Used Lapping for sale (125)

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob Iedpfozcfytsx Ap Dstn * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Iodpozpcu Tofx Ap Dotn Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,393 h, Operating hours: 2393, First registration: 24.05.2022_____Price: 59,000.00 Euro netYear of manufacture: 2022Operating hours approx. 2200Max. lifting capacity: 3,300 kgMax. lifting height: 6,600 mmMax. reach: 3,500 mmLength to equipment carrier: 4,310 mmWidth: 2,100 mmHeight: 2,120 mmTotal weight with load forks: 6,500 kgTotal weight without load forks: 6,330 kgEngine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooledPower: 85 kW (115 hp)2,300 rpmStage VDiesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection(DPF + DOC + SCR)Hydrostatic drivePump: electronically controlled with variable flow rateEngine: variable displacement motorEPD TOP incl. with optional automatic increase in engine speedMineral hydraulic oil HVI 46Transmission2 gearsElectro-hydraulically controlledVmax = 1st gear / 2nd gear = 16 / 20 km/h, optionally 40 km/hCabinClosed cabinSplit door360-degree all-round visibilityGRAMMER air-suspended seat with safety lap beltROPS/FOPS certifiedHeatingFront, roof and rear window wipersSun visor4x1 joystick, electronic, with capacitive release incl. direction of travel switchTelescopic boom2-part with electronic end-of-stroke damping Soft StopEquipment carrierQuick-change systemType "ZM2", hydraulically controlled from the cabinSteeringHydraulic steering3 steering modes:All-wheel drive, front-wheel drive, crab steeringDrivePermanent all-wheel driveAxlesFront axle fixedRear axle oscillatingBraking systemServo-assisted disc brakes on all four drive axles, automatically actingParking brake when engine is stoppedHydraulic systemPump with variable flow rate, type "LOAD SENSING"Flow rate working hydraulics: 125 l/minFlow rate hydraulic fan: 46 l/minTotal flow rate: 171 l/minWorking pressure: 210 barFlow-sharing control blockElectrical system12 VBattery with 100 AhAlternator 120AStabilization controlSimplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition and overload shut-downSpecial equipmentTires 400/70-24 158A8Rear hydraulic connection with separate controlEU approval as a tractor/agricultural tractor40 km/hTrailer coupling, height-adjustable, self-locking, 30/32 mm pin, incl. connection for trailer lightsAir conditioningVibration damping on the boom (B.S.S.)LED rotating beacon on cabin roof (approval is the customer's responsibility!)LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen headlights2 work lights at the end of the first arm (basic arm)ASCS upgrade: screen with all ASCS functions + continuous flow in the frontLocation: 54595 Prüm Ijdpfx Aoupq Tqsp Djtn

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Itedpfxox Tt T Rs Ap Don Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 1298852, Opening 4-4, Products With or Without Overlap, Optical Scanning System, Additional Parts for Processing Thin Print, Max. Signature Length 510mm, Max. Speed 12,000/Hour, Mech. Speed 18-200 cycles per minute, max. Book Sizes, min. signature length 120 mm (4-3/4˝), max. signature length 510 mm (20-1/8˝), min. signature width 80 mm (3-1/8˝), max. signature width 320 mm (12-5/8˝), max. signature thickness 4 mm (5/32˝), Lap for sword opening min. 8 mm (5/16˝), high folio or low folio, Number of stitches standard 13, staggered 7, Stitch length 16.5 mm (2/3˝). Itodpeza Uxtjfx Ap Djn

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 CNC grinding machine, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power with speed control, easy-to-use CNC control with automatic grinding cycle, roughing, finishing, lapping, and deburring. The machine features a surfacing head mounted on the spindle housing with compensation. The machine has been professionally overhauled by us, the grinding spindle has been fitted with new bearings, and the guide rails have been newly scraped. The machine meets the geometry of a new machine and is therefore immediately ready for use. Accessories: Electro-permanent magnetic chuck 800 x 400 mm, coolant tank with paper filter system, partial enclosure. All functions have been tested, and the machine can be demonstrated under power. We would also be happy to take care of the installation and training on site. Financing/leasing is no problem; we would be happy to provide you with an offer! Ijdorpz Evjpfx Ap Detn

Year of construction: 2001, condition: good (used), Flap element, roller conveyor, driven, Mosa - second-hand - : Price ex location: 500.-€ (net), dismantled, packed and loaded! Manufacturer: Moca Type: RF Year of construction: 2001 Itodpfeu Dk Hhsx Ap Djn driven Element length: approx. 1m Element width: approx. 72cm Roller length approx. 65cm Roller diameter approx. 4.5cm 400V, 1.1kW, 50Hz, 2A, Condition: good Available: immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 629013, Opening 4-4, products with or without an over fold, additional parts for processing thin printed sheets, max. signature length 510mm, max. speed 12,000/hour, mechanical speed 18-200 cycles per minute, max. book sizes, min. signature length 120 mm (4-3/4"), max. signature length 510 mm (20-1/8"), min. signature width 80 mm (3-1/8"), max. signature width 320 mm (12-5/8"), max. signature thickness 4 mm (5/32"), lap for sword opening min. 8 mm (5/16"), high folio or low folio, number of stitches standard 13, staggered 7, stitch length 16.5 mm (2/3"). Itjdpfxjza Uy Do Ap Den

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, machine/vehicle number: WSVS5H2S2T1742953, mileage: 11 km, power: 54.5 kW (74.10 HP), overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 3,400 kg, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, tire size: 225/70 R15C, wheelbase: 1,820 mm, gearing type: hydrostat, loading space volume: 2 m³, Equipment: air conditioning, cruise control, Schmidt Swingo 200+ 2-Brush New vehicle Mileage: 11 km Operating hours: 4 h Tires: 225/70 R15C Price on request Equipment: Base machine 224901 Compact sweeper Swingo 200+ 2-brush system Drive options 225101 Euro 5 engine 55 kW (75 hp) 225201 500 h long-life oil Speed 225404 50 km/h Itjdpfjz Euadjx Ap Don Vehicle options 225300 Hydropneumatic suspension 231601 Rear impact protection 231701 Noise reduction, cab & container 231803 Manual central lubrication Cab options 187001 Steering wheel knob 226502 Radio DAB+ 226601 Rearview camera 226701 Suction nozzle camera 226801 Reversing warning, can be switched off 226901 12 V socket 227001 Heated exterior mirrors 227101 Blind spot mirror in cab 235002 Multi-image monitor Seat options 226201 Air-suspension seat with integrated 3-point seatbelt 226401 2-point lap belt for passenger Lighting options 230701 360° LED warning modules 231101 LED work lights on cab roof 231301 LED tail lights 244501 LED ambient lighting Sweeping unit options 228503 Mixed (poly/steel) 228801 Roller suction nozzle instead of skids 2-brush system 227301 Independent brush control 227401 C-shaped brush arms 227601 Weed brush system, C-shape 228701 17 mm rubber suction nozzle Sweeper container options 229201 Hand suction hose preparation 244801 GEKA cleaning connection for blower Color 190701 Standard paint RAL 9016 white Accessories 1317SWINGO Operating manual 232601 Wheel chock with holder Other equipment 100901SWINGO Modem kit IntelliOPS SSR 3214 Additional LED reversing light Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee. Our general terms and conditions apply. Location: Ahlborn GmbH Commercial Vehicles Hafenstraße 18 31137 Hildesheim Inspections and/or test drives only by prior appointment. Please coordinate by telephone before arriving, as the vehicle/equipment may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Itjdpfjyv S Ufjx Ap Dsn Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Ijdpfx Apjpcht Hj Detn

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,354 h, maximum speed: 40 km/h, Operating hours: 1354, First registration: 10/11/2022. Basic equipment / technical data: max. load capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, length to carriage 4,730 mm, width 2,310 mm, height 2,530 mm / 2,590 mm (CS activated), total weight with forks 8,170 kg, total weight without forks 8,000 kg, engine 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 105 kW (143 hp) at 2,300 rpm, hydraulic reversing fan, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: swashplate motor, EPD TOP including optional automatic speed increase, mineral hydraulic oil HVI 46, transmission 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, V3611 GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS tested, heater, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive activation including direction switch, CS = hydropneumatic vibration damping of the cab, telescopic boom 2-part with electronic end damping "Soft Stop", carriage quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped, frame construction: in high-strength steel, hydraulic system: pump with variable flow rate of type "LOAD SENSING", flow rate working hydraulics: 150 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 196 l/min, working pressure: 250 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120 A, stability control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload cut-off, tires: 460/70 R 24 Michelin XMCL, standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grille on the carriage, lighting for road travel, automatic battery master switch, electrical connection cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, self-locking, 30/32 mm pin, including connection for trailer lighting, height-adjustable version recommended for compact and medium, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the responsibility of the customer). Itodpfotu Sztox Ap Dsn

Condition: used, Year of construction: 2025, _____max. load capacity 3,000 kgmax. lifting height 6,700 mmmax. reach 3,800 mmLength to carriage 4,510 mmWidth 2,000 mmHeight 2,120 mmTotal weight with load forks 6,620 kgTotal weight without load forks 6,450 kgEngine 4-cylinder turbo diesel engineRehlko KDI2504 TCRwater-cooledPower 55 kW (75 hp) at 2500 rpmStage VOxidation catalyst (DOC) + diesel particulate filterHydrostatic drivePump: electronically controlled with variable flowMotor: variable displacement motorEPD PLUS incl. with optional automatic speed increaseMineral oil hydraulic fluid HVI 46Transmission 2 gearsElectro-hydraulically controlledVmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/hCab closed cabSplit door360-degree all-round visibilityAdjustable seat with safety lap beltROPS/FOPS Level 2HeaterFront, roof and rear window wipersSun visor4x1 joystick electronic with capacitive release incl. direction switchTelescopic boom 2-part with electronic end-of-travel damping Soft StopCarriage quick-change systemType "ZM2", hydraulically controlled from the cabSteering hydraulic steering3 steering modes:All-wheel drive, front-wheel drive, crab steeringDrive permanent all-wheel driveAxles Front axle fixedRear axle oscillatingBraking system servo-assisted disc brakes on all four drive axles, automatically activatedParking brake when engine is stoppedHydraulic system gear pump and load-sensing valveTotal flow rate: 100 l/minWorking pressure: 210 barElectrical system 12 VBattery with 100 AhAlternator 115 AStability control Simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload shut-offTires 400/70-20, agricultural lug profileStandard equipmentServo brakesRear plate for mounting a trailer hitchV2001 Preparation for additional function on the boom head2 hydraulic connections on the boom headLoad protection grid on the carriageLighting for road travelAutomatic battery disconnect switchElectrical connection cable in the boomAcoustic signal when reversingLifting cylinder support for securingStorage location: null Itodpfez D Rcxox Ap Don

Condition: good (used), Year of construction: 1996, Folding closure Itodpfjc Nw N Hsx Ap Djn

Condition: used, power: 85 kW (115.57 HP), overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 682 h, maximum speed: 40 km/h, Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control. Itodezdmtpjpfx Ap Don

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 100 t, operating speed: 9 mm/s, reverse speed: 14 mm/s, table width: 2,545 mm, table length: 10,000 mm, table height: 900 mm, total length: 10,200 mm, total width: 3,660 mm, total height: 2,900 mm, overall weight: 26,000 kg, pressure: 320 bar, MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES Iedpfxswkvmns Ap Dotn TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Ijdpfx Apouycgfj Djtn Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: reconditioned (used), ELB Perfekt BD 10 CNC, year of manufacture 1995, grinding area 1000 x 550 mm, grinding wheel 400 x 100 mm, 7.5 kW spindle power, easy-to-use CNC control with automatic grinding cycle, roughing, finishing, lapping, deburring, planer mounted on the spindle housing with compensation; the machine has been professionally overhauled by us, the grinding spindle has been newly fitted with bearings, the guideways have been newly scraped, the machine meets the geometry of a new machine and is therefore immediately ready for use. Accessories: Electro-permanent magnetic chuck 1000 x 550 mm, coolant tank with paper filter automatic system; all functions have been tested, and the machine can be demonstrated while powered on. We will also gladly take care of the installation and training on site. Financing/leasing is no problem; we will be happy to provide you with an offer! Iodpfx Apjz Eia Es Dotn

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 400 t, operating speed: 3 mm/s, reverse speed: 18 mm/s, table width: 2,520 mm, table length: 6,000 mm, total length: 6,000 mm, total width: 3,650 mm, total height: 3,250 mm, overall weight: 28,500 kg, pressure: 319 bar, The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Iedpfx Aewpgmvsp Djtn Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: not inspected (used), functionality: unexamined, Hartridge Diesel Injector Service Equipment – Injectomatic One + Injector Reconditioning Machine Manufacturer: Leslie Hartridge Ltd Country of Manufacture: England Machines Included 1. Hartridge Injectomatic One – Nozzle Reseating Machine 2. Hartridge Diesel Injector Nozzle Reconditioning / Grinding Machine _____ Description Complete diesel injector service equipment setup manufactured by Hartridge, a globally respected manufacturer of diesel fuel injection testing and service equipment. This package includes the Hartridge Injectomatic One nozzle reseating machine along with a Hartridge injector nozzle reconditioning / grinding machine, used for restoring and servicing diesel injectors. Itsdpfx Apjyx Sg Hs Don These machines were widely used in professional diesel workshops for injector maintenance and refurbishment. _____ Hartridge Injectomatic One • Diesel injector nozzle reseating machine • Used to restore worn injector sealing surfaces • Precision alignment and controlled reseating process • Timer control and emergency stop • Industrial workshop equipment _____ Hartridge Injector Reconditioning Machine • Precision injector nozzle grinding / lapping machine • Used for injector repair and refurbishment • Heavy-duty Hartridge engineering • Includes fixtures and tooling shown in photos • Ideal for diesel injector service workshops _____ Applications • Diesel fuel injection service centers • Agricultural machinery repair workshops • Truck and heavy equipment maintenance • Diesel engine specialists • Technical training facilities

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. Itodjhwhnyepfx Ap Don I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm Itjdeharupjpfx Ap Den -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame: made of galvanized sheet steel Iodpfx Aofccuzep Dotn -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. Iedpfx Apoz Sc T Uo Djtn * All information without guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 450 mm, reverse speed: 230 mm/s, throat depth: 375 mm, ram plate width: 650 mm, ram plate length: 450 mm, total length: 1,240 mm, total width: 1,950 mm, total height: 2,790 mm, overall weight: 3,820 kg, pressure: 290 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, Model CF-100/VR + frequency converter, inverter system. We have designed the CF/VR series C-frame motorized hydraulic presses in a range of three different capacities, from 80 to 150 tonnes. Specifically engineered for medium to high volume production processes such as stamping, die-cutting, and deep drawing. The new generation of CF/VR hydraulic presses offers versatile applications, making it possible to integrate these machines into automated production lines. They operate at hydraulic pressures below 290 BAR to ensure increased longevity of the entire hydraulic system. STRUCTURE AND TABLES: The CF/VR series hydraulic C-frame presses feature an electro-welded frame made exclusively of S355JR steel, stabilized and machined after welding to ensure perfect parallelism and high precision. The structure is designed and calculated using finite element analysis (FEA) software, guaranteeing our high standards for precision and quality at all times. Each press is equipped with upper and lower tables made of machined C45E steel, featuring DIN 650 T-slots. The upper table maintains perfect parallelism via four 50 mm diameter lateral cylindrical guides with maintenance-free, anti-friction, bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: The main cylinder is single-acting, with a lapped barrel, chrome-plated piston rod, and maintenance-free wear guides. For rapid approach and return movements, two double-acting lateral cylinders are fitted, also with lapped barrels, chrome-plated rods, and maintenance-free wear guides, enabling fast approach and return speeds. Iedpfxjwpg Uae Ap Dotn The motorized hydraulic unit includes a prefill valve for approach and return, and a fixed displacement pump for constant-speed operations. The assembly also features a check valve, pressure relief valve, cylinder decompression valve, and air-oil cooling system. ELECTRICAL INSTALLATION AND SAFETY: Standard equipment includes a SIEMENS SIMATRIC S7 1200 series PLC and a 7'' tilting touch screen panel (MPT-700 model), enabling programming of press force, cylinder stroke, and speeds, with storage for up to 300 programs. All electric and hydraulic controls are redundant and self-monitoring. An additional safety block and self-checking devices are installed for operational safety. Includes verification and certification of proper functionality and correct safety distances for photocell protection. Activation is via a low-voltage electric foot pedal. To guarantee safety, the presses feature type 4 PLe safety light curtains at the working area front, two fixed lateral safety guards with polycarbonate windows, and internal LED work lighting. Supplied with operator's manual. Fully complies with all essential health and safety requirements according to CE standards.