Folding Machine

KRAMER AMS 1000/1,5

Condition: good (used), working width: 1,050 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, overall weight: 220 kg, working length: 1,050 mm, max. working width: 1050 mm for metal sheets up to: 2 mm opening width top clamping bar: 60 mm Ffjdsui Ikrepfx Afnsu weight: 220 kg space needed: 1380 x 550 x 990 mm

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg - mobile Fsdpfx Ajt H I Aqjfnjfu

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Fedowi N T Ejpfx Afnsfu Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Year of construction: 1980, condition: good (used), Offer 22501 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1,5 mm - man. backgauge adjustable up to 550 mm - front angle stop - sheet holding-down device - table size 1100 x 650 mm - working height 900 mm Ffodpfx Afjkzik Hsnju - space requirement approx. W 1800 x H 1450 x D 850 mm - weight approx. 400 kg - mobile

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm Ffodpexllirefx Afneu vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm video klik hier Motor power: 1,5 kWt

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure Fedpottah Refx Afnjfu → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, 890*1100 mm 250 kg/m² €16.15 500 kg/m² €18.02 750 kg/m² €22.50 If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used shelving as well as accessories and are happy to assist you with your planning. Additional accessories available, such as: Ffsdpegqw A Hefx Afnju Frame, corner and collision guards, push-through protections, chipboard panels, grating, rear mesh panels, depth bars supplied. D7sz8e0 Shipping: Please request the freight costs by providing your postal code, location and the desired quantity of items. Other services offered: Planning, shelf assembly/disassembly, purchase/sale Subject to change and errors in technical specifications, information and prices. Intermediate sale reserved!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, BPR BA 35 CNC Three-Roller Ring Bending Machine, Hydraulic AS-NEW CONDITION MACHINE Shaft diameter: 35 mm Roller diameter: mm on request Shafts made of high-strength steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft rotation (variable): 0-30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roller Fsdpfsxivfxex Afnefu Three powered rollers with smooth surface BPR Probending CNC electronic control system Hydraulic cylinder pressing force: 5,500 kg Working pressure: 190 bar

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Fjdox I Rdispfx Afnofu Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance swing bending machine RAS 67.30 with single-program control comes from first ownership. Bending capacity: 3200 x 2.5 mm Fodpfjxmi Hdjx Afnefu Drive power: 3 kW Machine weight: 3800 kg Includes pre-selection of bending angle via rotary potentiometer, second footswitch for two-person operation, continuous 45° upper bending bar, segmented/split and raised upper bending bar H = 100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany