Used Lamination Bandsaw for sale (1,273)

Condition: good (used), Primultini cutting band saw Roll diameter 1300mm Roll width 140mm Duedjd Sclhjpfx Afnsn with Planomatic system

Condition: excellent (used), Raimann B4 cutting band saw Dedpfx Ajdyccdefnsun

Condition: excellent (used), 1 x AEW 350 Bandsaw - full working order. 415 Volts - 3 Phase. Heavy Duty - professional Machine. Duodpfex Swy Eox Afnen

Condition: excellent (used), Kolbe stainless steel bandsaw Heavy duty roller table used for carcass's Model K430 H Table size 1,050 mm front to back Dusdpfx Aoxpfluofnon Width 830 mm Maximum cut height 480 mm Safety interlocked doors Braked motor 4 Kw

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Fixed table Dusdpfxevzmmue Afnsn Excellent condition

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type Dujdpfxjcr Ru De Afnsn negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm Dedpfoxliguox Afneun With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Djdoxlfwpepfx Afnoun Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: refurbished (used), functionality: fully functional, The Mado Industrial Bandsaw Model: Selekta2 is a robust and reliable cutting machine designed for high-precision, heavy-duty processing of large pieces of meat (with or without bone), poultry, and fish. Performance & Precision Djdpfx Afjxxn Ikoneun Large Cutting Capacity: Offers a Max. Cutting Height of 340 mm, allowing it to handle large blocks of frozen or fresh product. Generous Working Area: Features a large Working Table surface of 680 x 680 mm, providing ample space for maneuvering large cuts. High-Speed Cutting: Utilizes a precise bandsaw blade for fast, clean, and accurate cuts. Operational Benefits Industrial Construction: Built on a sturdy, stainless steel frame, ensuring stability, durability, and resistance to corrosion in demanding environments. Maneuverable Design: The machine is fitted with wheels, making it easy to move for positioning or for cleaning the work area. Hygienic and Accessible: The stainless steel material and open design (as pictured) are built for easy washdown and adherence to hygiene standards. Compact Dimensions: Has Dimensions of 850 x 800 x 1700 mm (L x W x H), offering a powerful tool in a manageable footprint.

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Dsdpfx Afoxiv Ugenoun Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight Dedoxivgcopfx Afneun The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Djdpfjx A Tbwex Afnoun Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Djdpfx Aowuzzrofnsun

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Dusdpfx Afewu Agcenjn Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Dodpfxsydp Uds Afnsun Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: used, Year of construction: 1996, Year: 1996 Dedoydp Tmepfx Afnoun Serial Number: 15126 Model: H-360HA Blade Size: 4420MM x 34MM x 1.1MM Blade Speed: 20 – 120 m/min Hydraulic Cutting Capacity: 360MM X 360MM

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Dujdpfeydnxnox Afnsn Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: new, The B 200 S is a robust Horizontal Mitre Cutting Bandsaw designed for efficient and precise cutting in industrial workshops and one-off production settings. As an entry-level model in the Semi-Auto Bandsaw category, this KNUTH machine features a swiveling saw frame that allows for miter cuts of up to 45 degrees, enhancing versatility for various tasks. The infinitely variable saw frame feed is controlled by a hydraulic valve, providing precise adjustments even during operation. Built for durability, the one-piece cast-iron saw frame and low-maintenance V-belt drive ensure consistent performance while minimizing vibration and noise. Equipped with a coolant system, quick-release device, and mobile base, the B 200 S is engineered for ease of use. With a cutting capacity of 205 mm for round materials and 205 x 215 mm for flat materials, this Horizontal Mitre Cutting Bandsaw is a smart addition to any workshop. You can order online to take advantage of this reliable solution from KNUTH. Dedjuyh I Uopfx Afnsun

Condition: new, Introducing the HB 810 L, a top-tier Horizontal Mitre Cutting Bandsaw ideal for those in need of a reliable, semi-automatic cutting solution within the Semi-Auto Bandsaws group. This robust machine excels at cutting heavy workpieces made from steel, cast iron, and various other materials with precise accuracy. The HB 810 L boasts a dual-column construction for exceptional stability, while features like adjustable saw blade feed and variable cutting speeds from 20 to 100 m/min ensure optimal performance. Equipped with hydraulic workpiece clamping and an automatic stroke height adjustment system, this bandsaw minimizes downtime and enhances efficiency. With a substantial cutting capacity of 810 mm for round materials and 810x850 mm for flat materials, the HB 810 L is perfect for your industrial cutting needs. Contact us to request a quote and elevate your cutting operations with KNUTH’s exceptional machinery. Dusdpeyg Dibjfx Afnsn

Condition: new, The ABS 380 L is a cutting-edge horizontal straight cutting bandsaw from KNUTH, designed for high-performance sawing in the Auto Straight Bandsaw category. This fully automatic machine features a robust dual column frame that ensures superior stability, making it ideal for precisely straight sawing of large and heavy workpieces. The ABS 380 L offers a torsionally rigid steel construction complemented by high-quality linear guides, ensuring durability and accuracy during operation. With an advanced hydraulic saw frame feed design, operators can infinitely adjust the feed speed and cutting pressure for various sawing tasks. Additionally, the hydraulic workpiece clamping and optical detection of workpiece height enhance efficiency by automating crucial processes, substantially reducing operator workload. Standard equipment includes a saw-band, workpiece counter, and a coolant system, providing everything needed for reliable operation. For those seeking robust performance in horizontal straight cutting bandsaws, the ABS 380 L is an excellent choice. You can order online today and experience the exceptional capabilities of the Auto Straight Bandsaw. Djdsu E Imhepfx Afnjun

Condition: good (used), Year of construction: 2001, functionality: fully functional, Stock laminating machine Type: 134R5-1500 P Year: 2001 Max. sheet size: 1420x1620 mm Min. sheet size: 500 x 500 mm Dedjyhn Dfopfx Afneun Printing sheet: Paper from approx. 180 g/m² Cardboard from approx. 400 g/m² Carrier sheet: Corrugated board up to approx. 7.0 mm thickness Cardboard/solid board from 0.6 mm

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bandsaw blade dimensions: 4200 x 34 x 1.1 mm Cutting capacity at 90° (round): 320 mm Cutting capacity at 90° (flat): 500 x 300 mm Cutting capacity at 45° right (round): 320 mm Cutting capacity at 45° right (flat): 310 x 310 mm Cutting capacity at 30° right (round): 200 mm Cutting capacity at 30° right (flat): 200 x 180 mm Cutting capacity at 45° left (round): 280 mm Cutting capacity at 45° left (flat): 300 x 230 mm Cutting speed: 18 - 115 m/min Total power requirement: 4.5 kW Dujdpeyg Nk Rsfx Afnsn Machine weight approx.: 1,100 kg Space requirement approx.: 14,850 x 2,250 x 1,300 mm Accessories/Equipment: - Roller conveyors

Condition: new, The SBS 235, a versatile Horizontal Mitre Cutting Bandsaw from KNUTH, is designed for semi-automatic operations in industrial settings. This compact machine features a rigid vise with a lateral slide and a cast-iron saw frame that swivels up to 60° right and 45° left, enabling efficient cutting of various workpiece dimensions. The powerful motor ensures continuous operation, while the bi-metallic saw blade provides stability for heavy machining tasks. Equipped with an advanced coolant system and mechanical quick-action clamping, the SBS 235 streamlines your workflow, reducing downtime and enhancing productivity. Users will appreciate the easy manual feed for precise handling and the quiet operation during use. With capabilities to cut round pieces up to 225 mm and flat pieces measuring 150x245 mm, this Horizontal Mitre Cutting Bandsaw is perfect for small batches. Request a quote today for the SBS 235 and elevate your cutting operations! Dsdpfx Ajuxdfyefnoun

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Horizontal thin-cut band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. Duodpfx Afsydk H Uonsn For slats from 2 mm

Condition: like new (used), Year of construction: 2025, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees Dsdsydk Hnopfx Afnoun * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new