Kramer 1150 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
8
Wheel loader Kramer 1150, built in 2007, 4350 operating hours, folding shovel, fork, Ser.Nr. 347020164 Bcarjvxuvf more
1
Elect./Voltage: 380 V, 50/60 Cy, 3 Ph. Bbuuyol9ij COSTA ACCT 1150 Veneer Sander;3-Head, 1,150 (45.3") width cap.; Sealer sander with (1) segmented finishing platen with variable abrasive belt speed and (2) abrasive belts with electronic tracking and pneumatic [...]: -- 1st Head: Steel Contact roller, spirally grooved, with 23 HP motor, Pneumatic grit set and One speed single rotation. -- 2nd Head: Rubber Contact roller 85 Shore, spirally grooved, with 23 HP motor, Pneumatic grit set and On... more
6
We offer you, an almost unused bending machine from the manufacturer Kramer. The machine went for a job and was stored since! Machine runs flawlessly. Bending length: 2500 mm Ba0wsvadwv Roll diameter 140 mm Material thickness: 2, 5 mm Weight: 2T The machine can be performed live with us in the camp. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full cont... more
4
sheet width 2000 mm plate thickness 2 mm pre-bending 4 mm roll diameter 80 mm Onttjqh7 Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
4
Maximum cutting length: 3000 mm Maximum sheet thickness: 6 mm steel Electrically adjustable back gauge up to 1000 mm with digital display M9gej Page fence and table extensions Weight: approx. 6000 kg more
6
Type of fuel: Diesel Field of application: Construction Nbqc2 Lift height: 400 cm EPA marked more
1

MF25_1150_Single

Olfen, GermanyGermany dealership location
6407 km
used
Iwfk9qv more


kramer 1150
daily

New machines via email!

Stay updated!
6
Type of fuel: Diesel Field of application: Construction Make of engine: Mitsubishi S4Q2-61SD EPA marked Transport dimensions (LxWxH): 1.97x0.8x1.34 Wvzs0 more
5

KRAMER & DUYVIS

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bcxtmtzcrz more
3
table length 1100 mm table width 1150 mm table load 0,50 t Plate thickness 250 mm table height over floor 900 mm number of T-slots 5 T-slot - width 85 / 50 mm total power requirement kW weight of the machine ca. 1,20 t Fqzyplr dimensions of the machine ca. 1,20 x 1,20 x H1,00 m more
4
Pressure:0200 t distance between columns:1910 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1900 x 1150 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:300 mm die cushion area:1500 x 950 mm table height over floor:800 mm side window:1000 mm ram surface:1900 x 1100 mm return capacity:36 t speed down:400 mm/s speed up:170 mm/s working speed:30,5 mm/s oil volume:1500 l height over floor:4,85 m height beneath floor:2,6 m ... more
6
Type of fuel: Diesel Field of application: Construction Make of engine: Mitsubishi S4Q2-61SD Bag9g2 EPA marked Transport dimensions (LxWxH): 1.97x0.8x1.34 more
2

AVITEQ OA-1150/350-UVB

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bcxsybx8lu more
3
Ingersoll beam angle clamping table 1150 x 1050 x 1325 mm from Ingersoll plank producer W202 5-axis machining center, used, normal wear, 100% functional, included with com. photos attention: Please separately request cost of packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Dwbgnq more
6
Type of fuel: Diesel 29l9p03 Field of application: Construction Make of engine: Mitsubishi S4Q2-61SD EPA marked Transport dimensions (LxWxH): 1.97x0.8x1.34 more
6

Radlader Kramer 350

Winterberg - Siedlinghausen, GermanyGermany dealership location
6498 km
2012
used
I9nbyeu more
4
Daniel M 5000 M ECU F 21150, serial number according to the photo, used, normal wear, 100% functional Haacor3sc more
6

Wheel loader Kramer 350

More Kramer 350
Sittard, NetherlandsNetherlands dealership location
6340 km
2011
used
Field of application: Construction Power: 27 kW (37 HP) Make of engine: Yanmar 3TNV88 Juv8o3 EPA marked Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Transport dimensions (LxWxH): 4.08x1.2x1.98 more
6
Type of fuel: Diesel Field of application: Construction Make of engine: DAF DT 615A EPA marked M7wo32 Transport dimensions (LxWxH): 2.4x1.04x1.46 more
5
Maximum bending length: 1000 mm 8kojctvy3 Maximum sheet thickness: 2 mm steel Out pivoting clamping beam Various bending Rails (segmented upper beam rail, Rod, etc.) more
9
AUTOMATIC CALIBRATING SANDING MACHINE Brand: Costa Bczkiixzf3 Model: CCT - 3 1150, CE Conditions: Used Delivery: Prompt Description: Monolithic welded steel frame. The thickness of the steel guarantees the solidity and stability of the entire structure. The thick, anti-wear steel work bed, guarantees precision and solidity for any job. Technical features • Fixed head • Working width mm.1150 • Min/Max working thickness mm. 3 - 160 • Sanding belt width mm. 1180 • Sanding belt leng... more
6

Wheel loader Kramer 5075

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 35 kW (48 HP) Ggb9urziy Make of engine: YANMAR EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 more
4
sheet width 1020 mm plate thickness 1,25 mm distance between columns 1100 mm Bhn3oqg0 total power requirement manuell weight of the machine ca. 195 kg. range L-W-H 1500x500x1200 mm more
6
Type of fuel: Diesel Field of application: Construction Bcs0gek9hx Make of engine: Mercedes MB 846 A EPA marked Transport dimensions (LxWxH): 3.6 x 1.33 x 1.95 more
4
"Veneer splicing machine KUPER FW 1150 Opening width mm: 1.150 Veneer thickness min mm: 0,3 Veneer thickness max mm: 3 Feedrate max m/min: 30 Continuously variable feed: Yes Bcqe8ub8jx Joint: Glue thread Glue thread heater: electrical Total connection kW: 1,5 Required space lxwxh: 2130x900x1600 Weight kg: 470 Operating status: dismantled/ stored" more

Folding machine KRAMER HMS 1000/1,25

Wiesbaden, GermanyGermany
6534 km
ready for operation (used)
max. working width: 1020 mm for metal sheets up to: 1,25 mm opening width top clamping bar: 85 mm 2raqri adjustment bending cheek: 20 mm weight: space needed: 1550 x 620 x 1150 mm more
6

Wheel loader Kramer KL10.5

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 23 kW (31 HP) Make of engine: YANMAR EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 E9iegaw more
13
Control system: COROBS - W7 Operating time IPC (666 days 02:01:17) Operating time PLC / CNC (665 days 08:16:22) Time Interval Running (80 Days 06:19:14) Time slice in operation (0 days 00: 00:00) Max. Tube weight: 3000 kg Clamping range: 50-1150 mm Diameter of the pendulum: 50-1150 mm Pendulum range for the welding phase in plasma: 45 degrees Burner rotation: 380 degrees Min. Cutting area in front of the chuck: 300 mm Max. Cutting area in front of the chuck: 6000 mm Rotat... more
6
Hand - folding machine KRAMER type AMS 650 x 1.5 Built approx. 1985 Working length 650 mm Sheet thickness at 40 kg / mm2 1.5 mm Upper cheek opening approx. 60 mm Tglgsf2n CA bending beam adjustment 0-25 mm Bending angle 0-180 ° -Upper cheek adjustment via hand crank -Screw rail for the bending flange -one-piece focusing rail 135° Dimensions L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition more
6

Compressor Sullair 900 / 1150 XHADTQ

Waregem, BelgiumBelgium dealership location
6190 km
2014
used
Field of application: Construction Make of engine: Caterpillar C15 EPA marked Compressor type: Screw compressors Transport dimensions (LxWxH): 5.9x2.25x2.4 Gpisdyw7g Working pressure: 34.5 / 25 bar more
5
Jacobson double Abkantmaschine 6, 40 m * 1.25 Control: CNC 8000 Vollautumat - touch screen control Pickup from the factory Available from end of September 2018 Bcuidwa370 Weight: 7500 kg Serial number: K 12120 Operating hour: 2100 hrs year: 2012 You can see all technical information from the image. more
6

Wheel loader Kramer 5085

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 55 kW (75 HP) Make of engine: Kohler Xobnd2ux EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 more
5
Veneer glueing machine Kuper Zick-Zack-Glueing type: FW 1150 machine-no. 2910 8172 arm length 1150 mm infeed speed stepless adjustable 10 – 30 m/min. for veneer thickness 0,4 – 3 mm B2dcipyj motor 1,5 kW dimension 2130 mm x 750 mm weight 520 kg more
6
Swaging machine KRAMER type SBMM 56 Fabr. No. 20417 built about 1980 Material thickness 1.25 mm Roller medium spacing 58 mm Roll diameter 60 mm Shaft ø 24 mm Shaft diameter 39 mm Throat depth 130 mm Motor output 0,75 kW Power supply 400 Volt, 50 Hz -electric foot switch for right - and left-hand rotation Kphnpun2 -adjustable stop with wear plates -different rollers Dimensions L x W x H 700 x 350 x 1200 mm Weight 170 kg good condition more
6

Compressor Sullair 900 / 1150 XHADTQ

Waregem, BelgiumBelgium dealership location
6190 km
2012
used
Field of application: Construction Make of engine: Caterpillar C15 EPA marked Compressor type: Screw compressors Transport dimensions (LxWxH): 5.9x2.25x2.4 Drjsavjf Working pressure: 34.5 / 25 bar more


kramer 1150
daily

New machines via email!

Stay updated!

to

to

Edit search
KRAMER 1150
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close