Used Liebherr 944 for sale (257)

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm Lhsdpoxc E H Sefx Agzsr max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: used, mileage: 1 km, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 10x8, fuel: diesel, suspension: hydraulics, Year of construction: 2025, = Additional options and accessories = - 10x8 - Hydraulic suspension = Further information = Axle configuration Tyre size: 445/95 R 25 Suspension: hydraulic suspension Front axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100% First middle axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Second middle axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Ljdexpf Trepfx Agzshr First rear axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Second rear axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Weights Unladen weight: 60,000 kg Functional Lifting capacity: 230 kg Crane: Year of manufacture 2025 Condition Damage: none

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 10,000 operating hours Approx. 36,000 kg Lsdpfoxq A Dkox Agzjhr 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system 140 cm digging bucket

Condition: good (used), Fuchs Terex MHL430 machine for sale. Lhsdpfxopq R Sxj Agzjr The machine is from 2002. Liebherr 924 Litronic machine for sale. The equipment is from 2007

Condition: used, Year of construction: 2007, operating hours: 14,100 h, Equipment: ABS, Scania G LTF 1045 14010 h OW 122,000 km / UW 35-meter mast very good RUST-FREE condition second owner no pending repairs major service in 12/2023 OW inspection 23.05.2024 all inspections can be newly performed at handover Wire rope from 2024 everything dry OW air conditioning Lsdper Icl Dofx Agzshr UW air conditioning UW bed Tires 85% brakes new / clutch new / in use with us Photos are from 2024 Errors or typographical mistakes excepted.

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Lhodpfx Agsxl E Afjzor

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA Lsdpfxewzmpze Agzohr weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: ready for operation (used), Specifications Manufacturer LIEBHERR Model LC 502 CNC Year 1984 Lodpfsxqmbtex Agzjhr Condition Used Serial Number 0501/5 Stock Number DCR1746 Max working diameter 500 mm Max module 10 Table Diameter 400 mm Min number of teeth 8 Hob head inclination angle ±50° Hob speed revolution 480 rpm Description Equipment Retrofitted in 2011 CNC Siemens 840D

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Ljdpsw T R Aujfx Agzjhr Max. wheel diameter: 280 mm Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: used, functionality: fully functional, machine/vehicle number: 145202, Year of construction: 2017, operating hours: 17,500 h, load capacity: 40,500 kg, lifting height: 14,300 mm, fuel type: diesel, mast type: telescopic, construction height: 4,980 mm, power: 230 kW (312.71 HP), empty load weight: 72,500 kg, drive type: Diesel, construction width: 4,490 mm, Full-container reach stacker Chassis number: 145202 Mast type: Telescopic Transmission: Liebherr hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Ljdpfx Asw N Tzrsgzjhr Front tyre size: 18.00-25 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 18.00-25 Rear tyre condition: 40 - 60% Description: Intermodal = Piggy Back Side shifter, Full cab, air conditioning, Central lubrication, camera

Condition: used, functionality: unexamined, machine/vehicle number: LGPv 1420, Used Liebherr Laboratory Freezer Manufacturer: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Manufactured: 2016 Details: Capacity: 1427 litres External dimensions (W x D x H): 1430 x 830 x 2150 mm Internal dimensions (W x D x H): 1250 x 700 x 1550 mm Complete with 8 shelves, max. load 60 kg Temperature range: -10 to -26°C Energy consumption: 8.887 kWh/24h Dynamic freezing system with fan Automatic defrost With lock and on castors Door, steel-white Weight approx. 219 kg Ljdpfx Aexiw Uujgzehr

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 12,845 h, LIEBHERR LH30M. Year: 2018. Hours: 12,840. Four grapples. Solid tires. Hydraulic cabin. Industrial boom. Industrial stick with cylinder. With front grill. Very good condition. Ljdpfx Agsxl Ex Tjzohr

Condition: good (used), Year of construction: 2007, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Liebherr LH 90 table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power requirement Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t Lhodpfx Aswzmp Iogzor dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: excellent (used), power: 120 kW (163.15 HP), overall weight: 25,000 kg, Year of construction: 2017, Equipment: air conditioning, cabin, hammer hydraulics, hydraulics, LIEBHERR R924 LC ZSA/Auxiliary Hydraulics/Air Conditioning/2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of Manufacture: 2017 • Operating Hours: 13,376h • Weight: 25,000kg • Power: 120kW/163hp • Hydraulic slewing ring bushing NEW from Liebherr • Newly sealed by Liebherr • Hydraulic pump NEW from Liebherr • Hydraulic pump finely adjusted NEW from Liebherr • Particle filter NEW from Liebherr • Valves NEWly adjusted • Oilquick quick coupler • Mono boom • Central lubrication system • Auxiliary hydraulics hammer grapple • Auxiliary headlights • Cab protection • Panoramic view cameras • 85% track condition • Air conditioning • Heated seats • German machine • Ready for immediate use _____ You can also have the description in another language by Email • Our Services Ledpfx Ajv U A R Nogzjhr • • - Export declaration, customs registration, yellow temporary license plates, red customs license plates. • - Purchase of your used construction machinery or commercial vehicle • - We help with financing • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly changing and is always up-to-date on our website. • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sales subject to our terms and conditions.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Lhodpfow T R Ahox Agzer Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: good (used), Liebherr GKv 6460-20K with Umluftkühlung Der Liebherr Gastronormkühlschrank Gkv 6460-20 with Umluftkühlung is suitable for the Gastronorm GN 2/1 produced. Repairer: Liebherr ProfiLine Gastronormkühlschrank Gkv 6460-20K / 001 Automatic Abtauung Tür- und Temperaturalarm Digital Display Feuchtigkeit in 2 Stufen Dichtung wechselbar Schloss ohne Schlüssel Türanschlag wechselbar SwingLine Tür mit Stangengriff Stand füße high adjustment bar Weiße Roste, up to 60 kg Cleaning sablauf Fugenlos Innen weiß Kunststoff Gastronome GN 2/1 Umluftkühlung Temperature range +1°C to +15°C °C Gross volumes: 663 liters Kühlmittel: R 600 a Connection: 220-240 V ~50 Hz Lhodpfx Agjxg Ihmjzer Inner size (HxWxD) 1710 x 650 x 581 mm Dimensions (HxWxD) 2064 x 750 x 750 mm Height Stellfüsse: 150-180 mm Weight: 96.0 kg More articles - new and used - can be found in our online shop! International shipping costs on request!

Condition: used, mileage: 78,500 km, power: 270 kW (367.10 HP), first registration: 07/2003, fuel type: diesel, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: red, gearing type: automatic, Equipment: ABS, crane, I am offering our Liebherr LTM 1060 here. The crane is in very well-maintained condition as it has always been stored indoors. All maintenance has been carried out regularly. * Operating hours: 19,464 * Tyre size: 16.00R25 * Suspension: hydraulic * Differential lock * Axle load: 12,000 kg * Max. lifting capacity: 60 tonnes * Automatic transmission with retarder * This is a German crane Get in and start working. Errors and misprints excepted. Lsdpfsxl Nkaox Agzohr

Condition: used, Equipment: soot filter, - Air conditioning- 3x shovels- Powertilt- Top conditionSuspension: Ledpfsvdpn Tsx Agzohr Hydraulic

Condition: used, Year of construction: 2021, operating hours: 1,090 h, * Radio * Fork * Bucket * Quick coupler * Year of manufacture: 2021 * Power: 50 kW * Operating hours: 1,090 hrs. -----Internal vehicle number: 11345----Subject to errors and prior sale Lhsdpfoxchrqex Agzsr

Condition: excellent (used), Specifications Manufacturer LIEBHERR Model LC 282 CNC Condition Used Stock Number Factory Ledpfx Agjxgpqcjzohr Max working diameter 280 mm Module 7 Worktable diameter 250 mm Worktable revolutions 100/200 rpm Min-max distance btw workpiece and hob 30 - 300 mm Hob head inclination angle 45° Max hob diameter 160 mm Machine weight 12500 Kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Ledpfx Ajw T Ry Tegzshr Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: excellent (used), Liebherr Gastronorm Refrigerator with Convection Cooling The Liebherr Gastronorm Refrigerator GKV 6460-20 is designed to fit the Gastronorm GN 2/1. Manufacturer: Liebherr ProfiLine Gastronorm Refrigerator Gkv 6460-20 Automatic defrosting Door and temperature alarm Lsdsxg H Aiepfx Agzshr Digital display 2-level humidity control Replaceable seal Lock Reversible door hinge SwingLine door with bar handle Height-adjustable feet Galvanized shelves, up to 60 kg Cleaning system Seatless White plastic interior Gastronom GN 2/1 Convection cooling Temperature range +1°C to +15°C Gross volume: 663 liters Coolant: R 600 a Connection: 220-240 V ~50 Hz Interior dimensions (HxWxD) 1710 x 650 x 581 mm Exterior dimensions (HxWxD) 2064 x 750 x 750 mm Height of adjustable feet: 150-180 mm Weight: 96.0 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm max. module: 5 min. module: 1 weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,84 x 2,8 m min. number of teeth: 7 toolpiece turning speed range: 4000-10000 U/min tool length: 210 mm With tail stock No dressing device Lodpjwv Ug Refx Agzshr Only CBN *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 Lodpfx Aswh Dlmjgzohr min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm CBN *

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1191, rotational speed (min.): 4,000 rpm, rotational speed (max.): 10,000 rpm, tool length: 210 mm, TECHNICAL DETAILS Largest workpiece diameter: 180 mm Module range: 1 - 5 Minimum number of millable teeth: 7 Milling head swivel angle: ±35° Resolution accuracy: 0.1 degrees Workpiece table load: 17 kN Tool data Infinitely variable tool speed range: 4,000 - 10,000 rpm Number of tool threads: 1 - 7 Tool diameter for generating grinding: max. 145 mm Tool diameter for form grinding: max. 175 mm Lhodpfewmb Amox Agzjr Tool length: max. 210 mm Total tool travel in the V-axis: max. 200 mm Shift travel from machine center - plus (+) direction: max. 100 mm Shift travel from machine center - minus (-) direction: max. 100 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Maximum rated current: 65 A Fuses in the supply line: 80 A Ambient temperature: +15 °C - +38 °C Relative humidity: max. 90% at 20 °C Relative humidity: max. 50% at 38 °C Operating noise: 80 dB(A) EQUIPMENT - With counterholder - No dresser - CBN wheels only