending capacity equals round bending capacity Optional equipment: ▪ Device for conical rolling ▪ Upper shaft with grooved edge ▪ Lower and rear shafts with wire groove ▪ Surface-hardened shafts ▪ Ground shafts

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm Ndodpfx Asfpa Ihogzef • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Nsdpfxsxbtrto Agzodf Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: good (used), Year of construction: 1984, machine/vehicle number: 43910, Offer 25177 Technical specifications: - Max. working width 1030 mm - Max. material thickness at 40 kg strength per mm²: 1.50 mm - Roller diameter 65 mm Ndjdpfxowmngxo Agzsf - Swiveling top roller - Asymmetrical roller arrangement - Rear roller tiltable for conical rounding - Front roller adjustable with lever and eccentric - Bottom roller + rear roller with wire insert groove - Electric foot switch for left-right rotation - Drive 400 V - Space required approx. W 1500 x H 1250 x D 500 mm - Weight approx. 300 kg

Condition: not inspected (used), Kramer plate rolling machine / three-roll plate bending machine Type: RHM III 75/650 Max. sheet thickness: 3.5 mm Bending width: 650 mm Right & left rotation Heavy-duty The machine comes from a company closure, offered at a special price, untested. Ndodpfx Ajx An A Asgzsf

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Njdpfx Agsrfwyrjzodf

Condition: used, Year of construction: 2016, operating hours: 2,640 h, Equipment: all wheel drive, Engine: 4-cylinder Yanmar turbo, hydraulic quick-change system, pallet fork, bucket capacity approx. 0.75 cbm, all-wheel steering, tires approx. 60%/70% good, vehicle can be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. Ndodpfx Agov U Icqozjf We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 120 l, color: yellow, overall weight: 6,100 kg, maximum load weight: 2,900 kg, lifting power: 4,300 kg/m, lifting height: 3,200 mm, tire size: 405/70-24, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 1.15 m³, Year of construction: 2024, operating hours: 3 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, gripper hydraulics, head guard, traction control, === MAIN SPECIFICATIONS === Year: 2024 Operating hours: 3 h Operating weight: 6,100 kg Max tipping load: 4,300 kg Bucket capacity: 1.15 m³ Drive system: Hydrostatic Four-wheel steering: Yes Differential lock: Yes (100% connectable) Quick coupler system: Yes Cabin: Closed Heated cabin: Yes Air conditioning: Yes Tyres: 405/70-24 – rough terrain profile Engine manufacturer: Deutz Engine power: 55.4 kW (75 HP) Emission class: Stage V Hydraulic flow: 84 l/min CE certification: Yes === HIGHLIGHTS === New / unused 2023 model with only 3 operating hours Powerful Deutz Stage V engine (75 HP) Closed cabin with heating and air conditioning Mudguards, beacon and standard bucket included CE-certified with full documentation Ready for immediate transport and operation === CONDITION === New / unused – fully inspected and in excellent condition No damage, no faults Inspection possible on request === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price: €69,500 (EXW / excl. VAT) The Kramer 8115 delivers high stability, strong lifting performance and excellent manoeuvrability. With its 75 HP Deutz Stage V engine, hydrostatic drive and four-wheel steering, it is a powerful and efficient machine suitable for construction, agriculture and industrial use. Fully CE-certified and available directly from stock. === DELIVERY === Nedpfx Agexb Swbjzedf Crane loading available on request Flexible worldwide transport options Professional handling by the Collé Rental & Sales logistics team

Condition: used, functionality: fully functional, Mechanical guillotine shear Manufacturer: Kramer, type 2050 x 3mm Technical data Ndedpfx Agjx Dbqvezjf Brand: Kramer Working length: 2050 mm Sheet thickness: 3 mm steel Dimensions: L 2.5 x W 1.4 (plus support arms) x H 1.25 m Weight: approx. 2 t Equipment - Manual back gauge 500 mm - Support arms All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, power: 75 kW (101.97 HP), gearing type: semi-automatic, fuel type: diesel, color: yellow, overall weight: 9,000 kg, empty load weight: 7,800 kg, maximum load weight: 1,200 kg, axle configuration: 4x4, number of seats: 1, first registration: 12/2007, brakes: engine braking, suspension: other, operating hours: 9,750 h, total length: 6,620 mm, driver cabin: day cab, Equipment: all wheel drive, No documents, no road approval. Non-binding offer – subject to change and prior sale – sale is made excluding any warranty – all information is provided without guarantee! Company holidays: Our business is closed from 20.12.2025 to 04.01.2026. We wish you happy holidays and a happy new year. Ndjdpfxjxxld Ne Agzef

Condition: used, operating hours: 2,993 h, Equipment: all wheel drive, Kramer Wheel Loader 5065 Operating hours: 2993 kW: 34.30 Payload front: 3200 kg Payload rear: 3200 kg Year of manufacture: 2021 Fork and bucket included Ndodpfx Aex Iankogzsf

Condition: good (used), functionality: fully functional, KRAMER Cold Storage System – Complete System with Central Refrigeration Unit (Fixed Installation) Njdpfx Agex H Nkrezodf A high-quality cold storage system from the KRAMER brand is available for sale, consisting of several refrigerated and deep-freeze rooms and just 5 years old. This system is designed for stationary installation (fixed building installation) and is ideally suited for catering, food processing, retail, or storage applications. Detailed Specifications: 1 Deep-Freeze Room External dimensions (WxL): approx. 459 × 293 cm Height: approx. 270 cm Equipment: Hinged door, air cooler 1 Dairy Refrigerated Room External dimensions (WxL): approx. 459 × 380 cm Height: approx. 270 cm Equipment: Hinged door, air cooler 3 Refrigerated Storage Rooms (Fruit & Vegetables) 1. External dimensions (WxL): approx. 446 × 293 cm, Height: approx. 270 cm 2. External dimensions (WxL): approx. 446 × 380 cm, Height: approx. 270 cm 3. External dimensions (WxL): approx. 445 × 673 cm, Height: approx. 270 cm All rooms equipped with hinged door and air cooler Technical Feature: Central Refrigeration Unit: A high-performance, shared refrigeration unit supplies all refrigerated and deep-freeze rooms. This ensures efficient energy use, easy maintenance, and uniform temperature management. Additional Information: • Well-maintained overall condition • Designed for permanent installation (fixed building integration) • Ideal for larger operations, supermarkets, commercial kitchens, or producers Note: • Inspection available by appointment • Each cold room can also be sold individually if required • The central refrigeration unit is also available separately • Price upon request

Condition: used, Cutter Manufacturer: Kramer Grebe Wetter Ndedpfxjx Dcfne Agzsf Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Condition: new, functionality: fully functional, power: 29 kW (39.43 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 48 l, color: yellow, overall weight: 2,070 kg, maximum load weight: 900 kg, lifting power: 1,400 kg/m, lifting height: 2,680 mm, tire size: 27x10.5-15, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.36 m³, Year of construction: 2022, operating hours: 1 h, Equipment: UVV, additional headlights, all wheel drive, cabin, gripper hydraulics, head guard, low noise, pallet forks, parking heater, soot filter, standard shovel, traction control, === MAIN SPECIFICATIONS === Year: 2022 Operating hours: New / Unused Operating weight: 2,070 kg Max tipping load: 1,400 kg Bucket capacity: 0.36 m³ Drive: Hydrostatic Four-wheel steering: Yes Differential lock: Hydraulic (optional) Quick coupler: Yes Cabin: Closed Heated cabin: Yes Air conditioning: No Tyres: 27x10.5-15 – off-road tread Engine manufacturer: Yanmar 3TNV86CT Engine power: 28.5 kW Emission class: Stage V Hydraulic flow: 30 l/min (standard) / 60 l/min (Powerflow) CE certified: Yes === HIGHLIGHTS === Brand new / unused 2022 machine Yanmar Stage V engine – efficient and reliable Compact dimensions with excellent manoeuvrability Quick coupler, proportional controls, full documentation included Njdpexct Dlefx Agzodf CE-certified and ready for immediate use === CONDITION === New / unused – fully inspected, no defects, 100% functional. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price: €35,000 “as is” (Optional: €37,500 with 12-month warranty) The Kramer 5040 combines compact size with impressive lifting performance and manoeuvrability. Ideal for construction, agriculture, municipal services and industrial applications. CE-certified and immediately available. === DELIVERY === Crane loading available on request. Worldwide transport arranged by Collé Rental & Sales.

Condition: used, Year of construction: 2020, operating hours: 6,523 h, fuel type: diesel, Equipment: cabin, head guard, * Radio Nsdpfx Aewmyd Nsgzodf * Air conditioning * Front-wheel steering * All-wheel steering * Crab steering * Deutz diesel engine * Central lubrication system * Power: 115 kW * Year of manufacture: 2020 * Weight: 8,750 kg -----Internal vehicle number: 11031----Subject to errors and prior sale

Condition: like new (used), Meat grinder K+G Wetter Njdpfx Agox Aydlozedf Operating voltage: 400V / 50Hz Control voltage: 24V Power: 38kW