Used Lathe Shaft for sale (11,160)

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm Dedeupxctopfx Acpjcn turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m Djdpfx Asz Idb Njcpecn - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Maximum turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Djdeyx U Itopfx Acpecn Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €31,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €38,500 excluding VAT This machine is available for inspection in Genk!

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Dcedpfjf Nb Hgex Acpon Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm turning length 1000 mm turning speeds 40 - 2000 U/min centre height 205 mm Dcodpfjwz Ruzex Acpsn spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray

Condition: ready for operation (used), functionality: fully functional, Maximum straightening pressure: 25 tons Valve stroke: 150 mm Includes straightening unit for shafts. Dcsdpfx Aez H Nldocpsn

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, A used VDF BOEHRINGER DUS 800 lathe. Turning length 2000-3000 mm. Dcjdez H N Hzopfx Acpon Includes accessories.

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: Dedez Ip Riepfx Acpscn - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: used, Year of construction: 1999, Cycle-controlled lathe Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control system D1 Operating hours: 28,506 Center distance: 1,000 mm Center height: 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over cross slide: 340 mm Max. diameter over tool rest: 600 mm Length of tool rest: 140 mm Dcodpfxozt S Svs Acpsn Max. workpiece weight: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-position turret Includes 1 new RÖHM chuck jaw! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg Available immediately 51026

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle lathe with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Dcjdpjzfqdnofx Acpen Technical data: Center height 350 mm Center distance 4000 mm Swinging diameter over bed 690 mm Swinging diameter over cross slide approx. 420 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions + chip conveyor L x W x H 7350 x 2450 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 fixed steady rest with rollers, internal diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, rotor diameter: 252 mm, number of blades: 30, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 90 rpm, input voltage: 400 V, AZR 600 18.5 kW 30 rotating knives with welded knife carriers, including 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Slide with pressure plate Vibration-dampening machine feet Automatic star-delta starter Automatic shutdown when the hopper is empty Dodpoz I R Shsfx Acpecn Control cabinet with 5 m cable and PLC control Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW - 400 V - 50 Hz - 3-phase Hydraulic motor: 0.75 kW - 400 V - 50 Hz - 3-phase Further information on the knife system: reinbold-entsorgungstechnik.com/files/prospekte/messer-rotor-sys teme-2021.pdf

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 00 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 2100 mm spindle head A8 DIN55027 spindle diameter 1 mm Djdpfx Acsz I T Raepecn spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system PARAT face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m

Condition: used, Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center Dsdpoz Alqdofx Acpscn 2 Axes: X, Z Model: TA 15 Year: 2015 CNC: Fanuc Series 32i-Model B

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Dcodpfxozzwgns Acpon Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: good (used), Year of construction: 2004, 569mm Swing, 419mm Max Turned Diameter, 640mm Between Centres, 10 Station Turret, 3500rpm 22KW Spindle, Fanuc I Control, Djdpfx Acozzzh Njpscn 24m/minute rapids, 250mm Power Chuck , parts catcher, Tool setter, Low Volt Light

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S Dedpjz Ar Ucefx Acpocn MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Djdewnhy Ispfx Acpocn Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 4,000 mm Turning height: 1,400 mm Travel range of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter - external, max.: 4,000 mm Dcodpfxjz Dif Es Acpsn Travel range of the cross slide: 850 mm Ram stroke - max.: 950 mm EQUIPMENT - Hydraulic chuck - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 INCLUDES Chip conveyor 4-position tool turret DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical refurbishment by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 2,800 mm Machining height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter – external, max.: 2,800 mm Spindle speed: 63 min-1 Travel of the cross slide: 620 mm Ram stroke – max.: 690 mm INCLUDES Chip conveyor 4-position tool turret Hydraulic chuck: 2,800 mm EQUIPMENT Tool holder CAPTO 6 Electric handwheel Dsdpfx Acsz Digcspocn Retrofit in 2009 DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine underwent a mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: ready for operation (used), Year of construction: 2008, turning diameter 500 mm swing dia. 800 mm turning diameter over bed 450 mm turning length 800 mm x-travel 360 mm z-travel 980 mm spindle turning speed range 3200 U/min max. torque on the spindle 235/939 Nm spindle bore 110 mm turret (x-stations) 12 control Fanuc 31i tailstock quill taper MT 4 total power requirement 30 kW weight of the machine ca. 7,6 t dimensions of the machine ca. LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor Dcodoz Ebvxjpfx Acpsn - Incl. additional high-pressure pump

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw Dcsdpjxdub Iofx Acpsn

Condition: excellent (used), Year of construction: 2015, feed length X-axis: 190 mm, feed length Z-axis: 515 mm, MAZAK QT SMART 100M (400U) C-axis driven tooling Year of manufacture: 2015 Control system: Mazatrol Smart Chuck size: 6 inches Maximum spindle speed: 6000 rpm Spindle bore: 45 mm Maximum turning diameter: 280 mm Z-axis travel: 515 mm Dsdpfoz E Ryysx Acpscn X-axis travel: 190 mm Programmable tailstock Tool probe Coolant tank with pump (no chip conveyor) Documentation 4 driven tool holders (3 angled, 1 straight) 10 standard tool holders MACHINE CONDITION: IDEAL - only 1000 operating hours.

Condition: used, Year of construction: 2004, turning diameter 320 mm Dcodpjz Icz Usfx Acpsn turning length 305 mm control Fanuc weight of the machine ca. 3500 kg

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; chip conveyor; Dcodpfx Asz Ea E Ejcpjn various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. Dedozhn Shspfx Acpecn For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Excellent for learning woodturning. Suitable for both small and large bowls.