Kramer 2506 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Maximum bending length: 1000 mm Maximum sheet thickness: 2 mm steel 8kojctvy3 Out pivoting clamping beam Various bending Rails (segmented upper beam rail, Rod, etc.) more
6
We offer you, an almost unused bending machine from the manufacturer Kramer. The machine went for a job and was stored since! Machine runs flawlessly. Bending length: 2500 mm Ba0wsvadwv Roll diameter 140 mm Material thickness: 2, 5 mm Weight: 2T The machine can be performed live with us in the camp. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full cont... more
4
sheet width 2000 mm Onttjqh7 plate thickness 2 mm pre-bending 4 mm roll diameter 80 mm Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
6
Front axle: Tyre size: 12-16.5/10 Rear axle: Tyre size: 12-16.5/10 Type of fuel: Diesel Field of application: Construction Power: 54 kW (74 HP) Make of engine: Deutz TD2,9 L4 Lift height: 600 cm EPA marked Emission level: Stage IIIB Transport dimensions (LxWxH): 3.84x1.81x1.92 Sszhbs more
5

KRAMER & DUYVIS

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bcxtmtzcrz more
4
Maximum cutting length: 3000 mm Maximum sheet thickness: 6 mm steel Electrically adjustable back gauge up to 1000 mm with digital display M9gej Page fence and table extensions Weight: approx. 6000 kg more
6

Radlader Kramer 350

Winterberg - Siedlinghausen, GermanyGermany dealership location
6498 km
2012
used
I9nbyeu more
6
Front axle: Tyre size: 4540 Rear axle: Tyre size: 4540 Type of fuel: Diesel Field of application: Construction Power: 46 kW (63 HP) Lift height: 600 cm Bbpfqh7ruh EPA marked more


kramer 2506
daily

New machines via email!

Stay updated!
6
Type of fuel: Diesel Field of application: Construction Make of engine: Perkins 2506C-E15TAG EPA marked EPA marked Transport dimensions (LxWxH): 4.49 x 1.45 x 2.5 Bcwb00ysxq more
4
sheet width 1020 mm plate thickness 1,25 mm Bhn3oqg0 distance between columns 1100 mm total power requirement manuell weight of the machine ca. 195 kg. range L-W-H 1500x500x1200 mm more

Folding machine KRAMER HMS 1000/1,25

Wiesbaden, GermanyGermany
6534 km
ready for operation (used)
2raqri max. working width: 1020 mm for metal sheets up to: 1,25 mm opening width top clamping bar: 85 mm adjustment bending cheek: 20 mm weight: space needed: 1550 x 620 x 1150 mm more
6
Hand - folding machine KRAMER type AMS 650 x 1.5 Built approx. 1985 Working length 650 mm Sheet thickness at 40 kg / mm2 1.5 mm Upper cheek opening approx. 60 mm CA bending beam adjustment 0-25 mm Bending angle 0-180 ° -Upper cheek adjustment via hand crank -Screw rail for the bending flange -one-piece focusing rail 135° Tglgsf2n Dimensions L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition more
6
Type of fuel: Diesel Field of application: Construction Lift height: 400 cm Nbqc2 EPA marked more
5
Length: 2030 mm Thickness: 10 mm Hylxugz Dimensions: CA. L B 3.50 x 1.50 x H 2, 65m Weight: approximately 8700kg Bending angle adjustment via potentiometer all data without guarantee! more
2
used attachments for Kramer wheel loader 1 pcs Schouvel 1 pcs fork available: immediate location: Dresden/ East Germany Price: 1.900,00 EUR (net/ ex location) Ney72 offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale _____ IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON. more
8
Technical data: -maximum working width 1025 mm -maximum thickness at 40 kp / mm² strength 3.75 mm -Electronically preselected bending angle -Automatic sequence control for a complete work flow Hand foot switch Yrshkk -highest work setting of the upper cheek 250 mm -biggest opening / lifting of the upper beam 350 mm -Height - adjustment of the beam 30 mm -the lower beam 90 mm -Crowning in bending beam rail -Upper cheek drive 400 V / 1,5 kW -Bending beam drive 400 V / 4,... more
6
Swaging machine KRAMER type SBMM 56 Fabr. No. 20417 built about 1980 Material thickness 1.25 mm Roller medium spacing 58 mm Roll diameter 60 mm Shaft ø 24 mm Shaft diameter 39 mm Throat depth 130 mm Motor output 0,75 kW Power supply 400 Volt, 50 Hz -electric foot switch for right - and left-hand rotation Kphnpun2 -adjustable stop with wear plates -different rollers Dimensions L x W x H 700 x 350 x 1200 mm Weight 170 kg good condition more
3

MOT. Crank shear KRAMER TM II a 2050 x 5,5 mm

Staufenberg, GermanyGermany dealership location
6563 km
1977
good (used)
MOT. Crank shear Fabr. KRAMER type TM II a Masch.# 35377 built in 1977 Technical data: maximum usable length 2050 mm Gr. Thickness of 5.5 mm Table width 350 mm Throat depth 100 mm Stop adjustment on the table 1050 mm Stop adjustment on the blade 550 mm Number of strokes of the blade 20 HpM. 7.5 kW Weight approx. 3550 kg with -hand-adjustable Backgauge -Angle stop front Mnmgf -Table extensions -Foot switch used from training workshop more
6

Wheel loader Kramer 350

More Kramer 350
Sittard, NetherlandsNetherlands dealership location
6340 km
2011
used
Field of application: Construction Power: 27 kW (37 HP) Juv8o3 Make of engine: Yanmar 3TNV88 EPA marked Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Transport dimensions (LxWxH): 4.08x1.2x1.98 more
1

Folding machine (3.000 x 2 mm) Kramer AMaut III 3070

Niedersachsen, DeutschlandGermany
6518 km
1977
ready for operation (used)
Folding machine (3.000 x 2 mm) SMA-REF-6251 Type: bending presses H8km0qn Manufacturer: Model: AMaut III 3070 Year: 1977 Working range: Working width: 3.000 mm Sheet thickness: max. 2 mm Condition: ready for action under power Location: Northern Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
8
Clean plate shear Kramer performance up to 2 mm steel - aluminium ca 3 mm sheet lengths over 1 m hand and foot operated light over the machine - something just dismantled because of transport depth stop 500 mm arms front to the sheet tray (dismantled for transport) Ycf8d7y New optional onsite spare blade plate shelf more
8
Wheel loader Kramer 1150, built in 2007, 4350 operating hours, folding shovel, fork, Ser.Nr. 347020164 Bcarjvxuvf more
4

Mot. Folding Machine KRAMER AMaut III 2500 x 2,5

Staufenberg, GermanyGermany dealership location
6563 km
1990
defective spare-parts repository (used)
MOT. Folding machine Fabr. KRAMER type AMaut III. Masch.#. 48296, built in 1990 Technical data: Xinxgqauo Atbeitslaenge 2540 mm maximum sheet thickness 2,5 mm Gr. Opening of the upper beam 350 mm Adjustment of sub - and bending flange 90 mm 4,0 kW Duration of a workflow 7.0 seconds. Weight approx. 3750 kg External dimensions approx. 3600 x 1000 x 1500 mm used, has diminished as spare parts or to self build more
6

Wheel loader Kramer 5075

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 35 kW (48 HP) Make of engine: YANMAR EPA marked Ggb9urziy Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 more
5

roll bending machine Kramer RSL 2000 / 120 / 2,5

Erftstadt, GermanyGermany dealership location
6410 km
1979
used
3 rolls bending machine motor. 9jbm2td8i Sheet width 2000 mm Sheet thickness 2,5 mm Approximate weight: 1250 kg more
6

MOT.-table severity KRAMER TM I a 1000/2.5

Odenwaldstr. 63, 63322 Rödermark, DEGermany
6579 km
1982
good (used)
Technical data: -maximum working width 1040 mm -maximum material thickness (at 40 kg strength) 2.5 mm Bb7nsojbwr -Table width 300 mm -Stand extension 100 mm -Working height 880 mm -front angle stop -2 additional front support arms -Rear gauge manually adjustable 5-550 mm -Stroke rate approx. 52 / min -Drive 400 V / 3,0 kW -Foot switch -Space including Backgauge, without front support arms about B H 1500 x 1250 X 1400 mm -Weight approx. 1200 kg more
4
For sale a folding machine from the German brand manufacturer Kramer bending length about 3 m according to previous owner is 2 mm sheet thickness very high quality construction (cast) Weight ca. 2.7 t forklift available site 97291 ca 150 equipment always in stock Pcmhdbct more
4

Folding machine Kramer 2000

Dornierstr. 3, 71272 Renningen, DEGermany
6644 km
ready for operation (used)
Folding machine The technical data can be found in the photos. Machine can be visited by appointment Iqgszqr more
2

Motor-driven folding machines KRAMER AMaut II 2000x2 mm

Staufenberg, GermanyGermany dealership location
6563 km
1985
ready for operation (used)
Motor-driven folding machines Fabr. KRAMER type AMaut II. Masch.#. 45858, built 1985 Djjk2pb Technical data: Atbeitslaenge 2025 mm maximum sheet thickness 2.25 mm KL. The bug width 5 x s KL. Inner radius 1.5 - 2 x s Adjustment of sub - and bending flange 90 mm for round bending 90 mm highest working position of the upper beam 190 mm Gr. Opening of the upper beam 290 mm Power 3,0 / 1,1 kW Duration of a workflow 7.0 seconds. Weight approx. 2450 kg External dimensions approx. 3000 ... more
6

Wheel loader Kramer KL10.5

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 23 kW (31 HP) Make of engine: YANMAR EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 E9iegaw more
5

Center lathe Stanko 700 x5000 mm PT2506

Etten-Leur, NetherlandsNetherlands dealership location
6240 km
used
Center lathe Make: Stanko 700øx5.000 Type: PT2506 Distance between Centers: 5.000 mm Centerheight: 350 mm Swing over bed: 700 mm Swing over support: 400 mm Spindle boring: 72 mm 2co8tssyh 3-jaw: 315 mm ø Steady rest: 2 x 380 mm ø With 2-axle digital Stock Number: draai376 more
9
Wheel loader Kramer 320, 4 x 4, year of construction 1995, 7900 hours, folding shovel, fork, Ser.Nr. 301560078, driving engine will lose some hydraulic oil Bbxv9z9oor more
6
Used Krämer & Grebe vacuum cutter capacity 500 litres Loading control cabinet, etc. Weight approx. 5000 kg. Ds3or0jwe Comes from a plant closure in Viersen due to acquisition of a reputable company! Three large factories of meat was only two adopted and one closed in Viersen! Krämer Grebe VSM 500 ran up to the plant closure. more
2

Heavy Duty Cylinder ENERPAC CLS2506 / 250t

Hamburg, GermanyGermany dealership location
6485 km
ready for operation (used)
Capacity: 150mm Bbh7p3rxjx Oil Volume: 5496cm³ Pressure: 250 tons For further informaton please contact us. more
4

Motorized Folding Machine KRAMER AMH II 1020x3,25

Staufenberg, GermanyGermany dealership location
6563 km
good (used)
Motor-driven folding machines Fabr. KRAMER type AMH II. Year absent Technical data: Usable length 1020 mm maximum sheet thickness 3.25 mm Gr. Opening of the upper beam 290 mm Gr. Adjustment speed of under and bending flange 90 mm Dimensions L x W x H 1600 x 700 x 1500 mm Weight approx. 1300 kg Ozbky3hup with: -Rear gauge -Foot switch - separate control panel used, in good condition more
6

Wheel loader Kramer 5085

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction Power: 55 kW (75 HP) Make of engine: Kohler Xobnd2ux EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 more
6
1 used plate shear Make KRAMER Kxwhz Type 1000 x 2.5 Built in 1976 Machine dimensions about everything: Length: 1500 mm, width: 2100 mm, height: 1220 mm. The machine is in good / very good condition. was used only for cutting of bakelite PCBs. She was taken into operation for the last time about 25 years ago. Price from stock 56291 Wiebel home: 3.000,00 EUR + VAT Changes and errors in the technical data, information and prices and subject to prior sale. more
1

Beading machine KRAMER SBMM s 70

Wiesbaden, GermanyGermany dealership location
6534 km
1988
used
metal sheet thickness: 1,75 mm spindle distance: 70 mm engine: 380 V, 1,1 kW 9wmmuhxxa space needed: weight: 180 kg more
6
Used Krämer & Grebe vacuum cutter capacity 500 litres Loading control cabinet, etc. Weight approx. 5000 kg. 83jsebezz Comes from a plant closure in Viersen due to acquisition of a reputable company! Three large factories of meat was only two adopted and one closed in Viersen! Ds3or0jwe Krämer Grebe VSM 500 ran up to the plant closure. Please send an offer by mail at serious interest! more
1

3-roller round bending machine Kramer R 45/1000

Muehlheim/Main, GermanyGermany dealership location
6573 km
1981
used
Performance: 1035 x 0.8 mm, Drive type: by hand, 822bgw3jb Weight: 150 kg more
6
Hydr. Table shears Fabr. BLEMAS type TK 2506 Masch.# 9612089 built in 1996 Technical data: maximum cutting length 2550 mm maximum sheet thickness 6.0 mm maximum operating pressure 195 bar Cutting angle adjustment 0.5-3.0 ° 3wnlym9sl Number of holders 12 Length 1000 mm front gauge Range back gauge 750 mm Working height 900 mm 7.5 kW Weight approx. 4.6 t External dimensions approx. 3440 x 2100 x 2060 mm with -CNC controlled rear gauge -Stop retreat being direction -Cutting leng... more
6

Wheel loader Kramer-Allrad KL31.5 - shovel

Sittard, NetherlandsNetherlands dealership location
6340 km
2017
used
Field of application: Construction E88tamv Power: 35 kW (48 HP) Make of engine: YANMAR EPA marked Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 more
3

MOT. Plate shear KRAMER TM II A

Rödermark, GermanyGermany dealership location
6579 km
1977
used
Technical data: J3papr -max. Working width 4040 mm -max. Material thickness at 45 kp/mm ² resistance 2, 5 mm - cutting angle 1 - 17 ° -Speed up to approx. 25 m / min -Rear stop with Handwheel adjustment 10-550 mm -Table width 300 mm -front angle stop links -4 stk support arms per 500 mm -Powered 400 V / 7.5 kW - space requirement approx. B 4950 H 1250 x D 1700 mm -Weight 5500 kg -with:-single stroke or continuous stroke preselected -E. - footswitch more
4

Folding machine KRAMER AM-aut II 2000/2,25

Wiesbaden, GermanyGermany dealership location
6534 km
1972
used
max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW Dfyp2yw rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm more
1

Beading Machine KRAMER SBMM 56

Berlin, GermanyGermany dealership location
6738 km
used
Material thickness: 1,25mm, roll distance: 58mm, roll diameter: 60mm, shaft journal diameter: 24mm, shaft diameter: 39mm, throat depth: 130mm, motor power: 0.75kW, length: 700mm, width: 350mm, height: 1200mm, weight: 170kg. Ncpqz more
1

Manual bending machines KRAMER AMS 1000 x 1,25

Staufenberg, GermanyGermany dealership location
6563 km
1972
used
Manual folding machine Fabr. KRAMER type AMS 1000 x 1.25 Masch.# 32223 built in 1972 Technical data: Usable length 1020 mm maximum sheet thickness 1.25 mm Opening of the upper cheek 85 mm Adjustability of the bending flange 20 mm Weight 195 kg Db377n7wm External dimensions approx. 1400 x 500 x 1200 mm with -Base used, in good condition more


kramer 2506
daily

New machines via email!

Stay updated!

to

to

Edit search
KRAMER 2506
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close