Used Laser Weld for sale (7,350)

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Codpfsxrpmzox Apvsrc Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Crjdpfjxp Iw Hex Apvec Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: excellent (used), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to connect plastic parts precisely, energy-efficiently and quickly. This creates strong and resilient welds that are free of marks on the visible side. This means that plastic welding using laser technology also meets the highest aesthetic demands. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Main fuse: 25 A Csdpfx Aohr Dliepvorc Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Ytterbium Fiber Laser. The laser welding gun LSS5 M completes the series as a compact welding tool. With laser powers of one to four kilowatts, integrated cooling technology and convenient control unit this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet pairings or aluminium. Trifocal technology 3500W laser gun Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Codpjhh H Rmsfx Apverc Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 - 600 Power requirement 3500 W laser power Laser Duty Cycle 30% (with cooler) 3.5 kW Dimensions, controllerW × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding gun LSS-5M-3500-3F Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms Credpjxp Iybjfx Apvsc 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring Crsdpfx Aog Sfdlspvjc - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included Cjdpfx Asup Uzxspverc One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Crodpfx Apjthigrovoc Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Credethit Espfx Apvoc Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications Codjrumymopfx Apvjrc laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S Credshufigepfx Apvjc The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2025, Equipment: CE marking, Welding, cutting and cleaning fiber laser machine Cjdpew Srtfefx Apvjrc

Year of construction: 2013, condition: ready for operation (used), A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible. Cjdpfx Apev Rfrbevorc

Condition: used, Föhrenbach Laser Welding System Crjdoxbcwxspfx Apvjc Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Data sheets are available as PDF files. Complete data package (4 folders). As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Year of construction: 1910, condition: as good as new (ex-display), Laser Welding Head Laser Processing Head HIGHYAG Laser Technology PDT as good as new from stock clearance, probably never used incl. (everything as shown): - Focusing module 0,75; Lambda = 900-1060nm - PDT Zoom Collimation Crsdpfx Apef Ucn Eovsc - Compact SGM 2 - Info Label: HAN: SE05010/1083: V4.9: 90 800 333 Control unit PDT: PDT-D

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: fume extraction, Trumpf HL 1003D laser unit Codpfx Aowxq H Eepverc Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. 2 optics with cameras.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Crjdpfxsrfucqs Apvoc Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Crjdey Nl U Sjpfx Apvec

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Csdpfx Apsxfrv Esvorc Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Creden Sl D Rspfx Apvoc

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation Csdswzv D Iopfx Apvorc - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. Credpfsvca Nrjx Apvoc when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser Cjdpfeyuvqmex Apvorc - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Technical Features - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system - Two-channel safety interface for access control (door contact switch) Crodpfx Apsyuvktsvoc - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, 🔥 FOR SALE: Fiber Laser Welding Machine — XTW-1000 (2020) A professional-grade fiber laser welding machine, model XTW-1000, manufactured in June 2020, is for sale. The machine is in excellent working condition and ready for immediate use. This unit is perfectly suited for precision welding of stainless steel, carbon steel, aluminum, copper, galvanized sheet, and various metal alloys. Laser welding is 4–10 times faster than conventional TIG/MIG welding, produces clean and smooth welds with minimal heat distortion, and requires little to no post-processing work. 📋 TECHNICAL SPECIFICATIONS • Model: XTW-1000 • Laser type: Fiber laser • Output power: 1000 W • Laser wavelength: 1080 nm • Laser spot size: 1–2 mm • Rated power: 7500 W • Supply voltage: 220V / 50Hz • Current: 30 A • Laser safety class: Class 4 • Serial number: 202005145 • Manufacturing date: 2020-06-01 • Certification: CE ✅ APPLICATIONS • Sheet metal processing & manufacturing • Stainless steel product & kitchen equipment fabrication • Automotive repair & bodywork • Elevator & staircase manufacturing • Tool & hardware production • Custom metalwork & repair workshops 📞 For further details and pricing — contact the seller! Crodpfxsyzcg No Apvec