Mot.Positionierer/welding Swivel + Tilt table

ESAB xxxx

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Crsdpfx Aeh In Thscpjh Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW Csdpfx Asd Nmx Tjcpjrh

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm Cjdegvwgcjpfx Acporh weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Codpfxoxq Eyue Acporh

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Codpfx Aetmqi Djcperh The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: Codsrbz T Nspfx Acpsrh - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Standard equipment Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Crodovxhznepfx Acpeh Operating manual (DTR) Included CE declaration Yes

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted. Crodefn Aqmjpfx Acpsh

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: Crodpfx Aou Et Nbscpjh - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm weight 5,5 t Crjdpfxoiiii Ss Acpoh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++