Used Label Die Cutting Machine for sale (91,158)

Year of construction: 1993, condition: used, Punching Machine Marumatsu SAPV-1612 Itsdpfx Asw Ra Nrogzjr Clutch replaced in 2024 Machine inspection and minor wear parts renewed in 2024 Additional spare parts worth €8,000 have already been ordered and will be installed by us before the sale.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Itjdpfev Nzpgox Agzsr Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 2025, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Isdpfjlyqpdjx Agzotr Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Itsdsukpcyjpfx Agzsr Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: used, An automated die-cutting press in 72 x 102 cm format Equipped with: Max. sheet size: 720 x 1020 mm Min. sheet size: 350 x 400 mm Pressing force: 2.5 MN (250 tons) Feeder and delivery without gripper bands Max. speed: 7,500 sheets/hour Quick-change system Suction head feeder Cutting area Itodpfx Agewvmgiszjr Stripping area and waste removal In good condition

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: Itodpfew E Iumox Agzor o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: good (used), Punching machine EDEL - Maximum capacity: 25to. - throat: 26 cm - height: 170cm - width: 65cm - Depth: 50cm Itjdjgn Rnxspfx Agzor Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, to avoid any misunderstanding, I would like to inform you that the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguities. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in description and subject to prior sale. The value added tax is shown separately on my invoices. Shipping with forwarding agent.

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Ijdjwvbm Ropfx Agzstr

Year of construction: 2025, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Itjdpfx Agjlyqrcozsr Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Condition: new, ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) Iedpfx Aswvidqogzstr - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency - High-durability polymer-coated upper roller - Optional table extensions available - Custom machines and tooling on request CE/UL certified – compliant with industrial standards

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Pneumatich clutch, Iodpstp T Hxjfx Agzjtr Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Feeder original RABOLINI, Review machine.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Isdpfsiklxbsx Agzstr We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: used, Roller die cutting machine for cardboard Itodswb Urkspfx Agzjr Roller die cutting machine for cardboard (disassembled into 3 parts with drive)

Condition: like new (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, overall weight: 3,500 kg, total height: 1,660 mm, total length: 3,300 mm, total width: 1,450 mm, Equipment features: Intermittent flat die cutting device Itodpfx Agswd Ik Eszor 1. Servo drive, heavy duty frame, high precision. 2. The die-cutting speed can reach 80 meters/minute. 3. Stable material pulling. Scope of application: various self-adhesive labels for daily chemicals, wine labels, food, cosmetics, medicine, electronics, etc. Applicable materials: molded paper, coated paper, tin foil, PET, PVC, PP, laser paper, kraft paper, glossy paper, diffusion paper, laminated copper foil, photoelectric film, conductive film, PC version of software, LCD conductive adhesive, EMI insulation material, foam, conductive foam

Year of construction: 2025, condition: new, Specification: Maximum sheet size 740 x 1060 mm Isdslyp Emjpfx Agzjtr Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Condition: used, Year of construction: 1980, operating hours: 5,464 h, functionality: fully functional, overall weight: 9,000 kg, Automatic die-cutter KAMA A1 POLYGRAPH KAMA TS 96-1 manufactured by DDR for die-cutting solid and microwave cardboard. Minimum sheet size 330x480, Itodpfxswb Uqgj Agzsr maximum size 650x945 year of manufacture 1980 weight 9 tons.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder Isdpfx Agjt H Nhhjzetr 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Itedpfxst H Nc Ss Agzjr Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 90L1201, Polar Mohr DC-M Punching Machine – As-new condition machine in top shape! Sales price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Condition: Hardly used – almost as-new Availability: Immediately available Description: For sale is a Polar Mohr DC-M punching machine in excellent condition – barely used and virtually as-new. This machine is ideal for precise punching of labels, tags, and packaging components, excelling in reliability and efficiency in daily production operations. Itedpfowuq Afex Agzer The DC-M is renowned for its user-friendly operation, compact design, and seamless integration into existing production workflows – a true quality product "Made in Germany". Technical highlights: • Precise punching quality with high productivity • Ideal for label production and small formats • Robust construction for long-term use • Compact footprint – also suited to smaller production areas • Operator-friendly interface Viewing by appointment possible. Sale ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Inquire now and secure an almost new Polar Mohr DC-M at an attractive price!

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Itsdpsv I D Shofx Agzor Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Itsdpfx Ajwhvq Iegzer Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Itodewty Eaepfx Agzer

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance Itedpfxsxzr Hpj Agzor • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Year of construction: 2007, condition: good (used), BOGRAMA DIE-CUTTING STREET Year of Manufacture: 2007 _____ Product Description: 1. 1x feeder 1: VS 550 2. 1x feeder 2: MAX 063-03 3. 1x front cut: BSM 450/220/15 Plus (accessories for flat punch available) 4. 1x head & foot trim: BSM 450/220/40 Plus 5. 1x delivery 1: STA 550 6. 1x delivery 2: SAB 550 7. 1x camera control Itodpfjv Rd S Hex Agzor 8. 2x conveyor belt short 9. 1x long conveyor belt 10. accessories (knife, hold-down device, roller guide) Machine Specifications and Equipment:  Size: 210mm x 550mm _____ Accessories Included:  Manuals  Keys  Etc. _____

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton) Itsdpfxexvwcxo Agzjr